Hi Guys! Hope this finds you well. I welcome you on board. Thank you for clicking this read. In this post today, I’ll be explaining the Introduction to BC559.
BC559 is a bipolar junction transistor used to drive loads under 100mA. It falls under the family of PNP transistors and is mainly known as a current-controlled device. Where small current at one terminal is used to drive large current change at the remaining two terminals.
Read this post all the way through, as I’ll be touching pinout, working, datasheet, physical dimensions, power ratings, and applications of a BC559 transistor.
Let’s get started.
Introduction to BC559
BC559 is a PNP bipolar junction transistor mainly employed for amplification and switching applications.
It is com ...
Hey learners! Welcome to another exciting lecture in this series of signals and systems. We are learning about the transform in signals and systems, and in the previous lectures, we have seen a bulk of information about the Laplace transform. If you know the previous concepts of signal and system, then this lecture will be super easy for you to learn, but if your concepts are not clear, do not worry because we will revise all the basic information from scratch for our new readers. So, without wasting time, have a look at the topics of today.
What is z transform?
What is the region of convergence of z transform?
What are some of the important properties of the region of convergence?
How to solve the z transform?
What is an example of the z transform in MATLAB?
What are the methods fo ...
Hello everyone! I hope you all will be absolutely fine and having fun. I am going to give you a detailed Introduction to CD4051 today. CD 4051 is an analog multiplexer and demultiplexer. It has very low OFF leakage current and low ON impedance. Over full voltage ranges, very low power is dissipated by CD-4051.
CD-4051 is an eight (8) channel multiplexer and has three control input named as A, B and C. These inputs connect only 1 out of 8 channels to the output in order to obtain the desired output. Channel I/O terminals became outputs and common O/I become input terminals when CD 4051 is used as a demultiplexer. CD-4051 has a lot of amazing features e.g. binary address decoding on chip, break before make switching eliminates channel overlapping, ...
Hello Everyone! Hope you’re well today. In today's tutorial, we will have a look at D13005K NPN Transistor. We will also study D13005K Datasheet, Pinout, Power Ratings, Equivalents & Applications. As its an NPN transistor, so major charge carriers are electrons. D13005K is mainly employed for switching and amplification purpose.
Let's first recall NPN transistors: NPN transistor consists of 3 terminal, named as:
Emitter.
Collector.
Base.
If we provide voltage > 0.7V at base terminal, NPN transistor gets forward biased & starts conducting. If Base voltage D13005K NPN Transistor:
D13005K NPN Transistor
D13005K is a bipolar NPN transistor, mainly used for amplification and switching purposes.
It contains three layers where two n-doped layers surround one p-doped la ...
Hey Everyone! I hope you are doing great. I am back to give you daily dose of information so you can excel in your life. Today, I am going to uncover the details on the Introduction to 5n50. It is an N-Channel MOSFET which is designed to obtain high switching performance and minimum on state resistance in an effective way. It is a unipolar device which comes with three terminals called drain gate and source. I'll try to cover everything in detail related to this N-Channel MOSFET. Let's hop on the board and dive in the details to unlock the features of this transistor.
Introduction to 5n50
5n50 is an N-Channel MOSFET that comes in advanced DMOS, planer stripe technology.
It is designed to achieve high switching performance. As it is an N-Chann ...
Hi Friends! We welcome you on board. Electronic industry is already filled with a number of devices and components that help ease the daily life of a common man. However, there is always much room for innovation in the electronics industry when it comes to facilitating the customers. When there comes a requirement for switching and amplification, there is a need for transistors. Today, I am going to unlock the details on the Introduction to TIP120. This is an NPN Darlington transistor which is mainly used for general purpose amplification and medium power switching applications.
It comes with a Darlington pair in which two transistors are connected in such a way, the current amplified by the one transistor is being amplified further by the other ...
Hello readers, we hope you all are doing great. Welcome to the 1st lecture of Section 4 in the ESP32 Programming Series. In this section, we will interface the ESP32 module with common Embedded modules(i.e. LCD, Keypad, RTC etc.).
In today's tutorial, we will interface ESP32 with a 16x2 LCD and will display data using both Data Mode and I2C Mode. LCD is the most commonly used embedded module in IoT Projects. It is used to display different types of data i.e. sensor readings, warning messages, notifications etc.
Before going forward, let's first have a look at what is LCD and How it works:
16x2 LCD Module
LCD(Liquid Crystal Display) is a type of electronic display module that is used in a wide variety of applications and devices such as calculators, computers, mobile phones, ...
Hello everyone! I hope you all will be absolutely fine and having fun. I am going to elaborate you on Introduction to LT1054. It is a monolithic device. LT-1054 is also known as voltage regulator and bipolar capacitive voltage converter. Its mean feature is that it provides very low voltage losses as compared to the other common converters. LT 1054 also provides large output currents in comparison to general converters. It provides a voltage drop of around 1.1V while operating at 100mA.
LT 1054 provides us with a feature of regulation. This feature was not available in earlier voltage converters. We can get a regulated output just by inserting an external resistance. We can shut down LT-1054, if we ground its feedback terminal. Its internal osci ...
Hello Folks! I welcome you on board. Happy to see you around. In this post today, I’ll walk you through the Introduction to D13009K.
D13009K is a high voltage fast switching power transistor that falls under the category of NPN transistors. The collector current of this device is 12A which projects it can endure load under 12A. This chip is mainly used in amplification and switching applications. The small current change at one pair of terminals is used to produce a large current change across the remaining terminals. The power dissipation is 100W which features the amount of power this chip dissipates during the working of this integrated chip.
I recommend you check out this post all the way through as I’ll demonstrate the complete Introduction to D13009K covering datasheet, pin ...
Hi Guys! I hope you’re doing well today. I welcome you on board. In this post today, I’ll walk you through the Introduction to 1n5818.The 1n5818 is a Schottky diode. It is also known as a hot-carrier diode that is employed for extremely fast switching applications. It carries high forward surge capability and low forward drop voltage, making it a suitable pick for high-frequency applications. It is available in the DO-201AD package and comes with very small conduction losses.
I recommend you buckle up as I’ll discuss the complete introduction to 1n5818 covering the datasheet, pinout, features, and applications. Without further ado, let’s get started.
Introduction to 1N5818
The 1n5818 is a Schottky diode that is incorporated in extremely fast switching applications. It is also know ...
