
Hello friends, I hope you all are doing great. Today, I am going to share the Raspberry Pi 5 Tilt Alarm with MPU9250 and ST7735 (Proteus Simulation) , the forty-sixth project of our IoT Projects series. If you have searched for a Proteus simulation of an MPU9250 with a Raspberry Pi, a digital spirit level on a TFT, or a tilt sensor that warns before a machine tips over, here is a complete one. A Raspberry Pi 5 reads the accelerometer and the gyroscope of an MPU-9250, blends them into a steady pitch and roll, draws a bubble level on a 1.8" ST7735 TFT, buzzes a coin vibration motor through a DRV8833 when the tilt goes too far, and serves a live web dashboard on a laptop or a phone. Tilt alarms are fitted wherever tipping over is the worst thing that can happen: on cranes and aerial work plat ...









