Hello friends, I hope you all are doing great. Today, I am going to share the new OLED 128x32 Library for Proteus V1.0 . The 0.91" OLED is the little brother of the popular 0.96" display: a long, thin module of 128 x 32 pixels, with the same SSD1306 controller and the same four I2C wires, GND, VCC, SCL and SDA. It fits where a bigger display does not: in a small box, under a knob, on a badge, or as a status line next to a project. With this OLED 128x32 Library for Proteus , your sketch draws on a 0.91" OLED that behaves like the real one, pixel by pixel. This is our second OLED library, after the OLED SSD1306 Library for Proteus V1.0 , and it runs on the same own SSD1306 model , now with the 32-row glass wired the way the real 0.91" module is. You get four devices : a white and a blue OLED ...
Hello friends, I hope you all are doing great. Today, I am going to share the new OLED SSD1306 Library for Proteus V1.0 . The small 0.96" OLED display is everywhere in Arduino projects: 128 x 64 sharp, bright pixels, no backlight, and only four wires, GND, VCC, SCL and SDA. It shows text, numbers, graphs, icons and little animations, so it is the display to pick when a character LCD is not enough. With this OLED SSD1306 Library for Proteus , your sketch draws on an OLED that behaves like the real module, pixel by pixel. This is our first OLED library, and it is our own model of the SSD1306 controller: its I2C interface, its 1 KB display memory, its commands, its charge pump and its scrolling. You get six devices : a white, a blue and a yellow-blue OLED, each as OLED SSD1306 Simple , with a ...
