Hi Everyone! Hope you’re well today. I welcome you on board. In this post today, I’ll walk you through the Introduction to CA3130.The CA3130 is a BiMOS Operational Amplifier that comes with MOSFET at the output. The term BiMOS suggests that it projects the advantage of both Bipolar and CMOS op-amp technology.
This IC comes with high bandwidth due to bipolar op-amps and consumes less current due to CMOS op-amp, making it a perfect fit for mobile jammers and voltage follower circuits.
I suggest you read this post all the way through as I’ll detail the complete Introduction to CA3130 covering datasheet, pinout, features, and applications. Let’s get started.
Introduction to CA3130
The CA3130 is a BiMOS Operational Amplifier that contains MOSFET at the output. This chip consumes les ...
Hi Friends! Hope you’re well today. I welcome you on board. Today, I’ll walk you through the Introduction to INA219.The INA219 is a current sensor module that incorporates the I2C protocol for submitting the data obtained through sensing current, voltage, and power. It is a bi-directional zero drift current/ power sensing module mainly used in digital multimeters and power profilers.
I suggest you read this post all the way through as I’ll detail the complete Introduction to INA219 covering datasheet, pinout, features, and applications.
Let’s get started.
Introduction to INA219
INA219 is a current/power sensor module mainly employed to sense the power, voltage or current where up to 128 samples can be averaged together to get filtering in noisy environments. This data is then s ...
Hi Guys! I welcome you on board. Happy to see you around. In this post today, I’ll walk you through the Introduction to IRF1010E.The IRF1010E is an N-channel power MOSFET that comes with low turn-on resistance and is mainly used in fast-switching applications. The maximum power dissipation of this device is 170W and the pulsed drain current is quite high i.e. 330A.
I suggest you buckle up as I’ll detail the complete Introduction to IRF1010E covering datasheet, pinout, features, and applications.
Let’s get started.
Introduction to IRF1010E
The IRF1010E is an N-channel power MOSFET mainly employed for fast-switching applications.
This chip is a three-terminal device with terminals drain, source, and gate. It is a voltage-controlled device as opposed to a bipolar junction trans ...
Hey Pals! We hope you are doing Great. Today, we are going to design another application of DLD Logical Gates i.e. Half Subtractor. In our previous lectures, we covered Adders in detail, where we studied both Half Adders & Full Adders. Now its time to discuss its reciprocal i.e. Subtractors.
In this session, we'll seek the answers to the following topics:
What is Half Subtractor?
Working Principle of Half Subtractor.
Truth-table of Half Subtractor.
Simulation of Half Subtractor in Proteus using three Logic Gates.
Designing of Half Subtractor with NOR gate.
So, let's get started:
What is Subtractor?The functionality of Subtractors is exactly the opposite of Adders(we discussed in previous lectures) and defined as:A Subtractor is a simple DLD Electronic circuit, d ...
Hello Learners! We welcome you on the Board. We hope you are doing Great. Today we'll talk about the Tips that will be useful and functional Tips that will work best for you if you are thinking to shift in the new build.
If statistics are to be believed, the UK is something of a new-build heaven. Every year an estimated 247,000 more houses are built than demolished. On the face of things, new-build properties seem the dream. Remember the days of worrying about a lack of damp-proof course in older properties. Or, what about that chimney stack that can't be moved, but acts as a total eyesore in your front room.
While more traditional problems might have been erased, new ones have come in their place. Today's guide is all about showcasing how you ca ...
