Hello friends, I hope you all are doing great. Today, I am going to share the new OLED SH1106 Library for Proteus V1.0 . The 1.3" OLED is the big brother of the popular 0.96" display: the same 128 x 64 pixels on a bigger glass, easier to read from a distance, on a board with the same four I2C pins. But inside it hides a different controller, the SH1106 , and that catches almost everybody once: an SSD1306 sketch shows only random dots on it. With this OLED SH1106 Library for Proteus , your sketch draws on a 1.3" OLED that behaves like the real one, including that trap. This is our third OLED library, after the OLED SSD1306 Library for Proteus V1.0 and the OLED 128x32 Library for Proteus V1.0 , and it runs on the same own OLED model , now with an SH1106 controller written from its datasheet: ...
Hello friends, I hope you all are doing great. Today, I am going to share the new OLED 128x32 Library for Proteus V1.0 . The 0.91" OLED is the little brother of the popular 0.96" display: a long, thin module of 128 x 32 pixels, with the same SSD1306 controller and the same four I2C wires, GND, VCC, SCL and SDA. It fits where a bigger display does not: in a small box, under a knob, on a badge, or as a status line next to a project. With this OLED 128x32 Library for Proteus , your sketch draws on a 0.91" OLED that behaves like the real one, pixel by pixel. This is our second OLED library, after the OLED SSD1306 Library for Proteus V1.0 , and it runs on the same own SSD1306 model , now with the 32-row glass wired the way the real 0.91" module is. You get four devices : a white and a blue OLED ...
Hello friends, I hope you all are doing great. Today, I am going to share the new OLED SSD1306 Library for Proteus V1.0 . The small 0.96" OLED display is everywhere in Arduino projects: 128 x 64 sharp, bright pixels, no backlight, and only four wires, GND, VCC, SCL and SDA. It shows text, numbers, graphs, icons and little animations, so it is the display to pick when a character LCD is not enough. With this OLED SSD1306 Library for Proteus , your sketch draws on an OLED that behaves like the real module, pixel by pixel. This is our first OLED library, and it is our own model of the SSD1306 controller: its I2C interface, its 1 KB display memory, its commands, its charge pump and its scrolling. You get six devices : a white, a blue and a yellow-blue OLED, each as OLED SSD1306 Simple , with a ...
Hello friends, I hope you all are doing great. Today, I am going to share the new I2C LCD 20x4 Library for Proteus V1.0 . The I2C LCD 20x4 is the big brother of the 16x2: four rows of 20 characters, 80 characters in all, on a 98 x 60 mm board, with the same small black I2C backpack on its back. It still needs only four wires, GND, VCC, SDA and SCL, so it is the LCD to pick when a 16x2 is too small for your menu, your sensor readings or your status screen. With this I2C LCD 20x4 Library for Proteus , your sketch talks to an LCD that behaves like the real module, including the strange row order of every 20x4. This is the third library of our LCD series, after the LCD 16x2 Library for Proteus V3.0 and the I2C LCD 16x2 Library for Proteus V1.0 , and it is our own model of the whole module: the ...
Hello friends, I hope you all are doing great. Today, I am going to share the new I2C LCD 16x2 Library for Proteus V1.0 . The I2C LCD 16x2 is the same blue or yellow-green 1602 character LCD you know, with a small black I2C backpack soldered to its back. Instead of six or more wires, it needs only four: GND, VCC, SDA and SCL. That is why it is the LCD most of us use with an Arduino today. With this I2C LCD 16x2 Library for Proteus , your sketch talks to an LCD that behaves like the real module: the I2C address, the contrast trimmer on the backpack, the backlight jumper, and the real HD44780 behind it. This is the second library of our LCD series, after the LCD 16x2 Library for Proteus V3.0 , and it is our own model of the whole module: the PCF8574 I2C port expander of the backpack and the ...
