Hello friends, I hope you all are doing great. In today’s tutorial, we will discuss the Types and Usage of the Slip Rings. Slip rings are an essential part of any system that has or does rotation as a part of working. At the center of any automation system, an electric slip ring is responsible for the transmission of current from a static device to a rotating one. They are used almost with every machine that requires power and data connectivity. It is because of this reason slip rings have a significant impact on equipment consistency, action, and performance.
Slip rings enrich the mechanical-performance of the mechanism, modernize system utility, and eliminate damage-prone wires dangling from revolving joints. Slip rings are also known as rotatory ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to TIP35. It is a reliable silicon NPN transistor that is projected to use in common persistence amplification and swapping capitulations. It is existing in TO-247 that is no more used by most fabricators. It's corresponding transistor TIP36 which is PNP transistor.
It is a communal transistor which is used in several industrial projects where audile magnification is required. Its structures are good-observing much the similar refusing for the exciting power acceptance that is rather lesser. In today’s post, we will have a look at its fortification, wreckage, eminence, claims, etc. I will also share some links where I have connecte ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to ACS712. ACS712 is an AC or DC current sensor, which is used to measure AC or DC current. You should also have a look at Difference between AC & DC Power, that will help. The maximum value of AC and DC which can be measured is 30A, its output current signal can be read via analog I/O port of Arduino. It is also available in 5A and 20A version which provides precise and economical solutions for AC or DC current sensing in industrial and commercial systems.
ACS712 consists of a precise and low offset linear Hall sensor circuit with a copper conduction path located near the surface of the die. ACS712 is used in different industrial projects and commercial electr ...
Hello friends, I hope you are all fine and will be doing something special in your life. In today's post, we are gonna have a look at a detailed Introduction to MPU6050. MPU6050 is a sensor for motion processing devices. It is the world's first six-dimension motion tracking device. It was designed for low-cost and high-performance smartphones, tablets and wearable sensors. It is capable of processing nine-axis algorithms, it captures motion in X, Y and Z axis at the same time.
MPU6050 is used in different industrial projects and electronic devices to control and detect the 3-D motion of different objects. In today's post, we will have a look at its working, pinout, protocol, it's interfacing with Arduino, features, applications, etc. I will also share some links of projects wh ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at a detailed Introduction to LM35. LM35 is a type of commonly used temperature sensor, that can be used to measure temperature with an electrical output compared to the temperature in (°C). In can measure temperature in a better way than a thermistor.
LM35 is used in industries and commercial buildings where high accuracy of temperature measuring is needed. I will give you a detailed overview of this temperature sensor in today’s post where we will have a look its pinout, working, protocol, etc. I will also share some links of projects where I have interfaced it with Arduino or other microcontrollers. If you have any questions please ask in the comments, I will resolve your queries and will gu ...
Hello friends, I hope you all are doing great. In today’s tutorial, we will discuss What is Thevenin’s Theorem. There are a lot of techniques to solve complicated circuitries such as KCL and KVL. In-circuit terminology, this theorem permits any single port (The port is a pair of points which link any circuitry with the other circuits) system to transform into such circuitry which has one resistor and a single source. This method also works for the alternating current (AC) circuitries which have resistive and reactance impedances. It displays that this formula is work for (alternating current) AC circuits if these circuits have impedances instead of resistance.
This theorem was created by the French Engineer, who was specialized in telegraph engine ...
Hello friends, I hope you all are doing great. In today’s tutorial, we will have a look at What is Hall Effect Sensor and how to use for measurement of electromagnetism. As we can easily find the value of current flowing through any elements, by using ammeter, and galvanometer. But it is very challenging for us to measure the strength of the magnetic field. If we ask someone to find the magnetism and tell us its value. He will not have an answer to this question.
In 1879 an American physicist invented the hall effect sensor for the measurements of the electromagnetism. After the invention of Hall effect sensor, almost twenty years scientists were thinking about how we can use the Hall effect practically. With the simplification of the semiconduct ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to MCP23008. MCP23008 provides an 8-bit parallel input/output expansion for I2C bus and SPI applications. It has 8-bit configuration registers for input, output and polarity changing. The master device can enable input and output pins of MCP23008 by writing the Input/output configuration bits. A polarity of the input port register can be inverted with the polarity of the inversion register and all registers can be read by the system master.
MCP23008 is used in different industrial and class projects where I2C and SPI interfacing is required simultaneously. In today's post, we will have a look at its pinout, features, specifications ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to TIP3055. TIP3055 is a silicon epitaxial-ignoble NPN transistor, which is assembled in TO-218 malleable parcels. It is the best device for power swapping circuits, parallel and series controllers (regulators), output phases and high power amplifiers. Its corresponding PNP transistor is TIP2955.
It is a universal device used in many industrial projects where audio amplification is required. Its structures are attractive much the identical excluding for the maximum power indulgence that is a slightly lesser. In today’s post, we will have a look at its fortification, smashup, prominence, proposals, etc. I will also share some links ...
Hello, fellows, I hope you all are doing great. In today’s tutorial, we will discuss What is Electromagnetism. Initially, electricity and magnetism were known 2 different aspects of physics. This concept was changed by the theory of Maxwell about the electricity and magnetism in 1873, that says the interaction among positive and negative charges behaves like a single force. There were 4 different factors were found by the interactions of the positive and negative charges.
In first fact, Maxwell found that the charge either positive or negative attract or repel with a force that is inversely proportional to the square of the distance among charges. In second fact, he said that north and south poles have attraction and repulsion like the charges. In ...
