Hello friends, I hope you all are doing great. Today, I am going to share the new HC-12 Library for Proteus V1.1 . The HC-12 is a small 433 MHz radio module that works like a wireless serial cable : whatever your Arduino prints into one HC-12 comes out of another HC-12, hundreds of metres away. It is cheap and simple, so students love it for remote controls, weather stations and wireless sensor projects. In this new version, you get two HC-12 devices in one library: HC-12 Simple with its control panel drawn right on the schematic, and HC-12 Advance with a modern pop-up panel full of test tools. I am also sharing a complete Arduino HC-12 Proteus simulation: two Arduino UNOs chatting over the air, each with our TEP Serial Monitor. NOTICE: We are really proud of this one. As far as we know, o ...
Hello friends, I hope you all are doing great. Today, I am going to share the new SX1278 LoRa Library for Proteus V1.1 . The SX1278 is Semtech's long-range LoRa radio chip, and the Ai-Thinker Ra-02 board with its silver shield can and spring antenna is the most popular way to use it at 433 MHz. With this SX1278 LoRa Library for Proteus , two Ra-02 modules in one design talk over a simulated 433 MHz air, even 10 km apart, and your Arduino drives them over SPI with the same arduino-LoRa library you use on real hardware. Version 1.1 replaces the earlier version of this post. You now get two devices : SX1278 Simple , with its control panel on the schematic, and SX1278 Advance , with a pop-up window and four measured LoRa test tools . The new SX1278 Arduino Proteus demo has two Arduino UNOs tha ...
Hello friends, I hope you all are doing great. Today, I am going to share the new RFM69HCW Library for Proteus V1.1 . The RFM69HCW is HopeRF's small square sub-1 GHz radio, a favourite for wireless sensor networks because every message can be confirmed with an ACK. With this RFM69HCW Library for Proteus , two modules in one design talk over a simulated 433 MHz air, and your Arduino drives them over SPI with the same LowPowerLab RFM69 library you use on real hardware. Version 1.1 replaces the first version of this post. You now get two devices : RFM69HCW Simple , with its control panel on the schematic, and RFM69HCW Advance , with a pop-up window and four measured RF test tools . The new RFM69 Arduino Proteus demo has two Arduino UNOs, a node and a gateway, that ACK every message, PING each ...
Hello friends, I hope you all are doing great. Today, I am going to share the new CC1101 Library for Proteus V1.1 . The CC1101 is Texas Instruments' small sub-1 GHz radio, and the green 433 MHz board with the copper spring antenna is a favourite for wireless sensors and 433 MHz remote controls. With this CC1101 Library for Proteus , two modules in one design talk over a simulated 433 MHz air, and your Arduino drives them over SPI with the same SmartRC-CC1101 library you use on real hardware. Version 1.1 replaces the first version of this post. You now get two devices : CC1101 Simple , with its control panel on the schematic, and CC1101 Advance , with a pop-up window and five measured RF test tools . The new CC1101 Arduino Proteus demo has two Arduino UNOs that send packets, PING each other ...
