No.
Proteus Tutorials
Give Your Suggestions !!!
1.
Getting Started With Microcontrollers
2.
Getting Started with PIC Microcontrollers
3.
Functions Available in PIC18F452
4.
How to Install MPLAB Software
5.
How to Install MPLAB C18 Compiler
6.
Getting Started with MPLAB
7.
LED Blinking Project on PIC Microcontroller
Hey guys hope you all are fine and healthy. Today I am going to start a new tutorial, about PIC Microcontrollers. I will start from the very basics of PIC Microcontroller so that the beginner can also learn from it and can easily work on their projects and I will also post some projects in which I will use PIC Microcontroller and will control different modules using it.
The only thing I hate about PIC Microcon ...
Hi Mentees! I welcome you on behalf of The Engineering Projects. In this section of this DLD Logic gates series, we are discussing different applications of logic gates. We have discussed DLD Adders and Subtractors in our previous lectures and now it's time to have a look at DLD Multiplexers.
What are Multiplexers?
What are the types of Multiplexers?
What are the two input Multiplexers?
How can we simulate the Circuit of 2 to 2 MUX in Proteus ISIS?
How can we use the 2 to 1 MUX as OR, AND and NOT gates?
What are Multiplexers?
When I heard the word Multiplexer, I thought that as Adder adds numbers, Subtractor subtracts numbers, similarly, the Multiplexer will multiply binary numbers but that's not the case. Multiplexer is defined as:
A Multiplexer(also called MUX or ...
Hello everyone! I hope you all will be absolutely fine and having fun. Today, I will give an elaboration about Introduction to LF351. LF-351 is basically JFET (Junction Field Effect Transistor). It is a very high speed input Op-amp (Operational Amplifier). This device is most common in the market due to its low cost and good performance characteristics. LF-351 provides a high gain bandwidth product even though it needs a very low current supply.
LM 351 also provides higher slew rates. This device is most of the times known on the basis of its applications. LM-351 is the most popular device due to its unique features. These features include low input bias current, high gain bandwidth product, loww current supply, high input impedance, internal tr ...
Welcome to the next tutorial of our Raspberry Pi programming course. Our previous tutorial taught us to configure our raspberry pi for voice control. We also discussed some methods of reducing vexing noises so that the voice command program understands you. However, in this lesson, we will learn how to tweet from Raspberry pi.
What will we learn?
Assume you wish to add tweeting into a Raspberry Pi software you're developing. This article will show you how to build a Twitter app, get access privilege tokens, and post a tweet. On our Raspberry Pi, we'll make a simple program that tweets the result of the uptime command. This is a made-up example, but it demonstrates what is needed to tweet from a raspberry pi.
For this session, a repo has been set up. Because we'll be referring to code wit ...
Hello friends, I hope you all are doing great. Today, I am going to share a new Infrared Tracker Sensor Library for Proteus. By using this library, you will be able to simulate IR based tracker sensor. This library contains 4 tracker sensors in it.
This Infrared Tracker Sensor is not present in Proteus software and we are sharing it for the first time. We have already shared 2 Proteus Libraries of Infrared sensors, you should check them as well.
Note:
You should also have a look at:
IR Proximity Sensor Library for Proteus.
Infrared Sensor Library for Proteus.
First, let's have a look at what is tracker sensor and why is it used?
What is IR Tracker Sensor???
IR Tracker Sensor uses Infrared technology and contains two IR LEDs on it. ...
Hello friends, hope you all are fine and having fun with your lives. Today, I am going to share a new project named LPG Gas Leak Detector using Arduino in Proteus ISIS. Before reading this tutorial, you must first download the Gas Sensor Library for Proteus because we are gonna use that Library and will simulate the Gas Sensor in Proteus.
In this library you will find eight sensors and all of them works exactly the same so that's why we are gonna use one of them. For LPG Gas Leak Detector Project I have used MQ-2 sensor which is used for detection of LPG gas. I have also used Arduino UNO board which you can simulate in Proteus using Arduino Library for Proteus. Moreover, I have also placed an LCD which will display either LPG gas Leak Detected or ...
Hello friends, I hope you all are doing great. Today, we are going to start Section-III of our Raspberry Pi 4 Programming Course. In this section, we will interface different Embedded Sensors with Raspberry Pi 4. Today's our first lecture in Section-III, so I am going to interface a simple LDR sensor with RPi4.
So, let's get started:
Components Required:
The following items are required to finish this Raspberry Pi
photoresistor module guide. You don't need a breadboard to accomplish
this, but having one would be helpful.Raspberry pi 4BreadboardPhotoresistor LDRJumper wires1uF Capacitor
What is a photoresist?
It is a common practice to employ photoresistors to determine the presence or absence of visible light or to quantify the amount of ...
Hi friends! I hope you are doing well! Today we are going to learn and practice a new topic which is a very crucial technique in plc programming. the topic is called “latching”. We mean by Latching to keep the output running starting from the instance of giving a kick-off command until we hit a command to stop running of the motor. Imagine my friends, operator wants to start a motor by hitting a start push button and want the motor to keep running and leave and go for doing another task or job. And then it keeps running until the operator wants to stop it. The problem here is that, once the operator releases his hand away from the push button, the motor automatically stopped and that is not like what the operator wants to do with the motor. To clear the problem that we are going to solve, ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to Atmega32. ATmega32 is eight-bit higher enactment microcontroller, it is manufactured by an Atmel (it is a designer and builder of different semiconductors materials). It is founded on enriched RISC which stands for (Reduced Instruction Set Computing) design which consists of 131 (one thirty-one) potent commands.
Mostly commands implement in one mechanism sequence. The maximum frequency at which it operates sixteen MHz. It delivers a subtle equilibrium among enactment and balance. It is the Pico Power sort of the normal ATmega328 kind which permits it to work below lesser voltage and power necessities, nearly 1.62 volts. In today’s post, we will have a look at its fort ...
Hi readers! Hopefully, you are well and exploring technology daily. Today, the topic of our discourse is the LSM6DSL iNEMO Inertial Module, Always-on 3D Accelerometer, and 3D Gyroscope. You might already know about it or something new and different.
The LSM6DSL is an iNEMO inertial module of the higher level offered by STMicroelectronics which combines a 3D accelerometer and a 3D gyroscope into one small unit. This sensor module will help to cater to clients' needs for more accuracy and energy-efficient motion sensing in the current world applications. Due to its battery-powered and continuous operation nature, it can principally used in battery gadgets such as smartphones, fitness trackers, and smartwatches.
The LSM6DSL shines especially where high-resolution motion detection is possi ...
