Bonjour trainees!!! Welcome to the Engineering projects, We hope you are doing great. In our previous lecture, we discussed the first type of clippers in detail i.e. Series Clippers. Today, we are going to discuss the next two types of Clippers i.e. Shunt Clippers and Dual Clippers. Here are the types of Clippers from the last lecture:
So, today, we are going to cover the below concepts:
what is a Shunt Clipper?
Types of Shunt Clippers
Implementation of shunt Clippers in Proteus ISIS.
Dual Clippers basics.
Implementation of Dual Clippers in Proteus ISIS.
So, let's get started:
What is a Shunt Clipper?
In Shunt Clippers(Parallel Clippers), the diode is connected in Shunt(Parallel) to the input signal source & the load resi ...
Hey buddies, hope you all are fine. In our previous tutorial, we studied Half Wave Rectification and have seen that it rectifies the half wave of the AC signal. Today, we are going to study Full Wave Rectification to rectify the complete AC source. We will design the simulation of the Full Wave Rectifier in Proteus software. So, let's get started:
What is Full Wave Rectification?
A comprehensive definition of full-wave rectification is:
Full-wave rectification
is a process to convert both cycles(positive & negative) of input(sinusoidal) wave to pulsating DC
(Direct current).
We have studied in the previous lecture that Half Wave Rectifiers are used to convert only one cycle(either positive or negative) of an AC signal into a DC signal, thus dissipating the 50% energy of the o ...
Hey pals! I wish you are doing great. Welcome to a new lesson about the Digital Logic Circuits in The Engineering Projects. In the past tutorials, we Designed the Basic JK Flip Flop. Today, we'll talk about the following Points:
What are JK Flip Flops?
What are the Master Slave Flip Flops?
How does the Circuit of Master Slave Flip Flop looks?
How types of JK Flip Flop different from each other?
How does the simulation of Master JK Flip Flip take place in Proteus ISIS?
Moreover, we'll also learn some key concepts in DID YOU KNOW portions. Yet Let's recall some points about the topic. Flip Flops are the building block of a huge number of electronic systems and devices. A Flip Flop is a Digital circuit that can take the bits as input, wor ...
Hello students! Welcome to the new tutorial on Python. We all know that Python is one of the most popular programming languages, and there are hundreds or thousands of developers that are earning a handsome amount with the help of this easy programming language. In the previous lecture, we studied the range in the sequence, and in the present class, our concern is having the command on the sets in Python. We know you are curious about the set's details, but before this, I want to share the list of topics that will be covered in this class.
What is a set in the Python programming language?
What are some properties that distinguish the set from other data types?
What is the mutable data type, and how is it related to the set?
Introduction of the Jupyter notebook.
Can we have duplicate ...
New York City recently sealed over 300 construction sites in one month alone due to safety violations. The massive shutdown of construction sites was triggered by the demise of seven construction workers in total this year, with three deaths reported in May. The construction industry in the US is now under scrutiny, followed by these deaths.
In the past, the US Occupational Safety and Health Administration or OSHA came into effect with the sole aim to protect workers in the States. Large corporations and conservative politicians shun the act because they find it interfering and hindering the production of valuable goods and services.
During the Trump presidency, the president nominated a director for the regulatory body, but the Senate never confi ...
Science, technology, engineering, and math are the foundations of our daily lives. They are the tools that professionals use to get things done and get them done right. That’s just one reason that STEM education is so important. Over the past few decades, a sea-change in educational theories has swept through academic institutions. Old ideas about a liberal arts education as a path to success have slowly been replaced by a growing determination to emphasize STEM education and encourage students to pursue STEM paths and STEM careers to develop the next generation of professionals.
In this article, we’ll look at some of the reasons that STEM education is so important. To do so, we’ll need to think about traditional education and why it’s now outdated ...
Welcome to the next lesson of our python programming class. In the last session, we looked at the use of If-else statements and created simple programs to demonstrate the concept. While loops are another type of conditional statement, and in this tutorial, we'll look at how they're used.
What will you learn?
In this article, you'll learn how to prematurely exit a while loop, a Python control structure for endless iteration. You will also learn how to write conditions in a single line to produce short and readable code.
Iteration in while loop
The term "iteration" refers to the practice of repeatedly running the same piece of code. A loop is a type of programming structure that implements iteration.
Bo ...
Hey peeps! Welcome to an exciting tutorial on Python in which you will learn about the Python reverse list. We are on a series of deep learning phases where Python is under our observation. In the last tutorial, we saw the variables in Python and practised many codes in the TensorFlow. Today, we are interested to practice many interesting methods in an easy way. These are the built-in functions and you do not have to be an expert in the programming to perform them in TensorFlow. All you need is to read this tutorial and have the TensorFlow working fine. Before going deep into the topic, it is important to have a look at the list of content that you will learn today:
How do you define the python reverse list?
Why we should know about the python reverse list or keywords?
How do you practi ...
This is the next lesson in our Python course. Previously, we looked at an overview of the different data types in python such as dictionaries, Boolean and sets. This tutorial will focus on Python sets to get a deeper understanding of this data type, so let's get started. During your schooling, there is a good chance you learned about sets and set theory. Venn diagrams may even be familiar to you:
Don't worry if you don't recognize this! You should still be able to access this tutorial without any problems. Rigidly defining a set in mathematics can be both abstract and difficult to understand. A set is thought of as a well-defined group of unique objects, which are sometimes called "elements."
Python's built-in set type facilitates the grouping of ...
Hi Mentees! I hope you all are having a Productive Day. In our previous lecture, we discussed the DLD Basic Logic Gates and simulated them in Proteus. Today, we are going to use these standard logic gates and will design another logic gate named NOR Gate and will also simulate it in Proteus.
In this tutorial, we'll learn the following concepts:
What is a NOR Gate?Why NOR is called Universal Gate?
How to derive other Gates through NOR Gate?
Advantages of NOR Gate.
Let's begin the exploration:
What is a NOR Gate?"NOR gate is designed by inverting the output of an OR Gate, so it gives a HIGH output, only when all the inputs are LOW."In simple words, a NOR Gate has an OR Gate followed by the NOT Gate, as shown in the below figure:
...
