Hi Guys! Hope you’re well today. Happy to see you around. In this post today, I’ll detail how to prevent data loss risk in raid-based storage.
RAID (Redundant Array of Independent Disks) is a data storage virtualization technology used for data redundancy and performance improvement in an Operating System. It has redefined how storage systems store and retrieve data, and its architecture comprises multiple physical disk drive components distributed over one or more logical units.
Prevent Data Loss Risk In Raid-Based Storage
RAID levels vary from RAID 0 to RAID 51 (and beyond). Different levels have different types of redundancy offered; however, a compromise has to be made when it comes to fault tolerance and performance. Although different RAID ...
Hi Friends! Happy to see you here. I welcome you on board. In this post today, I’ll walk you through the Introduction to 1n5821.
The 1n5820 is a Schottky diode that carries high surge capability and low forward drop voltage. It helps in extremely fast switching and comes in the DO-201AD package. This diode is also known as a hot-carrier diode and is well-shielded against the overvoltage, keeping the device safe under desired ratings.
I suggest you read this post all the way through as I’ll discuss the complete Introduction to 1n5821 covering the datasheet, features, pinout, features, and applications.
Before further ado, let’s get started.
Introduction to 1N5821
The 1n5820 is a Schottky diode that is capable of extremely fast switching and i ...
Hello Everyone! Hope you’re well today. I welcome you on board. In this post today, I’ll walk you through the Introduction to Arduino USB Host Shields.
With Arduino USB host shield you can interface the USB device to your Arduino board. This USB host shield is based on MAX3421E which is mainly known as the USB host controller that contains the analog circuitry and digital logic required to apply the USB full speed peripheral to USB specifications rev. 2.0.
Moreover, this shield is compatible with TinkerKit which projects you can plug this TinkerKit module with the Arduino Boards.
Introduction to Arduino USB Host Shields
Arduino USB host shield is used to connect a USB device with the Arduino Board. Simply put, USB host shields provide the USB ...
Hi Folks! Hope you’re well today. Happy to see you around. Today, I’ll walk you through the Introduction to 74LS76.The 74LS76 comes with separate J, K, clock pulse, direct clear inputs, and direct set. These flip-flops are developed in such a way when the clock is set HIGH, data will be received enabling inputs.
I suggest you buckle up as I’ll detail the complete Introduction to 74LS76 covering datasheet, pinout, features, alternatives, and applications.
Introduction to 74LS76
The 74LS76 comes with separate J, K, clock pulse, direct clear inputs, and direct set. These flip-flops are developed in such a way when the clock is set HIGH, data will be received enabling inputs.
This IC contains two JK flip-flops and each flip-flop can be utilized individually for the required applica ...
Hi Guys! I welcome you on board. Glad to see you around. Thank you for clicking this read. In this post today, I’ll detail the Introduction to 1n5817.
The 1n5817 is a Schottky diode used in extremely fast switching applications and carries high forward surge capability and low forward drop voltage. It is available in the DO-201AD package and can do high-frequency operations.
Read this post till the end as I’ll discuss the complete introduction to 1n5817 covering the datasheet, pinout, features, and applications of this component.
Let’s get started.
Introduction to 1N5817
The 1n5817 is a Schottky diode, also known as a hot-carrier diode, used in extremely fast switching applications.
It comes in the DO-201AD package and contains low forward ...
Hi Folks! Hope you’re well today. Happy to see you around. In this post today, I’ll walk you through the Introduction to Arduino Pro Micro.
Arduino Pro Micro is an Arduino compatible microcontroller board that is based on ATmega32u4. It operates at a frequency of 16MHz and 5V. It comes with 4 analog pins, 12 digital I/O pins, and 5 PWM pins. Moreover, it also supports serial communication UART with pins Rx and Tx.
Arduino is an open-source platform provided by Arduino.cc that offers both hardware and software customization. Open-source means you can use, edit, or customize the board and software based on your requirements.
Arduino boards are introduced in 2005 in Italy with the aim to provide a single platform where non-tech persons can get a h ...
Hi Everyone! Hope you’re well today. I welcome you on board. In this post today, I’ll detail the Introduction to BSS138.The BSS138 is an N-Channel Logic Level Enhancement Mode Field Effect Transistor that is available in surface mount package SOT-23. It features a low input capacitance of around 40pF and a low on-state resistance of around 3.5. High switching speed and low threshold voltage make this device an ideal pick for level shifter circuit applications.
I suggest you read this post all the way through as I’ll walk you through the complete Introduction to BSS138 covering datasheet, pinout, features, and applications.
Let’s jump right in.
Introduction to BSS138
The BSS138 is an N-Channel MOSFET mainly used in low current and low voltage switching applications.
It contai ...
Hi Friends! Hope you’re well today. I welcome you on board. In this post today, I’ll walk you through the key benefits of data visualization.
Data visualization is something that used to be a competitive advantage, but now it is becoming a necessity to survive.
I have outlined some of the key benefits of data visualization and I will explain each point very briefly. If you take one thing away from this post it should be that data visualization is important and you should be implanting data visualization techniques into your business or organization.
Reducing Errors
Keeping track of your data will let you tell a story about your customers and your business. One negative part of the story is that data visualization will let you identify the prob ...
Hi Folks! I hope you’re well today. I welcome you on board. Happy to see you around. In this post today, I’ll walk you through the Introduction to LF353N.The LM393N is a wide bandwidth and high input impedance Dual Input JEFET op-amp that is widely used in high-speed integrators and low noise circuits. The low bias current and input noise make it a good pick for audio amplifier applications. It carries a high slew rate (13V/uS) and wide bandwidth around (4MHz).
I suggest you read this post all the way through, as I’ll detail the complete introduction to LF353N covering datasheet, pinout, features, and applications.
Let’s dive in.
Introduction to LF353N
Introduced by the Texas Instrument, the LM393N is a high input impedance dual op-amp where the input of this device is attached ...
Hi Friends! I welcome you on board. Happy to see you around. In this post, I’ll detail the Introduction to Tip42c.
Tip42c is a medium power transistor mainly used for amplification and switching purpose. It is made up of silicon material and falls under the category of PNP transistors. The voltage across collector and emitter terminals is 100V and the voltage across base and collector terminals is 100V. The 5V is the voltage across base and emitter terminals which projects the value of voltage required to bias this transistor. The 6A is collector current which indicates the value of loads this transistor can support.
Just bear with me for a little while as I’ll be documenting the main features, pinout, applications, and datasheet of this tiny co ...
