Hi Guys! I welcome you on board. Happy to see you around. In this post today, I’ll walk you through the Introduction to ATmega4809.
The ATmega4809 is a type of microcontroller that belongs to the megaAVR® 0-series. It features an AVR® processor with a clock speed running at up to 20 MHz. It comes with a Flash memory size up to 48 KB, 256 bytes of EEPROM, and 6 KB of SRAM. It is available in 28-, 32-, 40-, or 48-pin packages.
I suggest you buckle up as I’ll detail the complete Introduction to ATmega4809 covering datasheet, pinout, features, power ratings, and applications.
Let’s get started.
Introduction to ATmega4809
The ATmega4809 microcontroller belongs to the megaAVR® 0-series that contains an AVR processor.
The series carries low power ...
Hi Guys! Hope you’re well today. Thank you for clicking this read. In this post today, I’ll walk you through the Introduction to B772.
B772 is a medium power bipolar junction transistor mainly used for switching and amplification purpose and belongs to the PNP transistor family. It comes in the TO-126 package and carries a collector current of 3A which means it can support load under 3A. The 60V is the collector-base voltage and 30V is the collector-emitter voltage while 5V is the emitter-base voltage which means it requires 5V to bias the transistor and start transistor action.
In this post, I’ll be discussing pinout, datasheet, working principle, power ratings, physical dimensions, and applications of B772.
Let’s get started.
Introduction to ...
Hi Guys! Hope you’re well today. I welcome you on board. In this post today, I’ll walk you through the Introduction to Arduino Esplora.
Looking like a videogame controller, the Arduino Esplora is an electrical device that contains an Arduino Leonardo board (microcontroller) and a number of outputs and inputs. There are a colored LED and a buzzer as outputs. And there is a light sensor, four buttons, a joystick, a microphone, an accelerometer, and a temperature sensor as inputs. In other words, it is just like another Arduino Board with integrated actuators and sensors.
Just stay with me for a little while, as I’m going to document the complete Introduction to Arduino Esplora covering pinout, working, pin description, how it’s different than othe ...
Hello Friends! Hope you’re well today. I welcome you on board. In this post today, I’ll walk you through the Introduction to IRF730.
The IRF730 is an n-channel MOSFET where major charge carriers are electrons and conduction in the transistor is carried out due to the motion of these electrons. It comes with a TO-220 package where the drain-to-source breakdown voltage is 400V and power dissipation is 100W.
I suggest you read this post all the way through as I’ll be discussing the complete Introduction to IRF730 covering datasheet, pinout, features, power ratings, equivalent, and applications.
Let’s jump right in.
Introduction to IRF730
The IRF730 is an n-channel MOSFET mainly used for switching and amplification applications in the electrical ...
Hello Everyone! Hope you’re well today. I welcome you on board. In this post today, I’ll walk you through the Introduction to Arduino USB Host Shields.
With Arduino USB host shield you can interface the USB device to your Arduino board. This USB host shield is based on MAX3421E which is mainly known as the USB host controller that contains the analog circuitry and digital logic required to apply the USB full speed peripheral to USB specifications rev. 2.0.
Moreover, this shield is compatible with TinkerKit which projects you can plug this TinkerKit module with the Arduino Boards.
Introduction to Arduino USB Host Shields
Arduino USB host shield is used to connect a USB device with the Arduino Board. Simply put, USB host shields provide the USB ...
Hello Everyone! Happy to see you around. Thank you for clicking this read. In this post today, I’ll document the Introduction to MJE13007.
MJE13007 is an NPN bipolar junction transistor that is a semiconductor device made of silicon material. This chip is mainly used for amplification and switching purposes. The collector-base voltage is 700V while the collector-emitter voltage is 400V. The power dissipation at temp 25C is 80W. This means 80W is released during the working of this device. This device can support load up to 8A because the current at the collector side is 8A.
I suggest you read this entire post till the end as I’ll include the complete Introduction to MJE13007 covering datasheet, pinout, working principle, power ratings, applications, and physical dimensions.
Let’s ...
Hi Friends! Hope you’re well today. I welcome you on board. Thank you for clicking this read. In this post today, I’ll detail the Introduction to SB560.
The SB560 is a Schottky diode, also known as a hot-carrier diode, mainly incorporated in extremely fast switching applications. It comes with low forward drop voltage and is used in the high-frequency operation. A highly reliable and efficient device, SB560 is a high forward surge capability component available in the DO-201AD package. This device carries a maximum RMS voltage of 42V while the maximum repetitive peak reverse voltage is 60V.
I suggest you go through this entire post till the end, as I’ll detail the Introduction to SB560 covering datasheet, pinout, features, and applications.
Let ...
Hi Guys! Happy to see you here. Thank you for viewing this read. In this post today, I’ll walk you through the complete Introduction to BC550. BC550 is a low-power low-frequency general-purpose bipolar transistor. It is mainly used to drive loads under 100mA. BC550 carries three terminals where a small current across one terminal is used to control the large current across the remaining terminals. It’s primarily used for amplification and switching purposes. Transistors are critical components and building blocks of modern electronic circuits. Bipolar junction transistors are divided into two main types named NPN transistors and PNP transistors. The BC550 falls under the category of NPN transistors and is available in a plastic TO-92 case. I sugge ...
Hello Everyone! Happy to see you here. I welcome you on board. In this tutorial, I’ll walk you through the Water Sensor Library for Proteus. You won't find this library in the proteus software, and we are introducing it for the very first time. It will help you to better understand the working/ operation of the water sensor.
If you want a proteus library of any sensor, that is not available in proteus already, you can share it in the comments below, I’ll try my best to create and share that library asap.
Before I go further, it’s better to scratch and get a hold of what is a water sensor? A water sensor is an electronic sensor, used to detect the presence of water. It detects the water by measuring the water's electrical conductivity. These sen ...
Hi Guys! Hope you’re well today. Happy to see you around. In this post today, I’ll detail how to prevent data loss risk in raid-based storage.
RAID (Redundant Array of Independent Disks) is a data storage virtualization technology used for data redundancy and performance improvement in an Operating System. It has redefined how storage systems store and retrieve data, and its architecture comprises multiple physical disk drive components distributed over one or more logical units.
Prevent Data Loss Risk In Raid-Based Storage
RAID levels vary from RAID 0 to RAID 51 (and beyond). Different levels have different types of redundancy offered; however, a compromise has to be made when it comes to fault tolerance and performance. Although different RAID ...
