Project Files of Arduino Pro Mini Library for Proteus
Libraries
Code
Projects
SimulationArduinoProMiniLibraryforProteus.zip
Arduino Pro Mini Library for Proteus
Arduino Pro Mini Library for Proteus comes as a ZIP archive of 2 files (3.8 KB, 35.5 KB unpacked) holding Proteus library files.
- LIBProteus library
- IDXProteus library index
Description
This is the download page of Arduino Pro Mini Library for Proteus, the file package of the tutorial Arduino Pro Mini Library for Proteus, published on The Engineering Projects in December 2015. Here you get the ZIP file (3.8 KB) with the Proteus library files (LIB and IDX), the list of files it contains, the README when there is one, and the installation steps in order.
What this library is
Arduino Pro Mini Library for Proteus adds Arduino Pro Mini to Proteus as a schematic component: once installed, the part appears in the Pick Devices list under its own name, with its real pin layout, and can be placed and wired like any built-in device. It is a symbol-and-footprint library: it draws and routes the part; to see it work in simulation, pair it with the HEX file or the controller model as the tutorial shows.
The tutorial opens with: “Hello friends, hope you all are fine and having fun with your lives.” That article is the detailed guide; the sections below cover the files.
What is inside the ZIP file
- ArduinoProMiniTEP.LIB – Proteus library, 35.3 KB
- ArduinoProMiniTEP.IDX – Library index, 262 B
The archive unpacks to 35.5 KB; there is no README inside, so the steps below stand in for it.
How to download
Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and ArduinoProMiniLibraryforProteus.zip comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.
How to install
- Step 1: Extract ArduinoProMiniLibraryforProteus.zip with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
- Step 2: Close Proteus and copy ArduinoProMiniTEP.LIB and ArduinoProMiniTEP.IDX into its LIBRARY folder (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY).
- Step 3: Start Proteus, press P and search for "ArduinoProMiniTEP"; place and wire it as in the tutorial.
Read the detailed guide
This page is for the files. The tutorial above explains the circuit and the code step by step and shows the working results; read it before you build. Questions about the download or the installation go in the comments below; more Proteus downloads are listed further down this page.
The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.
File Structure
File Structure262 B35.3 KBGallery4 images from the tutorialOpen the tutorial
Gallery4 images from the tutorialThe circuit, the board and the results as they appear in Arduino Pro Mini Library for Proteus. Open an image for its full size.
README
READMEDevelopment2 releases, newest first
Development2 releases, newest first-
V2.0Arduino Pro Mini Library for Proteus V2.0
ZIP archive · 44.1 KB · 7 files · 11,529 downloads
Since V1.0:+7 new−2 removedFile changes
- +Arduino Pro Mini Library for Proteus V2.0.DSN
- +Arduino Pro Mini Library for Proteus V2.0.PWI
- +ArduinoCode.ino.hex
- +ArduinoCode/ArduinoCode.ino
- +Last Loaded Arduino Pro Mini Library for Proteus V2.0.DBK
- +Proteus Library Files/ArduinoProMini2TEP.IDX.IDX
- +Proteus Library Files/ArduinoProMini2TEP.IDX.LIB
- −ArduinoProMiniTEP.IDX
- −ArduinoProMiniTEP.LIB
-
V1.0Arduino Pro Mini Library for Proteusthis page
ZIP archive · 3.8 KB · 2 files · 15,284 downloads
Installation4 steps
Installation4 stepsFrom the download to a working project, in order. The steps follow what the package contains.
You will need
- Proteus Design SuiteProteus 8 or newer (Labcenter), on Windows
- Any archive toolWindows, macOS and Linux extract ZIP files on their own
Steps
- 1
Extract the archive
Right-click ArduinoProMiniLibraryforProteus.zip and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (Arduino Pro Mini Library for Proteus) as it is.
- 2
Copy the library files into Proteus
Move ArduinoProMiniTEP.LIB and ArduinoProMiniTEP.IDX into the LIBRARY folder of your Proteus installation: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY for Proteus 8, or the matching Proteus 7 folder. Older versions keep it under ProgramData\Labcenter Electronics. If Proteus is open, close it first.
- 3
Restart Proteus and place the component
Start Proteus, open a schematic, press P (Pick Devices) and search for the component by the name used in the tutorial. It appears with its pins ready to wire.
- 4
Follow the tutorial
Arduino Pro Mini Library for Proteus explains every connection and setting in order; keep it open beside the files while you build.
FAQs10 questionsContact TEP
FAQs10 questionsHow do I download Arduino Pro Mini Library for Proteus?
Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.
What is inside the archive?
Arduino Pro Mini Library for Proteus comes as a ZIP archive of 2 files (3.8 KB, 35.5 KB unpacked) holding Proteus library files. Open the File Structure tab for the full list of 2 files.
What should I do if the download does not start?
Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.
Is this file free?
Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.
How do I check that the file arrived complete?
Compare its SHA-256 with the one on this page, 318d41af923b900a19071d65475112df72d76fa2bc7f22f9108db1740965019c. In PowerShell run Get-FileHash "ArduinoProMiniLibraryforProteus.zip"; on macOS or Linux run shasum -a 256 "ArduinoProMiniLibraryforProteus.zip". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.
Do I need WinRAR to open the ZIP file?
No. Windows, macOS and Linux open ZIP archives on their own (Extract All, or double-click). WinRAR and 7-Zip work too. Extract the whole archive before using the files.
Where do I put the LIB and IDX files?
Both files go into the LIBRARY folder of your Proteus installation (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY; Proteus 7 has the same folder under its own name). Restart Proteus afterwards and search for the component with P.
Which Proteus version does the library need?
The tutorial names the Proteus version the library was made and tested with. Most TEP libraries work in Proteus 7 and Proteus 8; if the component does not appear after a restart, check that both the LIB and the IDX file were copied and that Proteus was fully closed while copying.
Why does the component show but not simulate?
A library without a model file (DLL) gives you the symbol and the pins for drawing and PCB design; the simulation needs the matching model or a HEX file on the controller, exactly as the tutorial describes.
Which version should I use?
The newest version in the Development tab is usually the one to take; it carries the fixes and the extra models, and the tab lists which files each release added or changed. Older versions stay available for projects built with them.
Members skip the wait. Log in or join TEP.
- 15,284Total downloads
- 12%Popularity
- ProteusCategory
- 0Comments
- ssyedzainnasirUploaded by
- 19 Dec 2015Uploaded at
SHA-256318d41af923b900a19071d65475112df72d76fa2bc7f22f9108db1740965019c
Need help with this file?
TagsRelated Proteus
All Proteus tutorials
Comments
0