Hello friends, I hope you all are doing great. Today, I am going to share the new Nokia 5110 LCD Library for Proteus V1.0 . The Nokia 5110 LCD is the little graphic screen of the old Nokia phones: 84 x 48 pixels, a backlight, and a price that made it a favourite of Arduino beginners for years. It is still one of the cheapest ways to put text, numbers and small pictures on a project. With this Nokia 5110 LCD Library for Proteus , your sketch draws on a Nokia 5110 that behaves like the real one, including its famous contrast trouble. This is our own model of the module, with the PCD8544 controller written from its datasheet: the SPI interface bit by bit, both instruction sets, the contrast voltage and the backlight. You get four devices : a blue and a white backlight, each as Nokia 5110 Simp ...
Hello friends, I hope you all are doing great. Today, I am going to share the new OLED SH1106 Library for Proteus V1.0 . The 1.3" OLED is the big brother of the popular 0.96" display: the same 128 x 64 pixels on a bigger glass, easier to read from a distance, on a board with the same four I2C pins. But inside it hides a different controller, the SH1106 , and that catches almost everybody once: an SSD1306 sketch shows only random dots on it. With this OLED SH1106 Library for Proteus , your sketch draws on a 1.3" OLED that behaves like the real one, including that trap. This is our third OLED library, after the OLED SSD1306 Library for Proteus V1.0 and the OLED 128x32 Library for Proteus V1.0 , and it runs on the same own OLED model , now with an SH1106 controller written from its datasheet: ...
Hello friends, I hope you all are doing great. Today, I am going to share the new OLED 128x32 Library for Proteus V1.0 . The 0.91" OLED is the little brother of the popular 0.96" display: a long, thin module of 128 x 32 pixels, with the same SSD1306 controller and the same four I2C wires, GND, VCC, SCL and SDA. It fits where a bigger display does not: in a small box, under a knob, on a badge, or as a status line next to a project. With this OLED 128x32 Library for Proteus , your sketch draws on a 0.91" OLED that behaves like the real one, pixel by pixel. This is our second OLED library, after the OLED SSD1306 Library for Proteus V1.0 , and it runs on the same own SSD1306 model , now with the 32-row glass wired the way the real 0.91" module is. You get four devices : a white and a blue OLED ...
Hello friends, I hope you all are doing great. Today, I am going to share the new OLED SSD1306 Library for Proteus V1.0 . The small 0.96" OLED display is everywhere in Arduino projects: 128 x 64 sharp, bright pixels, no backlight, and only four wires, GND, VCC, SCL and SDA. It shows text, numbers, graphs, icons and little animations, so it is the display to pick when a character LCD is not enough. With this OLED SSD1306 Library for Proteus , your sketch draws on an OLED that behaves like the real module, pixel by pixel. This is our first OLED library, and it is our own model of the SSD1306 controller: its I2C interface, its 1 KB display memory, its commands, its charge pump and its scrolling. You get six devices : a white, a blue and a yellow-blue OLED, each as OLED SSD1306 Simple , with a ...
