Tag: AT commands

8 articles found.

GSM Libraries for Proteus: SIM800C, SIM900A, SIM800L and SIM808

GSM Libraries for Proteus: SIM800C, SIM900A, SIM800L and SIM808 simulation with Arduino

Hello friends, I hope you all are doing great. Today, I am going to share a list of GSM Libraries for Proteus . A GSM module gives your Arduino its own phone number: it can send and receive SMS, ring when someone calls and tell your sketch who is calling. That's why GSM modules are used in so many engineering projects, like home security alarms, SMS-controlled relays, vehicle trackers and remote weather stations. The problem is that a real GSM module needs a SIM card, a 2G network and a power supply that can deliver 2 A peaks, and when your project doesn't work, you can't see what the module and the Arduino are saying to each other. Our GSM libraries solve this: they answer real AT commands, register on a simulated network, send SMS to a virtual smartphone and show every line of the conver ...

SIM800C Library for Proteus V1.1 (GSM Module + Arduino)

SIM800C Library for Proteus V1.1: two Arduino UNOs with HW-537 SIM800C boards, the SIM800C Advance pop-up with an SMS chat and the TEP Serial Monitor in its Simple interface

Hello friends, I hope you all are doing great. Today, I am going to share the new SIM800C GSM Library for Proteus V1.1 . The SIM800C is SIMCom's quad-band GSM module, and many makers buy it on the small blue HW-537 board with a flexible antenna. This board has one habit that confuses many beginners: it stays switched off until its PWX power key is held LOW for more than a second. With this SIM800C Library for Proteus , you can learn that habit, send SMS, make calls and debug your GSM sketch on your PC, before you buy a SIM card or a 2 A power supply. Version 1.1 gives you two devices : SIM800C Simple , with a virtual smartphone next to the module, and SIM800C Advance , with a pop-up window that holds the phone plus four measured GSM test tools . The Arduino SIM800C Proteus demo has two Ard ...

SIM900A Library for Proteus V1.1 (GSM Module + Arduino)

SIM900A Library for Proteus V1.1: two Arduino UNOs with SIM900A modules, the SIM900A Advance pop-up with an SMS chat and the TEP Serial Monitor in its Simple interface

Hello friends, I hope you all are doing great. Today, I am going to share the new SIM900A GSM Library for Proteus V1.1 . The SIM900A on its blue "SIM900A MINI" board is one of the cheapest ways to give an Arduino its own phone number: it sends and receives SMS and tells your sketch who is calling. It is also famous for a nasty surprise: in many countries, a brand-new SIM900A never connects to the network. With this SIM900A Library for Proteus , you can build your GSM project on your PC, see every line the module answers and even reproduce that region lock before you buy any hardware. You get two devices in one library: SIM900A Simple , with a virtual smartphone next to the module on the schematic, and SIM900A Advance , with a pop-up window that holds the phone and four measured GSM test to ...

ESP-01 Library for Proteus V1.1 (ESP8266 Wi-Fi + Arduino)

ESP-01 Library for Proteus V1.1: two Arduino UNOs, the ESP-01 Advance pop-up with the LED web page and the TEP Serial Monitor showing the web requests

Hello friends, I hope you all are doing great. Today, I am going to share the new ESP-01 Wi-Fi Library for Proteus V1.1 . The ESP-01 is the tiny black ESP8266 board that gives an Arduino Wi-Fi: with a handful of AT commands, your sketch can join a router, serve a web page to a phone, or upload sensor readings to the cloud. With this ESP-01 Library for Proteus , you can build and debug those IoT projects on your PC, without a 3.3 V supply, a router or an internet account. In this new version, you get two devices in one library: ESP-01 Simple , which draws a virtual smartphone on the schematic, and ESP-01 Advance , which opens a pop-up window with the phone and four real Wi-Fi test tools (Wi-Fi join, web request, cloud upload and AT check). I am also sharing a complete Arduino ESP8266 Proteu ...

SIM800L Library for Proteus V1.1 (GSM Module + Arduino)

SIM800L Library for Proteus V1.1: two Arduino UNOs, the SIM800L Advance pop-up with an SMS chat and the TEP Serial Monitor showing the SMS replies

Hello friends, I hope you all are doing great. Today, I am going to share the new SIM800L GSM Library for Proteus V1.1 . The SIM800L is the small GSM module that lets an Arduino send and receive SMS and make phone calls, so it is used in almost every "control it from my phone" project: home automation, alarms, trackers and remote switches. With this SIM800L Library for Proteus , you can build and test those projects on your PC, without a SIM card, a 2 A power supply or a 2G network. In this new version, you get two devices in one library: SIM800L Simple , which draws a virtual smartphone on the schematic, and SIM800L Advance , which opens a pop-up window with the phone and four real GSM test tools (network registration, SMS round trip, call test and AT check). I am also sharing a complete ...

HC-05 Library for Proteus V1.1 (HC-05 & HC-06 Bluetooth)

HC-05 Library for Proteus V1.1: HC-05 Advance master linked to an HC-06 Simple slave with two Arduino UNOs and TEP Serial Monitors

Hello friends, I hope you all are doing great. Today, I am going to share the new HC-05 & HC-06 Bluetooth Library for Proteus V1.1 . The HC-05 and HC-06 are two of the most popular Bluetooth modules among Arduino users. They work like a wireless serial cable between your Arduino and a smartphone (or another module), so students use them for phone-controlled LEDs, robots and home automation. With this HC-05 Library for Proteus , you can try all of that before you buy a single module. In this new version, you get four devices in one library: HC-05 Simple , HC-05 Advance , HC-06 Simple and HC-06 Advance . The Simple devices draw a virtual smartphone on the schematic; the Advance devices open a pop-up window with the phone and Bluetooth test tools. I am also sharing two complete Arduino HC-05 ...

HC-12 Library for Proteus V1.1 | 433 MHz Wireless Serial Module

HC-12 Library for Proteus V1.1 with HC-12 Simple, HC-12 Advance pop-up panel and two Arduino UNOs

Hello friends, I hope you all are doing great. Today, I am going to share the new HC-12 Library for Proteus V1.1 . The HC-12 is a small 433 MHz radio module that works like a wireless serial cable : whatever your Arduino prints into one HC-12 comes out of another HC-12, hundreds of metres away. It is cheap and simple, so students love it for remote controls, weather stations and wireless sensor projects. In this new version, you get two HC-12 devices in one library: HC-12 Simple with its control panel drawn right on the schematic, and HC-12 Advance with a modern pop-up panel full of test tools. I am also sharing a complete Arduino HC-12 Proteus simulation: two Arduino UNOs chatting over the air, each with our TEP Serial Monitor. NOTICE: We are really proud of this one. As far as we know, o ...

SIM808 Library for Proteus V1.1 (GSM + GPS + Arduino)

SIM808 Library for Proteus V1.1: two Arduino UNOs with SIM808 boards, the SIM808 Advance pop-up with a GPS 3D fix and Google Maps links, and the TEP Serial Monitor in its Simple interface

Hello friends, I hope you all are doing great. Today, I am going to share the new SIM808 Library for Proteus V1.1 . The SIM808 is SIMCom's popular module that puts a GSM / GPRS modem and a GPS receiver on one board, so a single Arduino serial port gives you SMS, calls and your position. That is why it is the favourite of GPS trackers, vehicle trackers and anti-theft projects. With this GSM GPS Library for Proteus , you can build and debug your tracker on your PC, before you buy a SIM card and a 2 A power supply, and before you walk outside for a satellite fix. Version 1.1 replaces the first version of this post. You now get two devices : SIM808 Simple , with the virtual phone and its GPS strip next to the module, and SIM808 Advance , with a pop-up window that holds the phone plus five meas ...