Hello friends, hope you all are fine and having good health. In today's post, I am going to share an Ultrasonic Sensor Library for Proteus. A few days ago, I posted a tutorial on Arduino Library for Proteus, and today I am going to share the new Ultrasonic Sensor Library for Proteus . Using this library, you can easily interface Ultrasonic Sensors with different Microcontrollers like Arduino, PIC Microcontroller etc. First of all, let's have a brief introduction to ultrasonic sensor. In an ultrasonic sensor, there are two nodes available, one is the transmitter while the other is the receiver. The transmitter sends an ultrasonic wave and this wave strikes any hindrance present in front of it and then bounces back. This bounced ultrasonic sensor is then captured by the receiver and on the b ...
Yesterday, I have posted a new Arduino Lilypad / Nano Library for Proteus in which we have seen how to add that library into Proteus so that you could be able to use these boards in Proteus. That was quite easy. Today I am gonna post a small project in which we will see how to use that library and produce an Arduino Lilypad simulation in Proteus. In this Arduino Lilypad simulation in Proteus, I am gonna use obviously he Arduino Lilypad board along with few LED lightsand will make them blink. Its also quite easy and you can also download the simulation and the hex file at the end of this project but I would suggest you to do it yourself so that you learn something out of it. Before starting this project, you must have first integrated the Arduino Lilypad Library as without it you wont be ab ...
Hello friends, few day ago I have posted a tutorial on how to do Arduino Simulation in Proteus . In that post, we have used an Arduino Library for Proteus but as this library is in its initial phases that's why currently it supports only three basic Arduino boards which are Arduino UNO, Arduino Mega2560 and Arduino Mega1280. But as we know there are numerous Arduino boards which are used these days. So, I searched a little and I came across this amazing Arduino Lilypad Library for Proteus which has the support for few other arduino boards, so I thought to share it with you guys. I have tested this library myself as always and its 100% working. I have tested it on Proteus 7 and I think it will work fine on Proteus 8 as well. As we have the support for above three boards in the previous libr ...
