TEP DOWNLOAD CENTER

Project Files of How to Measure Frequency using Arduino

Libraries Code Projects Simulation

tep://download-terminal How to measure Frequency using Arduino.rar RAR archiveVerified0 downloadsFree

measure frequency, measure frequency using arduino, frequency measurement, frequency measure arduino

Proteus simulation · File 1 of 1

Download Project Files

Download Project Files comes as a RAR archive of 4 files (29.3 KB, 181.8 KB unpacked) holding a Proteus simulation and an Arduino sketch.

DSNProteus simulation
INOArduino sketch

Description

Project Files is the download package that goes with our tutorial How to Measure Frequency using Arduino. On this page you can download the RAR file (29.3 KB) and see what is inside before you save it: 4 files in 2 folders, a ready Proteus simulation and an Arduino sketch. The tutorial explains the design; this page gets the files onto your computer and into use.

What this package is

Project Files is the file package of How to Measure Frequency using Arduino. Everything the article refers to is in it, named as the article names it, so you can follow along without hunting for files. It belongs to our Arduino series; the related downloads at the bottom of this page come from the same series, and the tutorial links the parts that go with it.

What is inside the RAR file

How to Measure Frequency using Arduino.DSN – Proteus simulation, 84.1 KB
How_to_Measure_Frequency_using_Arduino.ino – Arduino sketch, 647 B
How to Measure Frequency using Arduino.PWI – PWI file, 2.2 KB
Last Loaded How to Measure Frequency using Arduino.DBK – DBK file, 94.9 KB

The archive unpacks to 181.8 KB; there is no README inside, so the steps below stand in for it.

How to download

Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and How to measure Frequency using Arduino.rar comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.

How to install

Step 1: Extract How to measure Frequency using Arduino.rar with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
Step 2: Open How_to_Measure_Frequency_using_Arduino.ino in the Arduino IDE, pick board and port and Verify (Export Compiled Binary gives the HEX).
Step 3: Open How to Measure Frequency using Arduino.DSN in Proteus and press Play.

Simulation and results

The included Proteus project (How to Measure Frequency using Arduino.DSN) is the quickest way to see Project working: open it, press Play and compare with the screenshots in the tutorial. If nothing runs, make sure every library file was copied before Proteus started and that Program File points at the HEX on your disk; the FAQs tab covers the usual causes.

Read the detailed guide

This page is for the files. The full tutorial, How to Measure Frequency using Arduino, explains the circuit and the code step by step and shows the working results and the simulation; read it before you build. Questions about the download or the installation go in the comments below; more Arduino downloads are listed further down this page.

The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.

Read How to Measure Frequency using Arduino

File Structure

How to measure Frequency using Arduino.rar4 files · 2 folders · 181.8 KB unpacked

How to measure Frequency using Arduino/4 files · 181.8 KB

How_to_Measure_Frequency_using_Arduino/1 file · 647 B

INO How_to_Measure_Frequency_using_Arduino.inoArduino sketch 647 B

DSN How to Measure Frequency using Arduino.DSNProteus simulation 84.1 KB

PWI How to Measure Frequency using Arduino.PWIPWI file 2.2 KB

DBK Last Loaded How to Measure Frequency using Arduino.DBKDBK file 94.9 KB

Gallery4 images from the tutorialOpen the tutorial

The circuit, the board and the results as they appear in How to Measure Frequency using Arduino. Open an image for its full size.

Videofrom the tutorial

Watch the project run before you download. The player loads only when you press play.

How to Measure Frequency using ArduinoWatch on YouTube

README

README no readme

This package has no README file. The Install tab explains where each file goes, and the tutorial How to Measure Frequency using Arduino walks through the whole project.

Development1 release

6 May 2016
Download Project Filesthis page

The only release of this package so far. When a newer version is published, it appears above with its own download page.

Installation4 steps

From the download to a working project, in order. The steps follow what the package contains.

You will need

Proteus Design SuiteProteus 7 or 8 (Labcenter), on Windows
Arduino IDE1.8 or 2.x, with the board of the tutorial chosen under Tools → Board
WinRAR or 7-ZipWindows cannot open RAR archives on its own

Steps

1
Extract the archive
Right-click How to measure Frequency using Arduino.rar and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (How to measure Frequency using Arduino) as it is.
2
Open the sketch in the Arduino IDE
Open How_to_Measure_Frequency_using_Arduino.ino, select your board and port under Tools, then Verify. Sketch → Export Compiled Binary writes the HEX file a simulation needs.
3
Open the example simulation
Open How to Measure Frequency using Arduino.DSN in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
4
Follow the tutorial
How to Measure Frequency using Arduino explains every connection and setting in order; keep it open beside the files while you build.

How to add a library in Proteus 8

FAQs7 questionsContact TEP

How do I download Download Project Files?

Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.

What is inside the archive?

Download Project Files comes as a RAR archive of 4 files (29.3 KB, 181.8 KB unpacked) holding a Proteus simulation and an Arduino sketch. Open the File Structure tab for the full list of 4 files.

What should I do if the download does not start?

Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.

Is this file free?

Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.

How do I check that the file arrived complete?

Compare its SHA-256 with the one on this page, 55b1fb768acf197633eb3cb3cbb146af43854ccbec1119d1fb352e97828059eb. In PowerShell run Get-FileHash "How to measure Frequency using Arduino.rar"; on macOS or Linux run shasum -a 256 "How to measure Frequency using Arduino.rar". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.

Do I need WinRAR to open the RAR file?

RAR archives need WinRAR, 7-Zip or another RAR-capable tool; Windows cannot open them on its own. Extract the whole archive before using the files.

How do I get the HEX file into the simulation?

Compile the sketch in the Arduino IDE (Sketch → Export Compiled Binary gives you the HEX next to the sketch), then in Proteus double-click the board, set Program File to that HEX and run.

preparing · How to measure Frequency using Arduino.rar

Rating

Your download will be ready shortly

Preparing your download…

Members skip the wait. Log in or join TEP.