TEP DOWNLOAD CENTER

Project Files of Serial Communication with 8051 Microcontroller in Proteus

Libraries Code Projects Simulation

tep://download-terminal Serial Communication with 8051 Microcontroller in Proteus.rar RAR archiveVerified1 downloadsFree

Eight LEDs controlled through the AT89C52 serial interface, AT89C52 UART, serial LED control, Proteus Virtual Terminal

Proteus simulation · File 1 of 1

Download Proteus Simulation and Code

Download Proteus Simulation and Code comes as a RAR archive of 13 files (25.6 KB, 110.9 KB unpacked) holding a Proteus simulation, compiled HEX firmware and source code.

DSNProteus simulation
HEXHEX firmware
SRCSource code

Description

Looking for the files of Serial Communication with 8051 Microcontroller in Proteus? Proteus Simulation and Code is the RAR package (25.6 KB) you need. It holds a ready Proteus simulation, the compiled HEX firmware and the source code. Below are the file structure, the README and the installation steps, so you can go from download to a working Proteus simulation in a few minutes.

What this package is

Proteus Simulation and Code is the firmware package of Serial Communication with 8051 Microcontroller in Proteus: the source files (code.c) and the compiled HEX (cos.hex), together with the Proteus project Serial Communication with 8051 Microcontroller in Proteus.DSN that runs it. Build the source with the compiler the tutorial names, or load the HEX straight away to see the project work.

What is inside the RAR file

Serial Communication with 8051 Microcontroller in Proteus.DSN – Proteus simulation, 83.6 KB
cos.hex – Compiled HEX file, 814 B
code.c – Source file, 2.8 KB
code.LST – LST file, 5 KB
code.OBJ – OBJ file, 2.5 KB
cos – File, 2 KB
and 7 more, all listed in the File Structure tab

The archive unpacks to 110.9 KB; there is no README inside, so the steps below stand in for it.

How to download

Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and Serial Communication with 8051 Microcontroller in Proteus.rar comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.

How to install

Step 1: Extract Serial Communication with 8051 Microcontroller in Proteus.rar with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
Step 2: Build code.c with the compiler the tutorial names.
Step 3: In Proteus set the controller's Program File to cos.hex; on hardware, flash the same file.
Step 4: Open Serial Communication with 8051 Microcontroller in Proteus.DSN in Proteus and press Play.

Read the detailed guide

This page is for the files. The full tutorial, Serial Communication with 8051 Microcontroller in Proteus, explains the circuit and the code step by step and shows the working results and the simulation; read it before you build. Questions about the download or the installation go in the comments below; more 8051 Microcontroller Projects downloads are listed further down this page.

The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.

Read Serial Communication with 8051 Microcontroller in Proteus

File Structure

Serial Communication with 8051 Microcontroller in Proteus.rar13 files · 2 folders · 110.9 KB unpacked

Serial Communication with 8051 Microcontroller in Proteus/13 files · 110.9 KB

8051 Serial Code/11 files · 26.6 KB

SRC code.cSource file 2.8 KB

LST code.LSTLST file 5 KB

OBJ code.OBJOBJ file 2.5 KB

FILE cosFile 2 KB

HEX cos.hexCompiled HEX file 814 B

LNP cos.lnpLNP file 39 B

M51 cos.M51M51 file 8.3 KB

OPT cos.OptOPT file 955 B

UV2 cos.Uv2UV2 file 1.6 KB

BAK cos_Opt.BakBAK file 955 B

BAK cos_Uv2.BakBAK file 1.6 KB

HEX cos.hexCompiled HEX file 814 B

DSN Serial Communication with 8051 Microcontroller in Proteus.DSNProteus simulation 83.6 KB

Gallery6 images from the tutorialOpen the tutorial

The circuit, the board and the results as they appear in Serial Communication with 8051 Microcontroller in Proteus. Open an image for its full size.

Components for the 8051 UART demonstration, AT89C52 UART, serial LED control, Proteus Virtual Terminal — Components for the 8051 UART demonstration.

Original UART circuit showing the clock value that needs updating, AT89C52 UART, serial LED control, Proteus Virtual Terminal — Original UART circuit showing the clock value that needs updating.

Original serial simulation with LEDs initially off, AT89C52 UART, serial LED control, Proteus Virtual Terminal — Original serial simulation with LEDs initially off.

First LED activated by a serial character command, AT89C52 UART, serial LED control, Proteus Virtual Terminal — First LED activated by a serial character command.

Eight LED outputs activated with returned acknowledgements, AT89C52 UART, serial LED control, Proteus Virtual Terminal — Eight LED outputs activated with returned acknowledgements.

README

README no readme

This package has no README file. The Install tab explains where each file goes, and the tutorial Serial Communication with 8051 Microcontroller in Proteus walks through the whole project.

Development1 release

7 Dec 2015
Download Proteus Simulation and Codethis page

The only release of this package so far. When a newer version is published, it appears above with its own download page.

Installation5 steps

From the download to a working project, in order. The steps follow what the package contains.

You will need

Proteus Design SuiteProteus 7 or 8 (Labcenter), on Windows
The compiler named in the tutorialto build the source files into firmware
WinRAR or 7-ZipWindows cannot open RAR archives on its own

Steps

1
Extract the archive
Right-click Serial Communication with 8051 Microcontroller in Proteus.rar and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (Serial Communication with 8051 Microcontroller in Proteus) as it is.
2
Build the source code
Open code.c in the compiler named in the tutorial (MikroC, Keil, MPLAB, Code Composer or the Arduino IDE) and build it to get the firmware.
3
Load the HEX file
In Proteus double-click the microcontroller, set Program File to cos.hex and run the simulation. For real hardware, flash the same file with your programmer.
4
Open the example simulation
Open Serial Communication with 8051 Microcontroller in Proteus.DSN in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
5
Follow the tutorial
Serial Communication with 8051 Microcontroller in Proteus explains every connection and setting in order; keep it open beside the files while you build.

How to add a library in Proteus 8

FAQs7 questionsContact TEP

How do I download Download Proteus Simulation and Code?

Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.

What is inside the archive?

Download Proteus Simulation and Code comes as a RAR archive of 13 files (25.6 KB, 110.9 KB unpacked) holding a Proteus simulation, compiled HEX firmware and source code. Open the File Structure tab for the full list of 13 files.

What should I do if the download does not start?

Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.

Is this file free?

Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.

How do I check that the file arrived complete?

Compare its SHA-256 with the one on this page, 212e254e0fb60b8b9b764ca666c1e1853771987bc36ab2d7805da676b355f1a0. In PowerShell run Get-FileHash "Serial Communication with 8051 Microcontroller in Proteus.rar"; on macOS or Linux run shasum -a 256 "Serial Communication with 8051 Microcontroller in Proteus.rar". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.

Do I need WinRAR to open the RAR file?

RAR archives need WinRAR, 7-Zip or another RAR-capable tool; Windows cannot open them on its own. Extract the whole archive before using the files.

How do I get the HEX file into the simulation?

Compile the sketch in the Arduino IDE (Sketch → Export Compiled Binary gives you the HEX next to the sketch), then in Proteus double-click the board, set Program File to that HEX and run.

preparing · Serial Communication with 8051 Microcontroller in Proteus.rar

Rating

Your download will be ready shortly

Preparing your download…

Members skip the wait. Log in or join TEP.