Hello friends, I hope you all are doing great. Today, I am going to share our new Arduino Mini Library for Proteus V4.0 . The Arduino Mini is one of the smallest classic Arduino boards: the same ATmega328P at 16 MHz as the Arduino UNO, on a tiny teal board of only 30 x 18 mm, with no USB port. With this library, you place Arduino's Mini 05 in Proteus, load your sketch's HEX file and watch the board behave like the real one: its pin-13 LED follows your code, its reset button restarts the sketch through the bootloader, and its +5V pin powers the other parts of your circuit. V4.0 is the next version of our Arduino libraries for Proteus. The Mini is one of six boards in it; this post is all about the Mini, and our Arduino Library for Proteus V4.0 post shows all six boards side by side. The Min ...
Hello friends, I hope you all are doing great. Today, I am going to share the new Arduino Nano Library for Proteus V4.0 . The Arduino Nano is the small, breadboard-friendly Arduino: the same ATmega328P microcontroller as the Arduino UNO on a board of only about 18 x 45 mm, with a mini-USB socket and two rows of pins. With this Arduino Nano Library for Proteus V4.0 , the Nano in your Proteus simulation looks like the real blue board and behaves like one: its ON, L, TX and RX LEDs work , the RESET button works with the bootloader, the 5V and 3V3 pins really supply power, and a serial monitor is built into the board , so you do not need to wire a Virtual Terminal any more. This is the next version of our Arduino libraries for Proteus: we shared V1.0 back in 2015, then V2.0 and V3.0 (2023), an ...
