TEP DOWNLOAD CENTER

Project Files of DC Motor Speed Control using Arduino

Libraries Code Projects Simulation

tep://download-terminal DC_Motor_Speed_Control_using_Arduino_UNO.rar RAR archiveVerified10,737 downloadsFree

DC motor speed control using Arduino, Control speed of the DC motor with arduino, How to control the speed of the DC motor, using Arduino, Arduino DC motor speed control, Controlling the speed of the DC motor with Arduino

Arduino sketch · File 1 of 1

Download Arduino Source Code

Download Arduino Source Code comes as a RAR archive of 1 file (1.2 KB, 2.9 KB unpacked) holding an Arduino sketch.

INOArduino sketch

Description

Looking for the files of DC Motor Speed Control using Arduino? Arduino Source Code is the RAR package (1.2 KB) you need. It holds an Arduino sketch. Below are the file structure, the README and the installation steps, so you can go from download to a running sketch in a few minutes.

What this package is

Arduino Source Code contains the Arduino code of DC Motor Speed Control using Arduino: DC_Motor_Speed_Control_using_Arduino_UNO.ino. Open it in the Arduino IDE, choose your board and port, and upload; the tutorial walks through every line, so you know what to change for your own wiring.

The tutorial opens with: “Hello friends! I hope you all will be absolutely fine and having fun.” That article is the detailed guide; the sections below cover the files.

What is inside the RAR file

DC_Motor_Speed_Control_using_Arduino_UNO.ino – Arduino sketch, 2.9 KB

The archive unpacks to 2.9 KB; there is no README inside, so the steps below stand in for it.

How to download

Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and DC_Motor_Speed_Control_using_Arduino_UNO.rar comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.

How to install

Step 1: Extract DC_Motor_Speed_Control_using_Arduino_UNO.rar with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
Step 2: Open DC_Motor_Speed_Control_using_Arduino_UNO.ino in the Arduino IDE, pick board and port and Verify (Export Compiled Binary gives the HEX).

Read the detailed guide

This page is for the files. The full tutorial, DC Motor Speed Control using Arduino, explains the circuit and the code step by step and shows the working results; read it before you build. Questions about the download or the installation go in the comments below; more Arduino downloads are listed further down this page.

The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.

Read DC Motor Speed Control using Arduino

File Structure

DC_Motor_Speed_Control_using_Arduino_UNO.rar1 files · 1 folders · 2.9 KB unpacked

DC_Motor_Speed_Control_using_Arduino_UNO/1 file · 2.9 KB

INO DC_Motor_Speed_Control_using_Arduino_UNO.inoArduino sketch 2.9 KB

Gallery7 images from the tutorialOpen the tutorial

The circuit, the board and the results as they appear in DC Motor Speed Control using Arduino. Open an image for its full size.

DC motor speed control using Arduino UNO, Control speed of the DC motor with arduino, How to control the speed of the DC motor, using Arduino, Arduino DC motor speed control, Controlling the speed of the DC motor with Arduino

README

README no readme

This package has no README file. The Install tab explains where each file goes, and the tutorial DC Motor Speed Control using Arduino walks through the whole project.

Development1 release

10 Apr 2017
Download Arduino Source Codethis page

The only release of this package so far. When a newer version is published, it appears above with its own download page.

Installation3 steps

From the download to a working project, in order. The steps follow what the package contains.

You will need

Arduino IDE1.8 or 2.x, with the board of the tutorial chosen under Tools → Board
WinRAR or 7-ZipWindows cannot open RAR archives on its own

Steps

1
Extract the archive
Right-click DC_Motor_Speed_Control_using_Arduino_UNO.rar and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (DC_Motor_Speed_Control_using_Arduino_UNO) as it is.
2
Open the sketch in the Arduino IDE
Open DC_Motor_Speed_Control_using_Arduino_UNO.ino, select your board and port under Tools, then Verify. Sketch → Export Compiled Binary writes the HEX file a simulation needs.
3
Follow the tutorial
DC Motor Speed Control using Arduino explains every connection and setting in order; keep it open beside the files while you build.

How to add a library in Proteus 8

FAQs7 questionsContact TEP

How do I download Download Arduino Source Code?

Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.

What is inside the archive?

Download Arduino Source Code comes as a RAR archive of 1 file (1.2 KB, 2.9 KB unpacked) holding an Arduino sketch. Open the File Structure tab for the full list of 1 files.

What should I do if the download does not start?

Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.

Is this file free?

Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.

How do I check that the file arrived complete?

Compare its SHA-256 with the one on this page, 7c47dad0ca0ce242bde97d7d14a9f221ecbc378f9904f10fe89254c47cfb5ad2. In PowerShell run Get-FileHash "DC_Motor_Speed_Control_using_Arduino_UNO.rar"; on macOS or Linux run shasum -a 256 "DC_Motor_Speed_Control_using_Arduino_UNO.rar". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.

Do I need WinRAR to open the RAR file?

RAR archives need WinRAR, 7-Zip or another RAR-capable tool; Windows cannot open them on its own. Extract the whole archive before using the files.

How do I get the HEX file into the simulation?

Compile the sketch in the Arduino IDE (Sketch → Export Compiled Binary gives you the HEX next to the sketch), then in Proteus double-click the board, set Program File to that HEX and run.

preparing · DC_Motor_Speed_Control_using_Arduino_UNO.rar

Rating

Your download will be ready shortly

Preparing your download…

Members skip the wait. Log in or join TEP.