module: RF Modules

3 articles found.

LoRa and RF Libraries for Proteus: Long-Range Wireless Simulation with Arduino

LoRa and RF Libraries for Proteus: SX1262, SX1278, RFM95W and RFM69HCW long-range simulation

Hello friends, I hope you all are doing great. Today, I am going to share a list of LoRa and RF Libraries for Proteus . LoRa radios can send a small message over several kilometres with very little power, so they are used in smart farms, water tank monitors, weather stations, city sensors and every project where the nodes are far away from each other. Long-range RF modules such as the RFM69HCW and the nRF24L01 PA LNA cover the middle ground, with more speed but less range. Testing long range on real hardware means carrying one radio away from the other and hoping your code does the right thing when the signal gets weak. Our LoRa libraries bring that test to your desk. Every module has a control panel and eight distance buttons from 10 m to 20 km, and a prediction line tells you whether you ...

RF Module Libraries for Proteus: HC-12, nRF24L01, CC1101, RFM69HCW and XBee

RF Module Libraries for Proteus: HC-12, nRF24L01, CC1101 and RFM69HCW simulation with Arduino

Hello friends, I hope you all are doing great. Today, I am going to share a list of RF Module Libraries for Proteus . RF modules let two Arduino boards talk to each other through the air, without any wire, router or mobile network. That's why we see them in remote controls, wireless weather stations, home automation nodes, robots and almost every wireless sensor network project. The tricky part of a wireless project is that you can't see what is happening between the two radios. Did the message leave? Did the other side receive it? Was the signal too weak? Our RF libraries answer these questions. In each simulation, two modules share one virtual radio band, a control panel shows what every radio is doing, and in most of them you can move the radios from a few metres to several kilometres a ...

HC-12 Library for Proteus V1.1 | 433 MHz Wireless Serial Module

HC-12 Library for Proteus V1.1 with HC-12 Simple, HC-12 Advance pop-up panel and two Arduino UNOs

Hello friends, I hope you all are doing great. Today, I am going to share the new HC-12 Library for Proteus V1.1 . The HC-12 is a small 433 MHz radio module that works like a wireless serial cable : whatever your Arduino prints into one HC-12 comes out of another HC-12, hundreds of metres away. It is cheap and simple, so students love it for remote controls, weather stations and wireless sensor projects. In this new version, you get two HC-12 devices in one library: HC-12 Simple with its control panel drawn right on the schematic, and HC-12 Advance with a modern pop-up panel full of test tools. I am also sharing a complete Arduino HC-12 Proteus simulation: two Arduino UNOs chatting over the air, each with our TEP Serial Monitor. NOTICE: We are really proud of this one. As far as we know, o ...