Hello friends, I hope you all are doing great. Today, I am going to share the new BME280 Sensor Library for Proteus V1.1 . The BME280 is Bosch's small environmental sensor: one chip measures the temperature , the humidity and the air pressure , and the purple GY-BME280 board has made it a favourite for Arduino weather stations. With this BME280 Sensor Library for Proteus , you set the weather with sliders or one-click presets, and your Arduino reads it over I2C (or SPI) with the same Adafruit BME280 library you use on real hardware. Version 1.1 replaces the first version of this post. You now get two devices : BME280 Simple , with a weather panel on the schematic, and BME280 Advance , with a pop-up weather station and four measured sensor test tools . The model now follows the data sheet's ...
Hello friends, I hope you all are doing great. Today, I am going to share the new SX1262 LoRa Library for Proteus V1.1 . The SX1262 is Semtech's newer LoRa chip, and the green Ebyte E22-900M22S module with its rubber-duck antenna is a favourite for long-range sensors at 868 and 915 MHz. With this SX1262 LoRa Library for Proteus , two modules in one design talk over a simulated LoRa air, and your Arduino drives them over SPI with the same RadioLib library you use on real hardware. Version 1.1 replaces the first version of this post. You now get two devices : SX1262 Simple , with its control panel on the schematic, and SX1262 Advance , with a pop-up window and four measured LoRa test tools . The new SX1262 Arduino Proteus demo has two Arduino Mega 2560 boards that send packets, PING each oth ...
