Project Files of How to use Capacitive Touch Sensor in Proteus ISIS ?
HowtouseCapacitiveTouchSensorinProteusISIS.rar

Download Simulation Files
Download Simulation Files comes as a RAR archive of 1 file (12.4 KB, 73.7 KB unpacked) holding a Proteus simulation.
- DSNProteus simulation
Description
This is the download page of Simulation Files, the file package of the tutorial How to use Capacitive Touch Sensor in Proteus ISIS ?, published on The Engineering Projects in April 2015. Here you get the RAR file (12.4 KB) with a ready Proteus simulation, the list of files it contains, the README when there is one, and the installation steps in order.
What this package is
Simulation Files is the file package of How to use Capacitive Touch Sensor in Proteus ISIS ?. Everything the article refers to is in it, named as the article names it, so you can follow along without hunting for files. It belongs to our Proteus series; the related downloads at the bottom of this page come from the same series, and the tutorial links the parts that go with it.
The tutorial opens with: “Hello friends! Today we will explore a capacitive-touch demonstration in Proteus and use its output to trigger a 555 timer.” That article is the detailed guide; the sections below cover the files.
What is inside the RAR file
- How to use Capacitive Touch Sensor in Proteus ISIS.DSN – Proteus simulation, 73.7 KB
The archive unpacks to 73.7 KB; there is no README inside, so the steps below stand in for it.
How to download
Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and HowtouseCapacitiveTouchSensorinProteusISIS.rar comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.
How to install
- Step 1: Extract HowtouseCapacitiveTouchSensorinProteusISIS.rar with Windows (Extract All), 7-Zip or WinRAR.
- Step 2: Open How to use Capacitive Touch Sensor in Proteus ISIS.DSN in Proteus and press Play.
Simulation and results
The included Proteus project (How to use Capacitive Touch Sensor in Proteus ISIS.DSN) is the quickest way to see Simulation working: open it, press Play and compare with the screenshots in the tutorial. If nothing runs, make sure every library file was copied before Proteus started and that Program File points at the HEX on your disk; the FAQs tab covers the usual causes.
Read the detailed guide
This page is for the files. The full tutorial, How to use Capacitive Touch Sensor in Proteus ISIS ?, explains the circuit and the code step by step and shows the working results and the simulation; read it before you build. Questions about the download or the installation go in the comments below; more Proteus downloads are listed further down this page.
The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.
File Structure
73.7 KBGallery5 images from the tutorialOpen the tutorial
The circuit, the board and the results as they appear in How to use Capacitive Touch Sensor in Proteus ISIS ?. Open an image for its full size.
Videofrom the tutorial
Watch the project run before you download. The player loads only when you press play.
How to use Capacitive Touch Sensor in Proteus ISIS ?Watch on YouTube
README
Development1 release
-
Download Simulation Filesthis page
The only release of this package so far. When a newer version is published, it appears above with its own download page.
Installation3 steps
From the download to a working project, in order. The steps follow what the package contains.
You will need
- Proteus Design SuiteProteus 7 or 8 (Labcenter), on Windows
- WinRAR or 7-ZipWindows cannot open RAR archives on its own
Steps
- 1
Extract the archive
Right-click HowtouseCapacitiveTouchSensorinProteusISIS.rar and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again.
- 2
Open the example simulation
Open How to use Capacitive Touch Sensor in Proteus ISIS.DSN in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
- 3
Follow the tutorial
How to use Capacitive Touch Sensor in Proteus ISIS ? explains every connection and setting in order; keep it open beside the files while you build.
FAQs6 questionsContact TEP
How do I download Download Simulation Files?
Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.
What is inside the archive?
Download Simulation Files comes as a RAR archive of 1 file (12.4 KB, 73.7 KB unpacked) holding a Proteus simulation. Open the File Structure tab for the full list of 1 files.
What should I do if the download does not start?
Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.
Is this file free?
Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.
How do I check that the file arrived complete?
Compare its SHA-256 with the one on this page, 2fd27b33d16543e544da8d238245a153da7a1cab60c81d0ce5fd33054a654eab. In PowerShell run Get-FileHash "HowtouseCapacitiveTouchSensorinProteusISIS.rar"; on macOS or Linux run shasum -a 256 "HowtouseCapacitiveTouchSensorinProteusISIS.rar". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.
Do I need WinRAR to open the RAR file?
RAR archives need WinRAR, 7-Zip or another RAR-capable tool; Windows cannot open them on its own. Extract the whole archive before using the files.
Members skip the wait. Log in or join TEP.
- 0Total downloads
- 4%Popularity
- ProteusCategory
- 0Comments
- ssyedzainnasirUploaded by
- 30 Apr 2015Uploaded at
2fd27b33d16543e544da8d238245a153da7a1cab60c81d0ce5fd33054a654eab



















Comments
0