Hello friends, I hope you all are doing great. Today, I am going to share a new library, and this one is not a sensor or a module, it is a tool: the TEP Serial Monitor for Proteus , in its Advance edition. If you have simulated an Arduino in Proteus, you have used the Virtual Terminal to see what your code prints with Serial.println() . Our serial monitor does the same job in a modern window that works like the Serial Monitor of the Arduino IDE. You get a Serial Monitor , a Serial Plotter in Proteus (live graphs of your variables) and a hardware Bridge to a real COM port of your PC, plus a ready-made Arduino UNO demo. If you are new to Proteus, have a look at A complete tutorial on Proteus first. NOTICE: We are really proud of this one. As far as we know, our team is the first to design su ...
Hello friends, I hope you all are doing great. Today, I am going to share the new EM18 RFID Library for Proteus V1.1 . The EM-18 is a small black 125 kHz RFID reader: hold a card or a keyfob near it, and it sends the tag's number to your Arduino as 12 characters on a serial line. With this EM18 RFID Library for Proteus , you place tags on the reader with a click, at a distance you choose, and your Arduino reads them exactly like a real EM-18. Version 1.1 replaces the first version of this post. You now get two devices : EM18 Simple , with a tag panel on the schematic, and EM18 Advance , with a pop-up tag wallet, a tag editor and four measured RFID test tools . The new EM18 Arduino Proteus demo is a small access-control system on two Arduino UNOs, shown in the compact Simple interface of ou ...
