Hello friends, I hope you all are doing great. Today, I am going to share the new Flame Sensor Library for Proteus V2.0 . The flame sensor is the small blue module with a black infrared receiver on long legs: it sees the infrared light of a flame and tells your Arduino about it through an analog output (A0) and a digital output (D0). With this Flame Sensor Library for Proteus , you light a candle, a lighter or a gas burner in the simulation, move it closer or turn the sensor away, switch on the sun, and your Arduino reads the module just as it reads a real one, with analogRead() and digitalRead() . We shared earlier versions of a flame sensor library for Proteus before. Version 2.0 is a completely new model with its own files: the sensor is now a real analog part in the SPICE simulator of ...
Hello friends, I hope you all are doing great. Today, I am going to share the new Soil Moisture Sensor Library for Proteus V3.0 . The soil moisture sensor is one of the first sensors students use in a garden or agriculture project: a YL-69 fork probe that you push into the soil, and the blue FC-28 board with an LM393 comparator that gives an analog output (A0) and a digital output (D0). With this Soil Moisture Sensor Library for Proteus , you set the soil with a click, water the plant, let the sun dry it, and your Arduino reads A0 with analogRead() and D0 with digitalRead(), just like on a real board. Version 3.0 is the next version of our soil moisture library for Proteus, and it is built around an analog model : the board is made of real resistances inside Proteus's SPICE simulator, so A ...
Hello friends, I hope you all are doing great. Today, I am going to share the new PIR Sensor Library for Proteus V4.0 . The HC-SR501 is a very popular PIR motion sensor module: a green board with a white dome that switches its OUT pin HIGH when a person or an animal moves in front of it. You find it in motion-activated lights, alarms and automatic doors. With this PIR Sensor Library for Proteus , a person or a cat walks through a room on your schematic, and your Arduino reads the OUT pin exactly as it reads a real HC-SR501. Version 4.0 is the next version of our PIR sensor library. You get two devices : HC-SR501 Simple , with a room scene on the schematic, and HC-SR501 Advance , with a pop-up window and four measured sensor test tools . The model has the time delay, the H / L jumper, the b ...
Hello friends, I hope you all are doing great. Today, I am going to share the new Ultrasonic Sensor Library for Proteus V2.0 . The HC-SR04 is the blue ultrasonic distance sensor with two silver "eyes" that you find in almost every Arduino kit. With this Ultrasonic Sensor Library for Proteus , you place an object in front of the sensor (a wall, a hand, a soft cushion or a tilted board), move it or change the air temperature, and your Arduino measures the distance with the same TRIG and ECHO pulses it uses on real hardware. Version 2.0 is the next version of our ultrasonic sensor library, a new model with the real timing of the module. You get two devices : HC-SR04 Simple , with a control panel on the schematic, and HC-SR04 Advance , with a pop-up window and four measured sonar test tools . ...
Hello friends, I hope you all are doing great. Today, I am going to share the new SIM800C GSM Library for Proteus V1.1 . The SIM800C is SIMCom's quad-band GSM module, and many makers buy it on the small blue HW-537 board with a flexible antenna. This board has one habit that confuses many beginners: it stays switched off until its PWX power key is held LOW for more than a second. With this SIM800C Library for Proteus , you can learn that habit, send SMS, make calls and debug your GSM sketch on your PC, before you buy a SIM card or a 2 A power supply. Version 1.1 gives you two devices : SIM800C Simple , with a virtual smartphone next to the module, and SIM800C Advance , with a pop-up window that holds the phone plus four measured GSM test tools . The Arduino SIM800C Proteus demo has two Ard ...
Hello friends, I hope you all are doing great. Today, I am going to share the new SIM900A GSM Library for Proteus V1.1 . The SIM900A on its blue "SIM900A MINI" board is one of the cheapest ways to give an Arduino its own phone number: it sends and receives SMS and tells your sketch who is calling. It is also famous for a nasty surprise: in many countries, a brand-new SIM900A never connects to the network. With this SIM900A Library for Proteus , you can build your GSM project on your PC, see every line the module answers and even reproduce that region lock before you buy any hardware. You get two devices in one library: SIM900A Simple , with a virtual smartphone next to the module on the schematic, and SIM900A Advance , with a pop-up window that holds the phone and four measured GSM test to ...
Hello friends, I hope you all are doing great. Today, I am going to share the new ESP-01 Wi-Fi Library for Proteus V1.1 . The ESP-01 is the tiny black ESP8266 board that gives an Arduino Wi-Fi: with a handful of AT commands, your sketch can join a router, serve a web page to a phone, or upload sensor readings to the cloud. With this ESP-01 Library for Proteus , you can build and debug those IoT projects on your PC, without a 3.3 V supply, a router or an internet account. In this new version, you get two devices in one library: ESP-01 Simple , which draws a virtual smartphone on the schematic, and ESP-01 Advance , which opens a pop-up window with the phone and four real Wi-Fi test tools (Wi-Fi join, web request, cloud upload and AT check). I am also sharing a complete Arduino ESP8266 Proteu ...
Hello friends, I hope you all are doing great. Today, I am going to share the new NEO-M8N GNSS Library for Proteus V1.1 . The u-blox NEO-M8N is the GPS module of choice for drones, robots and trackers, because it listens to GPS and GLONASS at the same time . More satellites mean a faster, steadier and more accurate position, especially between buildings. With this NEO-M8N Library for Proteus , you can test your GNSS sketches on your PC and actually measure how much the second satellite system helps. In this version, you get two devices : NEO-M8N Simple , with a GNSS screen drawn on the schematic, and NEO-M8N Advance , with a pop-up window that holds the screen and five measured GNSS test tools . The star of this article is the Constellations test, which runs GPS only, GLONASS only and GPS ...
Hello friends, I hope you all are doing great. Today, I am going to share the new NEO-7M GPS Library for Proteus V1.1 . The u-blox NEO-7M is the next step after the famous NEO-6M: it is the same size and talks to your Arduino the same way, but it can also use the Russian GLONASS satellites instead of GPS. With this NEO-7M Library for Proteus , you can test your GPS sketches on your PC, switch between GPS and GLONASS with one click, and see for yourself which system works better where your project will live. In this version, you get two devices : NEO-7M Simple , with a GPS screen drawn on the schematic, and NEO-7M Advance , with a pop-up window that holds the GPS screen and five measured GNSS test tools : time to first fix, accuracy, NMEA check, route and a new Constellations test that puts ...
Hello friends, I hope you all are doing great. Today, I am going to share the new SIM800L GSM Library for Proteus V1.1 . The SIM800L is the small GSM module that lets an Arduino send and receive SMS and make phone calls, so it is used in almost every "control it from my phone" project: home automation, alarms, trackers and remote switches. With this SIM800L Library for Proteus , you can build and test those projects on your PC, without a SIM card, a 2 A power supply or a 2G network. In this new version, you get two devices in one library: SIM800L Simple , which draws a virtual smartphone on the schematic, and SIM800L Advance , which opens a pop-up window with the phone and four real GSM test tools (network registration, SMS round trip, call test and AT check). I am also sharing a complete ...
