Hello friends, I hope you all are having fun. In today's tutorial, we will have a look at Series Clippers & their types in detail, we will also implement the simulations of Series Clippers in Proteus software. In the next article, we will discuss the next two types of Clippers i.e. Shunt Clippers & Dual Clippers. Today, We are going to learn:
What is a Clipper?
What are the types of Clippers?
Series Clippers Simulations in Proteus.
So, let's get started:
What is a Clipper???
Clipper (also known as Limiter) is an electronic circuit, which clips or limits the amplitude(positive, negative or both) of an AC source wave.
Diodes are normally used for designing Clippers and such circuits are normally referred as Diode Clipping Circuits (Diode Limiting Circuits).
...
Hello friends, I hope you all are doing great. This is the 7th lesson of our Python tutorial. We were introduced to Python numbers in the previous chapter and learned how they are utilized with expressions, so we have a good understanding of math operations.
We'll go over a couple more arithmetic functions and complex numbers in this lesson. I will try my best to keep it simple. Let's get started!
Python round function
You can work with numbers in Python using a few built-in functions. Three of the most common will be discussed in this section:
Rounding to a specific number of decimal places can be done with round().
abs(), which returns a number's absolute value.
pow(), which raises a number to a ...
Hi Mentees! I hope you all are having a Productive Day. In our previous lecture, we discussed the DLD Basic Logic Gates and simulated them in Proteus. Today, we are going to use these standard logic gates and will design another logic gate named NOR Gate and will also simulate it in Proteus.
In this tutorial, we'll learn the following concepts:
What is a NOR Gate?Why NOR is called Universal Gate?
How to derive other Gates through NOR Gate?
Advantages of NOR Gate.
Let's begin the exploration:
What is a NOR Gate?"NOR gate is designed by inverting the output of an OR Gate, so it gives a HIGH output, only when all the inputs are LOW."In simple words, a NOR Gate has an OR Gate followed by the NOT Gate, as shown in the below figure:
...
Science, technology, engineering, and math are the foundations of our daily lives. They are the tools that professionals use to get things done and get them done right. That’s just one reason that STEM education is so important. Over the past few decades, a sea-change in educational theories has swept through academic institutions. Old ideas about a liberal arts education as a path to success have slowly been replaced by a growing determination to emphasize STEM education and encourage students to pursue STEM paths and STEM careers to develop the next generation of professionals.
In this article, we’ll look at some of the reasons that STEM education is so important. To do so, we’ll need to think about traditional education and why it’s now outdated ...
As an investor or manager in the real estate industry, it is imperative to care for the property. Whether you are leasing or living on the property, it is essential to be proactive in repair and maintenance. Lack of routine inspection can lead to unprecedented expenses for landlords and homeowners. Read on to find out ways to prevent system failures and increase their service life, in turn.
It is an Extensive Activity
For proper care and maintenance of real estate, it is critical to understand the property. However, it would be best if you had qualified personnel take a look at the place to give a professional opinion. There are different types of MRO (maintenance, repair, and operations) to improve real estate management. Businesses need to keep up with the industry trends to know wha ...
Welcome to the next lesson of our python programming class. In the last session, we looked at the use of If-else statements and created simple programs to demonstrate the concept. While loops are another type of conditional statement, and in this tutorial, we'll look at how they're used.
What will you learn?
In this article, you'll learn how to prematurely exit a while loop, a Python control structure for endless iteration. You will also learn how to write conditions in a single line to produce short and readable code.
Iteration in while loop
The term "iteration" refers to the practice of repeatedly running the same piece of code. A loop is a type of programming structure that implements iteration.
Bo ...
Hey pupils, welcome to The Engineering Projects. We hope you are doing great. In today's simulation in Proteus ISIS, we'll seek the knowledge of an interesting topic. We are going to design a Television remote jammer in Proteus. We all are familiar with the TV Remote controller device and know it works when a light signal emitted by it is sensed by the television. Have a glance at the topics we will see in detail today:
Introduction to 555 Timer TV Remote Control Jammer.
Components of the circuit.
Working principle of 555 Timer Jammer.
Simulation of the Jammer of TV Remote Control using 555 Timer.
Moreover, you will also learn some interesting facts about the topic in DID YOU KNOW sections. let's jump to our first topic.
555 Timer TV R ...
Deep learning has applications in multiple industries, and this has made it an important and attractive topic for researchers. The interest of researchers has resulted in multiple types of neural networks we have been discussing in this series so far. Today, we are talking about generative advertising neural networks (GAN). This algorithm performs the unsupervised learning task and is used in different fields of life such as education, medicine, computer vision, natural language processing (NLP), etc.
In this article, we will discuss the basic introduction of GAN and will see the working mechanism of this neural network, After that, we will see some important applications of GANs and discuss some real-life examples to understand the concept. So let’s move towards the introduction of GANs ...
Greeting learners! Welcome to the new tutorial on Python, where we are going to discuss the loops. In the previous lecture, our focus was on the primary introduction of the loops in Python. If you are from a programming background, you must know that there is a little bit of difference between the loops in Python and those in other programming languages. At the end of the previous lecture, we saw the details of the basic differences and examined why we consider Python better than other languages when considering loops. In the current lecture, our focus is only on the while loop, and you will get to know its importance soon when we discuss the detail of this loop. But before this, have a look at the list of the major concepts:
What are the loops?
Why do we use the while loop in Python?
W ...
Hello friends, I hope you all are doing great. In today's tutorial, I am going to show you How to use Data types in Python. It's our 2nd tutorial in Python series. In our first tutorial, we have seen a detailed introduction to python and we have also installed PyCharm IDE to work on python.
Today, we will understand data types in detail as in order to design an efficient program, you need to select correct data types. Incorrect selection may cause memory loss and may slow your application. So, let's get started with data types in Python:
Data types in Python
Data Types are used for the classification or categorization of similar data packets. There are numerous data types available in python, which we can use depending on our projects' requirem ...
