Hello friends, I hope you all are doing great. Today, I am going to share the LilyGO T-Beam Supreme Library for Proteus . The T-Beam Supreme is a long black board with an ESP32-S3 , an SX1262 LoRa radio, a GPS receiver and a bright 1.3 inch OLED , all on one board. It is the favourite of people who build off-grid mesh radios and trackers, because it can tell a friend where you are from kilometres away, with no phone network at all. With this library it runs your ESP32-S3 Arduino sketch in Proteus 8.5, with the radio, the GPS and the OLED working on the part. Updates T-Beam Supreme Library for Proteus Latest version: V1.0 (November 2026, this tutorial) Other ESP32 boards and modules: ESP32 DevKit V1 · ESP32-DevKitC V4 · ESP32-S3 DevKitC-1 · ESP32-C3 SuperMini · ESP32-C6 DevKitC-1 · TTGO T-D ...
Hello friends, I hope you all are doing great. Today, I am going to share the new SIM808 Library for Proteus V1.1 . The SIM808 is SIMCom's popular module that puts a GSM / GPRS modem and a GPS receiver on one board, so a single Arduino serial port gives you SMS, calls and your position. That is why it is the favourite of GPS trackers, vehicle trackers and anti-theft projects. With this GSM GPS Library for Proteus , you can build and debug your tracker on your PC, before you buy a SIM card and a 2 A power supply, and before you walk outside for a satellite fix. Updates SIM808 Library for Proteus Latest version: V1.1 (October 2026, this tutorial) Other GSM modules: SIM800L · SIM800C · SIM900A Other GPS modules: NEO-6M · NEO-7M · NEO-M8N Helping Tools Serial Monitor Advance : a serial termina ...