Hello everyone, today I am going to share a complete project which is DS1307 Arduino based digital Clock in Proteus ISIS. In this project, I have designed a digital clock using Arduino UNO and DS1307 RTC Module. So, first of all, if you haven't yet installed then, you should install Arduino Library for Proteus using which you will be able to easily simulate Arduino baords in Proteus. Along with Arduino Library you will also need to install DS1307 Library for Proteus, which I have shared in my previous post as we are gonna use this RTC Module DS1307 for designing our digital clock.
So, now I hope that you have installed both these libraries successfully and are ready to design this DS1307 Arduino based Digital Clock. I have given the Simulation and ...
Hello Everyone, hope you all are fine and having fun with your lives. Today, I am going to interface GPS Module with Arduino in Proteus ISIS software. Recently, I have shared this amazing GPS Library for Proteus, using which you can quite easily simulate your GPS Module in Proteus software. Today, I am going to interface this GPS Module with the Arduino UNO board and will simulate the result in Proteus software. I am going to use TinyGPS Library and will get Longitude and Latitude out of this GPS Module.
So, if you are new to GPS and you haven't yet installed the GPS Library for Proteus, then you must first download that library and install it. I am using Arduino board in today's tutorial but you can use any other microcontroller as well like PIC ...
Hey Guys! Glad to see you here. I welcome you on board. In this tutorial today, I’m going to share the Analog PIR Sensor Library for Proteus. We have already shared the digital PIR Sensor Library for Proteus V1.0. Moreover, you should also check the latest version of PIR Sensor Library V3.0. If you don’t know what is PIR sensor, you must read this post first where I’ve briefly discussed the Interfacing of PIR sensor with Arduino.
PIR (Passive Infrared Sensor) also known as a motion sensor, is used to detect motion using infrared rays. It is used in banks for security purposes. It can detect the presence of a person by identifying their motion inside. Similarly, it is used in home automation where it detects the movement in the room, giving a signal we need to turn on the light because ...
Hi Folks! Glad to see you here. Thank you for viewing this read. In this post today, I’m going to list New Proteus Libraries of Embedded Sensors.I’ve shared scores of Proteus libraries and today I’m going to pack them into one single post that will help you scan through all libraries related to sensors in one place. Moreover, if you are alien to Proteus, you can check this post on how to add a new library in Proteus.
I’m going to embed the link to each Proteus library added recently. You can download and simulate Proteus libraries from the respective links. Plus, all these libraries are compatible with Microcontrollers and Arduino boards. All links you find in this post come with two simulations i.e. one simple simulation of the sensors and anot ...
Hello friends, I hope you all are doing great. In today's tutorial, I am going to share a new Solar Panel Library for Proteus. I hope you guys are gonna enjoy this Proteus Library as it's not available in Proteus and we are presenting it for the first time. :) I am quite proud of my team. B|
We all know about Solar Panels which is an excellent renewable energy source. It is widely adopted by the inhabitants of this green planet as its totally free and converts solar energy into electricity. Solar panels are also used a lot in Engineering Projects especially related to renewable energy sources. Proteus doesn't have solar panels in its database that's why our team has designed this library. Using this Solar Panel Library for Proteus, now you can eas ...
Update: Here's the latest version of LCD library: LCD Library for Proteus V2.0.
Hello everyone, I hope you all are fine and having fun with your lives. Today, I am going to share a new LCD Library for Proteus. We all know about LCDs, used for displaying data in embedded projects i.e. sensor values or indications etc. Proteus already have LCDs in it but they are not much good-looking. So, I designed two new LCDs in Proteus that look identical to real-world LCDs.
So, I am going to share these LCD libraries in today's post. I hope you are going to enjoy them as they will add some uniqueness to your project.
I have also used these new LCDs in different projects so if you wanna see these LCDs in action then you should have a look at LCD Interfacing with Microcontrollers. In this tutorial, ...
Today, we are gonna have a look on How to Interface Ultrasonic Sensor with Arduino. Few days ago, I have posted a complete tutorial on How to Use Ultrasonic Sensor Library in Proteus and later I have posted different examples on How to Simulate Ultrasonic Sensor in Proteus. Those posts were about Proteus Simulations and weren't about hardware interfacing, so I thought today let's interface it in hardware.
Simulation is a good starting point for projects but they are really far away from real world. It happened to me a lot of times that my simulations are working perfectly fine but when I design the same circuit in hardware then it says no I am not gonna work. :) So, the bottom line is never trust simulations, unless you properly test it on hardwar ...
Hi Everyone! Glad to have you on board. In this post, we’ll cover the Arduino Pro Mini Library for Proteus V2.0.
I have already discussed its previous version i.e. Arduino Pro Mini Proteus Library V(1.0). I keep getting bug reportings from our blog readers (for previous versions), so I have tried to remove these bugs in this newer version. But if you still find any bug/error, you can approach me in the section below.
We have already shared many Proteus Libraries for Embedded sensors and these days we are trying to improve their versions.
First, we will download this library in zip format and then will use it in our Proteus software to simulate Arduino Pro Mini.
Before we go further, first we’ll detail what is Arduino Pro Mini.
What is Arduino ...
Hello friends, I hope you all are doing great and having fun in your lives. In today's tutorial, we are gonna design a Heart Beat Monitor using Arduino in Proteus ISIS. You should download this Heart Beat Sensor Library V2.0 for Proteus because we are gonna use that to detect heart beat in Proteus.
I have also used a 20x4 LCD which will display our heart rate value. You should download this New LCD Library for Proteus. I have counted the heart beat for ten seconds and then I have multiplied it with 6 to get the heartbeat per minute which is abbreviated as bpm (beats per minute). So, let's get started with Heart Beat Monitor using Arduino in Proteus ISIS.
Heart Beat Monitor using Arduino in Proteus
First of all, click the below button to downloa ...
Hello friends, I hope you all are doing great. In today's tutorial, I am going to share a new Infrared Sensor Library for Proteus. This IR sensor is not available in Proteus and we are sharing this library for the first time. I hope it will help in your Embedded Systems Projects particularly related to robotics and automation. So, if you want to work on this IR Sensor then I would suggest you to first design its simulation and then try your luck with hardware.
There are different types of Infrared Sensors & modules available in the market. Some of these modules have transmitter & receiver on separate chips and are mostly get activated when someone interrupts the light. The one we have designed has a transmitter & receiver on a single c ...
