Hello friends, I hope you are doing well. In today's tutorial, I am going to share our nRF24L01 Proteus Library . With this library, we can place two nRF24L01 RF modules in one Proteus design, connect each module to an Arduino Uno and send messages from one board to the other. The transmitter reports whether every message was acknowledged, and the receiver prints each message on its own Virtual Terminal. We will start with the basics of the module, download and install the library files, and wire the SPI pins. After that, we will run the supplied two-Arduino simulation, test a broken link with the range switch, and understand both Arduino sketches. The download includes the wired project, two compiled HEX files, both sketches and the Arduino radio driver, so you can run the first experimen ...