Hello friends! Today, we will work through the EasyVR message Training Error: Recognition Failed . I originally encountered this error while training voice commands for an Arduino UNO project. Commander connected to the board, but the training attempt failed when I spoke the first command. Repeating the same attempt did not solve it. In my original setup, loading an appropriate EasyVR example and changing the shield's J12 connection from PC to SW allowed training to continue. That observation is useful, but it needs an important explanation: the correct jumper position depends on the shield revision and the communication path being used. SW is not a universal cure for every recognition error. We will separate communication problems from training and microphone problems, then return to the ...
Hello friends! In the previous tutorial, we introduced voice recognition using the EasyVR Shield . Now we will prepare the words that our project needs to recognize. We will use EasyVR Commander to connect to the shield, create a command group, train its entries, and test the results before writing the Arduino application. Our example is the same five-command project: FORWARD, REVERSE, LEFT, RIGHT, and STOP. Training these words is only part of the job. We also need to record their group number and individual indexes, because those numbers are what the controller will use to select an action. A well-trained vocabulary with an incorrect software mapping still produces the wrong behavior. The screenshots below come from the original EasyVR setup, so the appearance of a newer Commander releas ...
