Tag: SMS

3 articles found.

SIM800C Library for Proteus V1.1 (GSM Module + Arduino)

SIM800C Library for Proteus V1.1: two Arduino UNOs with HW-537 SIM800C boards, the SIM800C Advance pop-up with an SMS chat and the TEP Serial Monitor in its Simple interface

Hello friends, I hope you all are doing great. Today, I am going to share the new SIM800C GSM Library for Proteus V1.1 . The SIM800C is SIMCom's quad-band GSM module, and many makers buy it on the small blue HW-537 board with a flexible antenna. This board has one habit that confuses many beginners: it stays switched off until its PWX power key is held LOW for more than a second. With this SIM800C Library for Proteus , you can learn that habit, send SMS, make calls and debug your GSM sketch on your PC, before you buy a SIM card or a 2 A power supply. Version 1.1 gives you two devices : SIM800C Simple , with a virtual smartphone next to the module, and SIM800C Advance , with a pop-up window that holds the phone plus four measured GSM test tools . The Arduino SIM800C Proteus demo has two Ard ...

SIM900A Library for Proteus V1.1 (GSM Module + Arduino)

SIM900A Library for Proteus V1.1: two Arduino UNOs with SIM900A modules, the SIM900A Advance pop-up with an SMS chat and the TEP Serial Monitor in its Simple interface

Hello friends, I hope you all are doing great. Today, I am going to share the new SIM900A GSM Library for Proteus V1.1 . The SIM900A on its blue "SIM900A MINI" board is one of the cheapest ways to give an Arduino its own phone number: it sends and receives SMS and tells your sketch who is calling. It is also famous for a nasty surprise: in many countries, a brand-new SIM900A never connects to the network. With this SIM900A Library for Proteus , you can build your GSM project on your PC, see every line the module answers and even reproduce that region lock before you buy any hardware. You get two devices in one library: SIM900A Simple , with a virtual smartphone next to the module on the schematic, and SIM900A Advance , with a pop-up window that holds the phone and four measured GSM test to ...

SIM800L Library for Proteus V1.1 (GSM Module + Arduino)

SIM800L Library for Proteus V1.1: two Arduino UNOs, the SIM800L Advance pop-up with an SMS chat and the TEP Serial Monitor showing the SMS replies

Hello friends, I hope you all are doing great. Today, I am going to share the new SIM800L GSM Library for Proteus V1.1 . The SIM800L is the small GSM module that lets an Arduino send and receive SMS and make phone calls, so it is used in almost every "control it from my phone" project: home automation, alarms, trackers and remote switches. With this SIM800L Library for Proteus , you can build and test those projects on your PC, without a SIM card, a 2 A power supply or a 2G network. In this new version, you get two devices in one library: SIM800L Simple , which draws a virtual smartphone on the schematic, and SIM800L Advance , which opens a pop-up window with the phone and four real GSM test tools (network registration, SMS round trip, call test and AT check). I am also sharing a complete ...