Hello friends, I hope you all are doing great. Today, I am going to share the new NEO-6M GPS Library for Proteus V1.1 . The u-blox NEO-6M is the GPS module most students start with: it is cheap, it talks to an Arduino over two wires, and it tells you where you are, how fast you move and the exact time. With this NEO-6M Library for Proteus , you can build and test your GPS project on your PC, without waiting next to a window for a satellite fix. In this new version, you get two devices in one library: NEO-6M Simple , which draws a GPS screen on the schematic, and NEO-6M Advance , which opens a pop-up window with the GPS screen and four real GPS test tools (time to first fix, accuracy, NMEA check and route). I am also sharing a complete Arduino GPS Proteus simulation: one UNO prints the raw ...
Hello friends, I hope you all are doing great. Today, I am going to share the new SIM808 Library for Proteus V1.1 . The SIM808 is SIMCom's popular module that puts a GSM / GPRS modem and a GPS receiver on one board, so a single Arduino serial port gives you SMS, calls and your position. That is why it is the favourite of GPS trackers, vehicle trackers and anti-theft projects. With this GSM GPS Library for Proteus , you can build and debug your tracker on your PC, before you buy a SIM card and a 2 A power supply, and before you walk outside for a satellite fix. Version 1.1 replaces the first version of this post. You now get two devices : SIM808 Simple , with the virtual phone and its GPS strip next to the module, and SIM808 Advance , with a pop-up window that holds the phone plus five meas ...
