Hello friends, I hope you all are doing great. Today, I am going to share the new INA219 Current Sensor Library for Proteus V1.0 . The INA219 measures the current, the voltage and the power of a circuit at the same time, and sends all three to the Arduino over I2C. It is the sensor behind battery monitors, solar chargers, USB power meters and robots that know how much their motors draw. Now you can build and test those projects in Proteus, with the purple GY-219 module and a DC electronic load to measure. Behind the parts sit our own models , not a part that shows a number. The module's 0.1 ohm shunt is a real resistor in the analog simulation of Proteus, so the current of your circuit really flows through it. The INA219 measures the voltage across it and the voltage after it, does its own ...