Hello friends, I hope you all are doing great. In today’s tutorial, we will discuss What is the Current Source. In an electrical system, there are two main sources first one is a voltage source and the other one is the current source. There are further two types of current sources real and ideal current source. The current produced by the ideal current source has the same value irrespective the variation in the circuitry voltage. As the current of the ideal source does not depend on any parameter of circuitry like the voltage, resistance, so it also called independent source.
The current source is the correspondent of the voltage source. In today's post, we will have a look at its working, types, circuits, ideal sources and some other related fact ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to TIP125. It is a bipolar PNP transistor, which is created for swapping and intensification submissions. It is the corresponding of transistor TIP121. The transistor is such a constituent which shows a very significant imperative on diverse electrical and electronic constituents and circuits.
There is no electronic expedient which doesn't have a transistor in its circuitry. The transistor is available in NPN and PNP configuration according to their uses. These instruments also show a significant regulation in the adaptation of current and intensification of an input signal. In today’s post, we will have a look at its protection, d ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to 74ls04. 74LS04is a participant of 74XXYY integrated sequence. The seventy-four sequences are numerical logic incorporated circuitries. This integrated circuit consists of 6 not gates. These gats do the function of reversing of different functions. To the existence of six gates, it also is known as hex inverter.
This integrated circuit is offered in numerous suites. You can select a suitable suite dependent on conditions. This module has fourteen pinouts which perform different functions. It is used in different memory units. In today’s post, we will have a look at its protection, wreck, oddness, privileges, etc. I will also shar ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to TIP35. It is a reliable silicon NPN transistor that is projected to use in common persistence amplification and swapping capitulations. It is existing in TO-247 that is no more used by most fabricators. It's corresponding transistor TIP36 which is PNP transistor.
It is a communal transistor which is used in several industrial projects where audile magnification is required. Its structures are good-observing much the similar refusing for the exciting power acceptance that is rather lesser. In today’s post, we will have a look at its fortification, wreckage, eminence, claims, etc. I will also share some links where I have connecte ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at a detailed Introduction to MAX30100. MAX30100 is a heart pulse rate monitor sensor. This sensor consists of two Light Emitting Diodes (LEDs), (one emits infrared light and the other emits red light) modifiable optics, low noise signal processor that detects heart pulse rate signal. Its operating voltage is from 1.8v to 3.3v.
The MAX30100 is used in different industrial and medical equipment such as fitness measurement devices, medical devices, and different wearable instruments. In today's post, we will have a look at its working, pinout, protocol, features, etc. I will also share some links where I have interfaced it with other microcontrollers. If you have any questions about it please ask ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at a detailed Introduction to nRF52840. nRF52840 is a low-power 2.4 GHz wireless system-on-chip (SoC). It integrates a multi-protocol 2.4 GHz transceiver, an Arm Cortex-M4F CPU and flash memory. It is the best system-on-chip (SoC) for any short-range wireless personal area network or IPv6-enabled automation applications.
nRF52840 supports low energy Bluetooth, 802.15.4, ANT™ and user proprietary 2.4 GHz protocols. nRF52840 is used in different industrial projects such as industrial mesh networks, advanced personal fitness devices, and smart city infrastructure. In today's post, we will have a look at its working, specifications, applications, pinout, etc. I will also share some links where I have ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at a detailed Introduction to TCS3200. TCS3200 is a color-detecting sensor, it consists of TAOS TCS3200 RGB sensor chip and four white LEDs. It is used to detect visible color in a measurable range. This sensor has an array of a photodetector diode, some diodes are equipped with different color filters i.e. red, blue or green color and some diodes do not have any filter.
TCS3200 has different applications such as test strip reading, sorting by color and ambient light sensing. In today's post, we will have a look at its working, protocol, pinout, specification, etc. I will also share some links where I have interfaced it with other microcontrollers. If you have any questions about it ask in the c ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at a detailed Introduction to DS18B20. DS18B20 is a temperature sensor that can measure temperature from -55oC to +125oC with an accuracy of +- 5%. It follows 1 wire protocol which has revolutionized the digital world. Because of its 1 wire protocol, you can control multiple sensors from a single pin of Microcontroller.
DS18B20 is normally used in industrial projects where high accuracy is necessary. I will give you a detailed overview of this temperature sensor in today's post where we will have a look at its Pinout, working, protocol, etc. I will also share some links to projects where I have interfaced it with Arduino or other microcontrollers. If you have any questions, please ask in comment ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to S8550. S8550 is a PNP transistor henceforth during reverse biasing both the collector and emitter will be open and during forward biasing these will be closed. The value of gain is 300 this value governs the magnification ability of the transistor. Its gain is very high therefore it is used for magnification solicitations.
When it is completely biased it can permit a maximum 700mA current to drift crosswise the collector and emitter. This phase is named as Saturation Region and the distinctive voltage permitted across the (VCE) or (VCB) can be 20V and 30V correspondingly. In today’s post, we will have a look at its protection, ...
I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to ESP-01. ESP-01 is an inexpensive, small-sized WiFi module, which consists of TCP/IP stack along with a built-in microcontroller. So, we can directly program this small chip and can bring WiFi capability in our Embedded projects. When first time this ship came into the market in August 2014, it got a lot of attention by users. The main reason for it to seek attention is that this module allows the microcontroller to connect with a WiFi available (and programmed to connect) and it follows Hayes Style Commands and develops a TCP/IP network.
ESP-01 chip integrates an antenna, RF balun, power amplifier, filters, and power arrangement module. ESP-01 is used in industry and many projects a ...
