Hello friends, I hope you all are doing great. In today's tutorial, I am going to share a new Rain Sensor Library for Proteus. I have got a lot of requests for designing this sensor. So finally it has been designed by our team and is ready to use in your Proteus Simulations.
Rain Sensor, as the name shows, is used for detection of rain and is common sensor used in Embedded Systems Projects. Both analog and digital rain sensors are available these days but we have only designed the digital Rain Sensor. It will give digital output and its output will be HIGH when there's rain and will remain LOW if it won't detect any rain.
As Proteus is a simulation software and we can't actually bring the rain so that's why I have placed a TestPin. If you apply H ...
Hi Guys! I welcome you on board. Thank you for clicking this read. In this post today, I’ll walk you through the Introduction to MJE13005.
The MJE13005 is a high speed and high voltage power transistor that belongs to the NPN transistor family. This device can support load up to 4A and the emitter-base voltage is 9V which is the voltage required to bias the device and start the transistor action.
I suggest you read this post all the way through as I’ll detail the complete Introduction to MJE13005 covering datasheet, pinout, features, and applications.
Let’s get started.
Introduction to MJE13005
The MJE13005 is an NPN transistor which is a high speed and high power device used for amplification and switching purposes.
This component is made of three-layers where one is p-d ...
Hi Friends! Hope you are doing great. I am back to give you a daily dose of valuable information so you can excel and grow in your relevant field. Transistors are the fundamental parts of most of the electronic circuits. Today, I am going to unlock the details on the Introduction to 2n3903. It is an NPN transistor main used for general purpose amplification and switching applications.
Transistor comes in two types i.e. NPN and PNP transistors. This transistor falls under the category of NPN transistor. This is a bipolar junctions transistor where conduction is carried out by movement of both charge carriers i.e. electrons and holes. However, electrons are major charge carriers in case of NPN transistors. If you are unsure how these bipolar transi ...
Hi Guys! Hope you’re well today. Happy to see you around. In this post today, I’ll walk you through the Introduction to Arduino Nano 33 IoT.
Arduino Nano 33 IoT is mainly used in basic IoT applications. The Internet of things is one of the most exciting and robust developments in the field of information technology.
Using this technology you can interface a network of physical things with software, sensors, or other technologies to develop communication and data exchange between devices and other systems using the internet.
For example, you can control the room temperature by interfacing the sensors in your rooms with your smartphone through WiFi. Traditional systems including control systems, wireless sensor networks, embedded systems, and hom ...
Hey Guys! Hope you all are doing great and having fun with your lives. I am back to feed your stomach with plenty of information so you can progress and grow in real life. Today, I am going to unlock the details on the Introduction to 2n3055. It is a semiconductor NPN (negative-positive-negative) power transistor which comes in TO-3 Casing.
I'll try to cover as many aspects possible related to this device so can get a brief overview about what it does and what are the applications it is used for. Let's get started.
Introduction to 2n3055
The 2n3055 is a semiconductor NPN bipolar transistor which consists of three terminals called emitter, base, and collector.
Unlike FETs(Field effect transistors) it is a current controlled device in which sm ...
Today, we are gonna have a look on How to Interface Ultrasonic Sensor with Arduino. Few days ago, I have posted a complete tutorial on How to Use Ultrasonic Sensor Library in Proteus and later I have posted different examples on How to Simulate Ultrasonic Sensor in Proteus. Those posts were about Proteus Simulations and weren't about hardware interfacing, so I thought today let's interface it in hardware.
Simulation is a good starting point for projects but they are really far away from real world. It happened to me a lot of times that my simulations are working perfectly fine but when I design the same circuit in hardware then it says no I am not gonna work. :) So, the bottom line is never trust simulations, unless you properly test it on hardwar ...
Hello friends, I hope you all are fine and having fun with your lives. Today, I am going to share a new tutorial which is Interfacing of Flame Sensor with Arduino. I have recently posted a tutorial in which I have shared the Flame Sensor Library for Proteus. Now in this tutorial, I am gonna use that Flame Sensor Library and will interface this Flame Sensor with Arduino. So, if you haven't downloaded this file then I suggest you to download this Flame Sensor Library so that you can easily simulate this flame Sensor in Proteus.
I am sharing interfacing of this Flame Sensor with Arduino today, but soon I will also post a tutorial on Interfacing of Flame Sensor with PIC Microcontroller. If you guys have any questions then ask in comments. I have also ...
Hey Friends! We welcome you on board. I am back to give you daily dose of information. Electronic components play an important role in the designing and working of electronic projects. Today, I am going to unlock the details on the Introduction to 1n751a. It is a zener diode, also known as highly reliable voltage regulator, which is mainly used in industrial, commercial, entertainment and computer applications. It is slightly different than regular diode, as regular diode conducts in only one direction while zener diode can conduct in both directions. I will discuss every aspect related to this zener diode, so you don't need to go anywhere and find all information in one place. Let's dive in and explore, what is it about and what are its main appl ...
Hello everyone! I hope you all will be absolutely fine and having fun. Today, I am going to provide a detailed discussion on Flame Sensor Arduino Interfacing. Flame sensor is an electronic device which is capable of sensing/detection of fire or a high temperature zone. It gives an indication through an LED attached at its top, just after sensing the fire. These type of sensors are usually used for short ranges. They are able to detect the fire up to 3 feet. Flame sensors is the most common device available in the market these days due to its good results and cost efficiency. You should also have a look at Flame Sensor Library for Proteus.
Flame sensors are available in the market in two types one having three pins and the other having four pins ...
Hello friends, I hope you all are doing great. In today’s tutorial, we will have a look at Introduction to PT2272. It is a CMOS (complementary metal-oxide-semiconductor) that use to design simple wireless controlling of instruments installed at some distance. This module is normally used for controlling the circuits of garage door, speed control of the fan, robots and for monitoring the alarm connected at different places for security purposes.
This integrated circuitry uses non-variable code address and no built-in encryption due to these parameters it not used for such circuits where high security is need but uses only for small or less cost security circuits such as used in home security alarms etc. In today's post, we will have a look at its w ...
