Hey pals! I wish you are doing great. Welcome to a new lesson about the Digital Logic Circuits in The Engineering Projects. In the past tutorials, we Designed the Basic JK Flip Flop. Today, we'll talk about the following Points:
What are JK Flip Flops?
What are the Master Slave Flip Flops?
How does the Circuit of Master Slave Flip Flop looks?
How types of JK Flip Flop different from each other?
How does the simulation of Master JK Flip Flip take place in Proteus ISIS?
Moreover, we'll also learn some key concepts in DID YOU KNOW portions. Yet Let's recall some points about the topic. Flip Flops are the building block of a huge number of electronic systems and devices. A Flip Flop is a Digital circuit that can take the bits as input, wor ...
Hi Mentees! I welcome you on behalf of The Engineering Projects. In this section of this DLD Logic gates series, we are discussing different applications of logic gates. We have discussed DLD Adders and Subtractors in our previous lectures and now it's time to have a look at DLD Multiplexers.
What are Multiplexers?
What are the types of Multiplexers?
What are the two input Multiplexers?
How can we simulate the Circuit of 2 to 2 MUX in Proteus ISIS?
How can we use the 2 to 1 MUX as OR, AND and NOT gates?
What are Multiplexers?
When I heard the word Multiplexer, I thought that as Adder adds numbers, Subtractor subtracts numbers, similarly, the Multiplexer will multiply binary numbers but that's not the case. Multiplexer is defined as:
A Multiplexer(also called MUX or ...
Hello friends, hope you all are fine and having fun with your lives. In today's post, I am going to share a new DS1307 Library for Proteus. Recently, I have shared the GSM Library for Proteus, which was really appreciated by the readers so I got quite excited and have designed another new Proteus Library. Currently I am working on many Proteus Libraries. In future, I am gonna design almost all the sensors in Proteus. So stay tuned with us.
Anyways coming to today's post, today we are gonna have a look at DS1307 Library for Proteus. Using this library, now you can quite easily simulate DS1307 module in Proteus in a quite stylish way. ;) I have designed it in red color because its available in red color in market. DS1307 module is already available ...
Hello Learners! I hope you are doing great. Welcome to The Engineering Projects. In our previous lecture, we discussed How to design Half Adder with Universal Gates. In today's tutorial, we are going to design Full Adder with Logical Gates.
In today's tutorial, we will learn the complete information about:
What is Adder?
What is Full Adder?
How is the Truth Table of Full Adder?
How can we design Full Adder in Proteus ISIS?
What are the uses of Full Adder?
What is Adder?
Recalling from our previous lectures:The Adders are simple Logical Circuits that take the bits in as the input, sum the bits together and generate the sum and the carry at the output.Adders are present in computer architecture, mainly to control the ...
Hello Pupils! I welcome you to The Engineering Projects. I hope you are having a good day. In our previous lectures, we simulated almost all the DLD Logic Gates i.e. AND, OR, NOT, NOR, NAND, XOR and XNOR. I hope now you must have a complete understanding of the logic gates and their working.
Now, it's time to have a look at the reason for inventing these logic gates. These DLD logic gates are used to design different numerical modules i.e. adder, subtracter, multiplexer, de-multiplexer, encoder, decoder etc. These arithmetic modules are normally used in electronic products i.e. a simple microcontroller has numerous adders/subtractors for properly calling the registers' addresses.
So, from today onward, we are going to discuss these applications of logic gates one by one. Today, we wi ...
Hello friends, hope you all are healthy, wealthy and wise. Today's topic is about the control of stepper motor. In the last post we have seen How to control DC motor in Proteus, and now we are gonna see How to design a Stepper Motor Drive Circuit in Proteus ISIS. Stepper motors are usually of two types and the main difference between the two is in the number of wires used to control them. Mostly stepper motors use 6 wires to control them but few of them also have 4 wires to control them. Today we will have a look on the 6 wired stepper motor.
In stepper motor, there are electromagnets which gets polarized when we supply voltage to them and depolarized when we remove the voltage. These electromagnets act as a stater and when one side get magnet ...
Hello everyone, I hope you all are fine. In today's tutorial, we are going to share a new Lipo Battery Library for Proteus. Proteus has a 12V battery module in it but they are quite simple in looks, so we have simply designed a stylish looking lipo battery, I hope you will find it useful for a better project presentation.
This Proteus Library has two Lipo Batteries in it, one is of 3.7V and the second one is of 11.1V, these are normally available Lipo models in the market. Although, you can change the voltage level of these batteries from their properties panel. Let's first have a look at the brief introduction of Lipo Baterry:
What is Lipo Battery???
Lipo is an abbreviation of lithium polymer battery, designed using lithium-ion technology and ...
Update: Here are the latest versions of this library: Arduino Library for Proteus V3.0 and Arduino Library for Proteus V2.0.
Hello friends, I hope you all are fine. In today's tutorial, I am going to share a new Arduino Library for Proteus. I am quite excited about today's post as it's my first complete Arduino Library for Proteus. In my previous tutorials, I have shared these Arduino boards in separate Proteus libraries but today I have combined all the boards together in a single library. You just need to download the Proteus library zip file and install it in Proteus software. You will get all the Arduino boards in your Proteus workspace. You should also give a try to Genuino Library for Proteus.We have tested all the boards with different types of sensors. So, now you can easily use ...
Hello Mentees!, I hope you have a productive day. Welcome to The Engineering Projects. In the previous lecture, we discussed the XOR Logic Gate and designed its circuit using basic logic gates i.e. AND, OR and NOT. Today, I am going to explain another Logic Gate named XNOR Gate in detail.We are going to discuss these concepts in today's lecture:
What are Exclusive NOR Gates
Experimental Proof in Proteus ISIS.
How Truth Table of Exclusive NOR Gate is designed.
How is its Timing Diagram?
Circuit of Exclusive NOR Gate in Proteus Simulation
Applications of Exclusive NOR Gates
XNOR Gate
The exclusive NOR Gate(also called XNOR Gate) simply inverts the output of the XOR Gate(we discussed in the last lecture).So, if we simply place a NOT Gate in front of the XOR Gate, we wi ...
Hello everyone, I hope you all are fine and having fun with your lives. Today, I am going to share a semester project which is named as Automatic Street Light Project. I have designed this project in Proteus ISIS and the simulation is also given below for download. Btw this was my first project during my engineering course. :D I had really enjoyed while working on this project as I was new to electronics then.
This project is about Automatic Street Light. You must have examined on your streets that the street lights turn ON at night while they turn OFF in the day. When I was a child then I think that someone turns ON the switch in the day and then turns it OFF at night but that's really not the case. :P
In fact, these lights are automatic and have ...
