Hello friends, I hope you all are doing great. Today, I am going to share the new MPU9250 Library for Proteus V1.0 . The MPU-9250 is the 9-axis motion sensor on the purple GY-9250 module: a 3-axis accelerometer, a 3-axis gyroscope and a 3-axis magnetometer in one small package. Drones, self-balancing robots, gimbals and head trackers use it to know their roll , pitch and yaw . Now you can build and test those projects in Proteus. Behind the part sits our own model , not a part that shows three angles. The MPU-9250 answers the Arduino exactly as its register map says: the sample rate, the ranges, the offset registers, the FIFO and the INT pin, and the AK8963 magnetometer hidden behind the I2C bypass. You turn the board in 15 degree steps, rotate it, wave it in a figure eight or put a magnet ...
Hello friends, I hope you all are doing great. Today, I am going to share the new HMC5883L / QMC5883L Compass Library for Proteus V1.0 . The GY-271 is the small blue compass module that you find in robots, rovers, drones and digital compass projects. It measures the Earth's magnetic field on three axes, and from two of them the Arduino works out the heading : how many degrees the board points away from north. There is a catch: GY-271 boards come with two different chips, the HMC5883L and the QMC5883L , and a sketch written for one does not work on the other. Now you can build and test both in Proteus. Behind the parts sit our own models , not parts that show a number. Each chip answers the Arduino exactly as its datasheet says, with its own address, its own registers and its own byte order ...
