Hello Folks! I welcome you on board. Happy to see you around. In this post today, I’ll walk you through the Introduction to D13009K.
D13009K is a high voltage fast switching power transistor that falls under the category of NPN transistors. The collector current of this device is 12A which projects it can endure load under 12A. This chip is mainly used in amplification and switching applications. The small current change at one pair of terminals is used to produce a large current change across the remaining terminals. The power dissipation is 100W which features the amount of power this chip dissipates during the working of this integrated chip.
I recommend you check out this post all the way through as I’ll demonstrate the complete Introduction to D13009K covering datasheet, pin ...
Hi Folks! I welcome you on board. Thank you for clicking this read. Happy to see you around. In this post today, I’ll walk you through the Introduction to CA3140.The CA3140 is a general-purpose op-amp that comes with a 4.5MHz frequency. It is a BiMOS Operational Amplifier incorporated with MOSFET Input/Bipolar Output that extends the advantages of both… high-voltage bipolar transistors and high-voltage PMOS transistors on a single integrated chip.
I suggest you read this post all the way through as I’ll detail the complete Introduction to CA3140 covering datasheet, pinout, features, and applications. Let’s jump right in.
Introduction to CA3140
The CA3140 is a general-purpose op-amp that comes with MOSFET Input/Bipolar Output and extends the advantages of both… high- ...
Hi Folks! I welcome you on board. Happy to see you around. In this post today, I’ll detail the Introduction to TDA2030. This device incorporates a TDA2030 audio amplifier chip that produces 18 W output power with low harmonic distortion.I suggest you read this post till the end as I’ll walk you through the complete Introduction to TDA2030 covering pinout, datasheet, features, and applications.
Let’s get started.
Introduction to TDA2030
TDA2030 is a monolithic integrated circuit that comes in a Pentawatt package, mainly used as a low-frequency class AB amplifier.
The audio amplifier is a basic circuitry used to amplify the audio signal obtained through a device like a microphone.
Audio amplifiers are widely used in scores of app ...
Hi Guys! I hope you’re well today. Happy to see you around. In this post today, I’ll walk you through the Introduction to LM747.LM747 is a general-purpose dual-operational amplifier IC. This chip contains two operational amplifiers on board and belongs to the LM’xx’ family where LM stands for linear monolithic. In this chip, analog components are incorporated into silicon.
I suggest you buckle up as I’ll detail the complete Introduction to LM747 covering datasheet, pinout, features, equivalents, and applications.
Let’s jump right in.
Introduction to LM747
Designed by National Semiconductor, LM747 is a general-purpose dual-operational amplifier integrated chip.
Two operational amplifiers are incorporated that share common power supply leads and a bias network.
...
Update: We have created a new version of this library, which you can check here: Soil Moisture Sensor Library for Proteus V2.0.
Hi Friends! Hope you’re well today. I welcome you on board. In this tutorial, I’ll be discussing the Soil Moisture Sensor Library for Proteus. You won't find Soil Moisture Sensor Library in Proteus and we’re going to share its Proteus Library very first time. I have previously shared many Proteus Libraries for digital and analog sensors and today I’m discussing something new. Excited to get a hold of the Soil Moisture Sensor Library? Me too. In the upcoming days, I’ll keep sharing different libraries related to sensors. If you’re curious to sneak into the nitty-gritty of sensors not available in the Proteus library alre ...
Hi Friends! Hope you’re well today. I welcome you on board. Today, I’ll walk you through the Introduction to INA219.The INA219 is a current sensor module that incorporates the I2C protocol for submitting the data obtained through sensing current, voltage, and power. It is a bi-directional zero drift current/ power sensing module mainly used in digital multimeters and power profilers.
I suggest you read this post all the way through as I’ll detail the complete Introduction to INA219 covering datasheet, pinout, features, and applications.
Let’s get started.
Introduction to INA219
INA219 is a current/power sensor module mainly employed to sense the power, voltage or current where up to 128 samples can be averaged together to get filtering in noisy environments. This data is then s ...
Hi Friends! Hope you’re well today. In this post today, I’ll walk you through the detailed Introduction to Arduino Mega 2560 Rev3.The Arduino Mega 2560 Rev3 is a microcontroller board that is based on the ATmega2560 microcontroller.
The Arduino boards are widely used in the automation industry and embedded projects. Other boards like Arduino Uno, Arduino Nano, Arduino Every, Arduino Beetle all seem a good pick for the projects that require little memory to store the program. However, when the nature of projects becomes complex, requiring more memory and a rich set of I/O interfaces, the Arduino Mega 2560 Rev3 comes into play. In order to power up these Arduino boards, we need to use a Power supply for electronics or we can also use the USB port on ...
Hi Guys! Hope this finds you well. Thank you for clicking this read. In this post today, I'll walk you through the Mosfet what the Mosfet is and how it works.
The MOSFET (Metal Oxide Semiconductor Field Effect Transistor) transistor is a semiconductor device widely used for switching and amplifying electronic signals. The MOSFET is a core of integrated circuit and it can be designed and fabricated in a single chip as they come in small sizes.
The MOSFET carries four-terminal called: source(S), gate (G), drain (D) and body (B) terminals. The body of the MOSFET is connected to the source terminal, making it a three-terminal device like a field-effect transistor. The MOSFET is a common transistor that is used in both analog and digital circuits.
T ...
Hi Guys! Hope you’re well today. I welcome you on board. In this post today, I’ll detail the Introduction to CD4035.CD4011 IC belongs to the CD40xx CMOS IC series. The CD4011 chip comes with four independent NAND gates. This device is used to perform the Boolean function Y = A × B or Y = A + B in positive logic. This IC is widely used in many applications including Portable Audio Docks, AV Receivers, and Blu-Ray Players.
I suggest you read this entire post till the end as I’ll walk you through the complete introduction to CD4011 covering datasheet, pinout, features, truth table, alternatives, and applications.
Let’s jump right in.
Introduction to CD4011
CD4011 IC belongs to the CD40xx CMOS IC series. The CD4011 chip comes with four independent NAND gates.
It is important to ...
Hello Folks! Hope you’re well today. Happy to see you around. In this post today, I’ll walk you through the Introduction to IRF2807.
The IRF2807 is an N-channel MOSFET made up using advanced process technology to obtain extremely low on-resistance. This device is fully avalanche and is mainly used in fast switching applications. It comes in TO-package which is universally accepted for commercial-industrial applications.
I suggest you buckle up as I’ll detail the complete Introduction to IRF2807 covering datasheet, pinout, features, and applications.
Let’s dive in.
Introduction to IRF2807
The IRF2807 is an N-channel MOSFET that comes with a power dissipation of around 200W.
This device is mainly used for fast switching applications and low thermal resistance and low packag ...
