Hey Learners! Welcome to The Engineering Projects. We hope you are doing great. Our team is working on transistors and today, we'll design a circuit for using the 2N2222 Transistor. In this chapter you will learn:
What is H Bridge with 2N2222 Transistor?
How do the 2N2222 Transistor works?
What is the working of H Bridge?
How can we run the circuit of H Bridge in Proteus using 2N2222 Transistor?
By the same token, you will also learn important information about the topic in DID YOU KNOW Sections.
Introduction to H-Bridge
In electronic circuits, the direction of quantities like the flow of current, EMF, Electric field lines matter a lot. The H Bridge is used to control such motors through its specialized circuitry. The H Bridge is defined ...
Yesterday, I have posted a new Arduino Lilypad / Nano Library for Proteus in which we have seen how to add that library into Proteus so that you could be able to use these boards in Proteus. That was quite easy. Today I am gonna post a small project in which we will see how to use that library and produce an Arduino Lilypad simulation in Proteus. In this Arduino Lilypad simulation in Proteus, I am gonna use obviously he Arduino Lilypad board along with few LED lightsand will make them blink. Its also quite easy and you can also download the simulation and the hex file at the end of this project but I would suggest you to do it yourself so that you learn something out of it.
Before starting this project, you must have first integrated the Arduino L ...
Hey Learners! I welcome you on the behalf of The Engineering Projects. I hope you are doing Great. If you are seeking for the best information about the T Flip Flop along with some small concepts and the Practical Performance, then you are at the right article. In this session you will get the following topics:
What are T Flip Flops?
What are the Functions of Preset and Clear Input in T Flip Flop?
How can we Design the Truth Table of T Flip Flop?
How can you perform the T Flip Flop simulation in very simple and useful way?
Moreover, you will also get some pieces of information in DID YOU KNOW sections. so without wasting time, lets Jump into the answer of 1st Question.
T Flip Flop
T Flip Flop belongs to the family of Flip Flops and Latche ...
No.
Proteus Tutorials
Give Your Suggestions !!!
1.
Getting Started With Proteus
2.
Circuit Designing of LCD with PIC on Proteus ISIS
3.
Knowing Components Available in Proteus
4.
How To Use Virtual Terminal in Proteus ISIS
5.
How To Use Oscilloscope in Proteus ISIS
6.
DC Motor Drive Circuit in Proteus ISIS
7.
Stepper Motor Drive Circuit in Proteus ISIS
8.
Servo Motor Drive Circuit in Proteus ISIS
9.
Component Designing in Proteus ISIS
10.
PCB Designing in Proteus ARES
Hello friends, hope you all are fine and enjoying good health. In this tutorial, my actual plan was to cover the mostly used components in Proteus like to give users an overview of component selection as there are many components in Proteus whic ...
Hello everyone, I hope you all are doing great. In today's tutorial, I am going to show you How to add new Library in Proteus 8 software. As we all know that Proteus doesn't have all the components in its database so if you want to add a new component in Proteus and want to use it in your simulation, then you have to add or install the Proteus library first.
On our blog, we have posted many Proteus Libraries for Engineering Students, I have given Proteus library zip file download link in each post and I hope you guys have enjoyed those libraries. But I was constantly getting this complaint from students that they are unable to add Proteus Library, especially in Proteus 8 software. So, that's why I thought of writing this tutorial, although it sa ...
Update: Here's the latest version of this library: Arduino Mini Library for Proteus(V3.0).
Hi Guys! I welcome you on board. Today, I am going to share a new version of Arduino Mini Library for Proteus V2.0. This library is a successor of Arduino Mini Library for Proteus and the new Arduino Mini model is compact, small-sized, efficient, and more powerful.In the previous post, I shared the Arduino UNO Library for Proteus V2.0, where we have simulated UNO in Proteus. In this tutorial, we will simulate Arduino Mini in Proteus. First, we will download this library and then will use it in our Proteus software to simulate Arduino Mini.
Before we read further, let’s have a look at what is Arduino Mini.
What is Arduino Mini?
Arduino Mini board is a small-sized, robust, application-t ...
Hello readers! I hope you are doing well. Today, we are going to explore the MC34063 buck converter library for Proteus. An MC34063 buck converter is a type of DC-DC power converter that steps down the high voltage to the low voltage. It’s a popular device to get lower DC volts because it provides a stable output. By default, Proteus software does not have the buck converter; therefore, I designed the library for the simulation of the projects with this converter. In this tutorial, I’ll discuss the basic introduction to Buck Converter and Proteus library installation, and will also share the most basic simulation to see how it works.
Introduction to the MC34063 Buck Converter
The Buck converter is a step-down DC-DC converter that decreases the voltages while increasing the current and pr ...
Hello Learners! Welcome to The Engineering Projects. In the previous tutorial, we discussed the first universal gate i.e. NOR Gate and simulated it in Proteus. Today, we are going to focus on the second universal gate i.e. NAND Gate. We will also derive basic logic gates from the NAND gate, to prove its universality.
Today, we'll seek the answers to the following questions:
What is a NAND Gate?What is a Universal Gate?
NAND as a Universal Gate.
NAND Gate as Universal Gate in Proteus ISIS.
Let's get started:
What is a NAND Gate?
A NAND Gate is designed by inverting the output of AND Gate and thus it gives a LOW output when all of its inputs are HIGH, otherwise, it's HGIH.In order to design a NAND gate, simply place a NOT gate in ...
Hello friends, I hope you all are doing great. In today's tutorial, I am going to share a new Infrared Sensor Library for Proteus. This IR sensor is not available in Proteus and we are sharing this library for the first time. I hope it will help in your Embedded Systems Projects particularly related to robotics and automation. So, if you want to work on this IR Sensor then I would suggest you to first design its simulation and then try your luck with hardware.
There are different types of Infrared Sensors & modules available in the market. Some of these modules have transmitter & receiver on separate chips and are mostly get activated when someone interrupts the light. The one we have designed has a transmitter & receiver on a single c ...
Hello everyone, I hope you all are doing great. Today, I am going to share a new Heart Beat Sensor Library for Proteus. Using this Library, now you can easily simulate your Heart Beat Sensor in Proteus ISIS. I am quite excited while sharing this Library as it has never been designed before. All credit goes to the TEP team for creating this awesome Heart Beat Sensor Library for Proteus. You should also have a look at this Second Version of Heart Beat Sensor Library for Proteus.
Heart Beat Sensor is used to measure the Heart Beat Count of a person. When you are using a Heart Beat Sensor in hardware then there's a chance that you won't get the same results as this simulation because the placement of a finger on this sensor matters a lot. If you hav ...
