Hi Pupils, Welcome to another Experiment of Proteus at The Engineering Projects. Previously, we saw what are the Junction Field Effect Transistors. Today we'll learn about some of the applications of Junction Field Effect Transistors.
Just before the Experiment, it is useful to revise that:
Transistors are three terminal, unipolar Devices. The terminals of Junction Field Effect Transistor are named as :
Drain
Source
Gate
The Gate Terminal is common to both Source and Drain.
Prior to start, let's clear some Concepts about Junction Field Effect Transistor.
Resistor
Resistor is an electrical device. we define the resistors as:
"A Resister is a two terminal Passive electrical device that shows the electrical resistance and is useful in almos ...
Hey, learners! Welcome to the next tutorial on Python with examples. We have been working with the collection of elements in different ways, and in the previous lecture, the topic was the built-in functions that were used with the sets in different ways. In the present lecture, we will pay heed to the basic operations of the set and their working in particular ways. We are making sure that each and every example is taken simply and easily, but the explanation is so clear that every user understands the concept and, at the same time, learns a new concept without any difficulty. The discussion will start after this short introduction of topics:
How do we declare and then find the difference between the two sets?
What are the built-in functions for operations, and how do we use them in the ...
Hello mentees! Welcome on the behalf of The Engineering Projects. We are here with a new lesson about the Digital Logic Circuits. Logic Circuits work as heart in many electronic Circuits. The topic of today is Full Subtractor in Proteus and you will find the answers of the following questions:
What are 2 bit Full Subtractors?
How can we design the Truth Table of 2 bit Full Subtractor?
How can we implement the 2 bit Full Subtractor in Proteus ISIS?
You will also learn some important chunks of information in the DID YOU KNOW sections.
2 bit Full Subtractors
A full Subtractor works really well in the processor. We’ll talk about it function but before that have a look at its definition:
2 bit Full Subtractor is a Combinational Logic that co ...
Hey Pals! We hope you are doing Great. Today, we are going to design another application of DLD Logical Gates i.e. Half Subtractor. In our previous lectures, we covered Adders in detail, where we studied both Half Adders & Full Adders. Now its time to discuss its reciprocal i.e. Subtractors.
In this session, we'll seek the answers to the following topics:
What is Half Subtractor?
Working Principle of Half Subtractor.
Truth-table of Half Subtractor.
Simulation of Half Subtractor in Proteus using three Logic Gates.
Designing of Half Subtractor with NOR gate.
So, let's get started:
What is Subtractor?The functionality of Subtractors is exactly the opposite of Adders(we discussed in previous lectures) and defined as:A Subtractor is a simple DLD Electronic circuit, d ...
Hey peeps! Welcome to an exciting tutorial on Python in which you will learn about the Python reverse list. We are on a series of deep learning phases where Python is under our observation. In the last tutorial, we saw the variables in Python and practised many codes in the TensorFlow. Today, we are interested to practice many interesting methods in an easy way. These are the built-in functions and you do not have to be an expert in the programming to perform them in TensorFlow. All you need is to read this tutorial and have the TensorFlow working fine. Before going deep into the topic, it is important to have a look at the list of content that you will learn today:
How do you define the python reverse list?
Why we should know about the python reverse list or keywords?
How do you practi ...
Hello friends, I hope you all are having fun. In today's tutorial, we will have a look at Series Clippers & their types in detail, we will also implement the simulations of Series Clippers in Proteus software. In the next article, we will discuss the next two types of Clippers i.e. Shunt Clippers & Dual Clippers. Today, We are going to learn:
What is a Clipper?
What are the types of Clippers?
Series Clippers Simulations in Proteus.
So, let's get started:
What is a Clipper???
Clipper (also known as Limiter) is an electronic circuit, which clips or limits the amplitude(positive, negative or both) of an AC source wave.
Diodes are normally used for designing Clippers and such circuits are normally referred as Diode Clipping Circuits (Diode Limiting Circuits).
...
Hey Geeks! Welcome to The Engineering Projects. We hope you are having a reproductive day. We know that sirens are the special sounds that are the symbol that something unusual is occurring or about to occur. You may have experienced the Siren of the Walkthrough Gates at the airport when a person having the knife or other forbidden material pass through it. Or you have heard the Siren of the ambulance and seen that all the traffic gives the way to the ambulance when they hear the special Siren of the Ambulance. The same is the case with the police Siren.
The Police sirens are the special sound and it is set with the help of 555 Timer Integrated Circuit. You will learn how can one design a Police siren using the 555 Timer circuit in this tutorial. ...
Hello students! Welcome to the new Python tutorial, where we are learning a lot about this programming language by applying the codes in a Jupyter notebook. It is interesting to see how simple codes with easy syntax can be useful to store, retrieve, and use data in different ways. Many things in Python are so unadorned and pre-defined that programmers may use them in a productive way without any issue.
In the previous lecture, we have seen the details of the sets and how different types of mathematical operations are used to get the required results. We have seen many codes, the examples of which were taken from day-to-day life. In the present lecture, the mission is to learn a new topic that is related to the concepts of previous lectures. Yet, it is important to have a glance at t ...
By 2027, the global additive manufacturing market is predicted to surpass USD 26.68 billion, showcasing an impressive growth rate of 14.4 percent, according to Reports and Data. As more benefits of additive manufacturing come to light like its flexible design and shorter production cycles, the industry has been tipped to be on the fast track to widespread adoption. Industries like the aerospace, medical, and automotive industries have all embraced 3D printing and the use of metals like alloy, titanium, and more recently, copper, to manufacture innovative and high-performance parts. This has also caused a spike in interest in the engineering sector, with more people pursuing an engineering degree. With the industry set to take off in the coming mont ...
Hi Learners! I hope you are having a productive Day. Welcome from the Team of The Engineering Projects. The digital logic circuit that we are learning today is 4-Bit Full Adder. In our previous tutorial, we designed 2-Bit Full Adder using Logic Gates in Proteus software. Today, we are going to design & simulate 4-Bit Full Adder using Logic Gates in Proteus.
We will discuss the following topics in today's lecture:
What is Adder?
What is Full Adder?
Working Principle of 4-bit Full Adder.
Simulation of four-bit full Adder in Proteus ISIS.
What is Adder?
Let's recall the Adder Definition from our previous lectures:
Adders are Digital Logical Circuits, specially designed to add two or more binary numbers or bits.In the world o ...
