Hello friends, I hope you all are doing great. Today, I am going to share the new BH1750 Light Sensor Library for Proteus V1.1 . The BH1750 is ROHM's small digital light sensor, best known on the blue GY-302 module: it measures how much light falls on it and gives your Arduino the result in lux over I2C. With this BH1750 Light Sensor Library for Proteus , you set the light with a slider or a light scene, and your Arduino reads it with the same claws BH1750 library you use on real hardware. Version 1.1 replaces the first version of this post. You now get two devices : BH1750 Simple , with a light panel on the schematic, and BH1750 Advance , with a pop-up window and four measured light test tools . The model now takes the real measurement time and averages the light over every measurement, l ...
Hello friends, I hope you all are doing great. Today, I am going to share the new PN532 NFC Library for Proteus V1.1 . The PN532 is NXP's NFC controller for 13.56 MHz cards and tags, best known on the red Elechouse PN532 NFC RFID module V3 . With this PN532 NFC Library for Proteus , you place cards on the reader with a click, and your Arduino reads them over SPI or I2C with the same Adafruit PN532 library you use on real hardware. Version 1.1 replaces the first version of this post. You now get two devices : PN532 Simple , with a card panel on the schematic, and PN532 Advance , with a pop-up card wallet and four measured NFC test tools . The new PN532 Arduino Proteus demo is an access-control system on two Arduino UNOs, one reader on SPI and one on I2C, shown in the compact Simple interfac ...
