Project Files of Nordic Thingy:91 X Library for Proteus: nRF9151 LTE-M Simulation
8af07cc443d94162b929aafa7bb4ac7a.zip

Nordic Thingy:91 X Library for Proteus V1.0
Nordic Thingy:91 X Library for Proteus V1.0 comes as a ZIP archive of 309 files (3.2 MB, 7.3 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, an Arduino sketch, an Arduino library, compiled HEX firmware and source code.
- LIBProteus library
- DLLProteus model
- DSNProteus simulation
- INOArduino sketch
- LIBArduino library
- HEXHEX firmware
- SRCSource code
Description
Nordic-Thingy91-X-Library-for-Proteus-v1.0.zip with Nordic's Thingy:91 X in Proteus (your sketch with the nRF9151 modem on SerialModem: LTE-M registration, SMS and GNSS, the sensors, the RGB LED, BUTTON 1, a Phone window, a Sensors window and a serial monitor; TEPTHNG91X.LIB, TEPNET.DLL and the TEP Boards for Proteus add-on 1.79.0), the bike alarm demo with its sketch and a README.
File Structure
1.1 KB7.7 KB11 KB8.5 KB1.5 KB1.7 KB1.9 KB5.7 KB4.9 KB1.1 KB5.8 KB9.6 KB7.2 KB2.5 KB2.1 KB1.9 KB2.1 KB4.4 KB1.1 KB3 KB3 KB1.8 KB2.5 KB3.5 KB149 B2.7 KB2 KB6.4 KB3.2 KB1.3 KB963 B8.6 KB5.9 KB6 KB12 KB1.6 KB1.3 KB14.7 KB4.3 KB6.1 KB20.1 KB8.2 KB2 KB4.5 KB311 B12.8 KB6.7 KB6.1 KB2.2 KB3.4 KB5.9 KB1.5 KB1.6 KB16.6 KB9.7 KB6.9 KB2.1 KB533 B5.7 KB7.4 KB514 B1.7 KB896 B481 B1.4 KB1012 B482 B936 B559 B467 B3.6 KB3.8 KB504 B956 B575 B455 B8.3 KB10.9 KB522 B79 B5.5 KB3.1 KB79 B442 B918 B1.4 KB1.8 KB1 KB1.3 KB1.4 KB1.8 KB1.4 KB5.7 KB502 B463 B5 KB6.5 KB3.4 KB3.4 KB500 B1.6 KB368 B406 B466 B404 B444 B460 B477 B739 B448 B1.3 KB350 B5.7 KB4 KB562 B1.5 KB2 KB550 B7.2 KB4.1 KB371 B4.5 KB3.5 KB492 B390 B478 B6.6 KB2.4 KB479 B5.1 KB1.9 KB1.3 KB1.3 KB750 B1.3 KB490 B2.2 KB1.9 KB498 B1.2 KB1.2 KB487 B5.1 KB4.6 KB371 B3.6 KB2.5 KB534 B1.5 KB1.2 KB478 B6.2 KB3 KB1.5 KB1.7 KB469 B1 KB1.7 KB433 B294 B358 B1.3 KB2.5 KB13.2 KB3.8 KB659 B510 B4.4 KB1.9 KB5.8 KB11 KB835 B518 B308 B1.3 KB3.3 KB568 B6.4 KB2.3 KB29 B436 B9.2 KB4.9 KB439 B4.2 KB1.5 KB9.3 KB7.1 KB4.7 KB2.4 KB388 B5.1 KB893 B667 B1.3 KB5.5 KB2.3 KB1.8 KB468 B882 B530 B791 B487 B894 B2 KB730 B646 B2.6 KB977 B702 B20.6 KB1.8 KB11.8 KB3.2 KB596 B406 B6.3 KB5.7 KB9.3 KB7.7 KB7.7 KB6.1 KB5.8 KB5.9 KB6.4 KB6.4 KB5.3 KB5.6 KB5.7 KB7.9 KB7.7 KB6.5 KB6.3 KB6.2 KB6.4 KB5.9 KB10.3 KB8.5 KB6.6 KB7.6 KB6.7 KB6.1 KB6.7 KB8.3 KB6.2 KB7.2 KB6.2 KB5.9 KB5.6 KB5.7 KB6.7 KB5.9 KB6.2 KB6 KB6 KB6.1 KB6.3 KB6 KB6.1 KB6.2 KB6 KB5.8 KB6.4 KB6.4 KB6.9 KB6 KB6.8 KB7 KB6.3 KB6.4 KB6.5 KB6.5 KB6.6 KB6.5 KB5.9 KB6.1 KB5.6 KB6.6 KB5.9 KB7.5 KB3.8 KB4.4 KB5.4 KB7.7 KB7.1 KB5.8 KB5.9 KB5.9 KB6.9 KB5.7 KB5.9 KB5.5 KB5.5 KB7.1 KB5.2 KB38.8 KB25.9 KB1.3 KB8.5 KB36.7 KB9.6 KB39.5 KB13.1 KB22.3 KB2.9 MB2.9 MB14.4 KB51.2 KB12.1 KBGallery12 images from the tutorialOpen the tutorial
The circuit, the board and the results as they appear in Nordic Thingy:91 X Library for Proteus: nRF9151 LTE-M Simulation. Open an image for its full size.












README
NORDIC THINGY:91 X LIBRARY FOR PROTEUS - V1.0 (YOUR ARDUINO SKETCH, LTE-M / NB-IOT WITH SMS AND GNSS, THE SENSORS)
Designed by The Engineering Projects
www.TheEngineeringProjects.com
IMPORTANT LINKS
Article (read it first - pictures, step by step, every feature explained):
https://www.theengineeringprojects.com/2026/11/nordic-thingy91-x-library-for-proteus.html
Report a bug or suggest a feature (our forum):
https://www.theengineeringprojects.com/forum
Support us (the libraries are free):
https://www.theengineeringprojects.com/donate
FILE STRUCTURE
Nordic-Thingy91-X-TEP-v1.0/
|-- Proteus Library Files/
| |-- TEPLAPTOP.LIB 39.5 KB the laptop (demo), to LIBRARY
| |-- TEPMOBILE.LIB 13.1 KB the phone (demo), to LIBRARY
| |-- TEPTHNG91X.LIB 22.3 KB the Nordic Thingy:91 X, to LIBRARY
|-- Proteus Model Files/
| |-- TEPNET.DLL 2.95 MB the board + monitors + network, to MODELS
|-- Arduino Code/
| |-- Thingy91X_Bike_Alarm/Thingy91X_Bike_Alarm.ino 9.6 KB the demo sketch
| |-- TEP Boards for Proteus/hardware/ 1.25 MB the Arduino IDE add-on 1.79.0 (300 files)
|-- Proteus Simulation/
| |-- TEPNET.DLL 2.95 MB copy of the model
| |-- Thingy91X_Bike_Alarm.hex 51.2 KB the demo sketch (U1)
| |-- Thingy91X-Cellular-Bike-Alarm.pdsprj 14.4 KB the demo: a cellular bike alarm with GNSS
|-- README.txt ~12.2 KB this file
Total: 7.30 MB (unzipped). The source code of the models is not included.
WHAT IS IT?
Proteus 8 has no nRF9151 model and no model of the Thingy's sensors, so this is NOT a real nRF9151. Our team has put a
lot of effort into building this device ourselves: it is Nordic Semiconductor's Thingy:91 X - the battery-powered
cellular IoT prototyping platform in its rubber case, with the nRF9151 SiP (an Arm Cortex-M33 with the LTE-M / NB-IoT /
DECT NR+ modem and GNSS), the nRF5340 board controller, the nRF7002 Wi-Fi companion for locating, the nPM1300 power
management with a 1350 mAh battery, the BME680, ADXL367, BMI270 and BMM350 sensors, an RGB LED and BUTTON 1 - drawn
compact, and it runs YOUR Arduino sketch in Proteus:
* You write a normal sketch and compile it in the Arduino IDE with our board package "TEP Boards for Proteus" 1.79.0
(in Arduino Code - see INSTALLATION). The Thingy has no pin headers: the sketch works with its own parts.
* The modem answers AT commands on SerialModem (115200 baud): registration (AT+CEREG?), SMS in text mode (AT+CMGF=1,
AT+CMGS, AT+CNMI and +CMT), and GNSS (AT+CGPS=1,1, AT+CGPSINFO). MODEM_ON HIGH starts it. On the real chip the
application starts the modem with Nordic's modem library and sends the same kind of AT commands through it.
* The Thingy's Phone window is the other end: the owner's phone receives the Thingy's SMS, sends SMS (with four quick
keys: STATUS, ARM, DISARM, WHERE) and sets the network and the GNSS scene (parked, driving, no fix).
* The sensors work through the board package's sensor libraries: Arduino_HS300x (temperature and humidity),
Arduino_LPS22HB (air pressure) and Arduino_BMI270_BMM150 (acceleration, rotation, magnetic field). On the real
Thingy these are the BME680, the BMI270 and the BMM350; the simulation answers the same calls. The Sensors window
(the PANEL pad) sets what they read: the temperature, the humidity, the pressure, a tilt and a SHAKE.
* LEDR / LEDG / LEDB are the RGB LED, lit when HIGH (LED_BUILTIN is LEDR). BUTTON1 is the big button, LOW while you
hold it: click it on the Thingy in the running simulation.
TEP additions: the USB port opens the serial monitor (the same window as our TEP Serial Monitor Advance); the small LTE
light shows the modem's network light; a click on the cellular plate opens the Phone window.
Limits (say them before you start): your sketch is one program on the nRF9151 (the nRF5340's Bluetooth LE, the nRF7002's
Wi-Fi locating, the gas reading, the ADXL367, BUTTON 2, the battery and the expansion connector are drawn or not
modelled). PSM and eDRX timers are not modelled; SMS is text mode only. Your sketch gets 8 KB of RAM in the simulation
(the real one: 256 KB), about 256 KB of flash, and int is 16 bits in the simulation (use long for big numbers).
ONE DEVICE (search "THINGY" in Pick Devices):
NORDIC THINGY91 X "Nordic Thingy:91 X" V1.0 (Microprocessor ICs > Cellular Boards), prefix U, model TEPNET.DLL.
Its TEP windows have no Windows title bar: the serial monitor (the USB port, 115200 baud: Monitor, Plotter and Board
tabs), the Sensors window (the PANEL pad) and the Phone window (the cellular plate).
The same TEPNET.DLL also runs our other sketch boards and the phone; it replaces any older TEPNET.DLL (keep only this
newest one in MODELS).
TEST STATUS
V1.0: verified in Proteus 8.5 on 17 Nov 2026 with the demo project as shipped. What the Proteus run showed:
* Thingy91X-Cellular-Bike-Alarm: "Modem ready", the RGB LED yellow; the GNSS scene PARKED: "GNSS fix: 31.520400,
74.358700"; "LTE: registered on the network" (blue) and the SMS "Bike alarm online" with the map link.
* BUTTON 1: ">> BUTTON 1: ARMED", the LED green. SHAKE in the Sensors window: ">> ALARM: the bike moves (1.68 g)",
the LED red, the SMS "ALARM: your bike is moving!" with the map link.
* The scene DRIVING, then WHERE from the Phone window: the moving position at 50 km/h; DISARM: "Disarmed" (blue);
STATUS: the state, 14.5 C and the position.
* about 45 s of simulation, no errors, with the Phone window, the Sensors window and the monitor open.
INSTALLATION (about 3 minutes)
1. Close Proteus. Extract the WHOLE ZIP to a normal folder (e.g. Desktop).
2. Copy everything in "Proteus Library Files" to the LIBRARY folder of Proteus, for example:
C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY
(on some PCs: C:\ProgramData\Labcenter Electronics\Proteus 8 Professional\LIBRARY). TEPTHNG91X.LIB is the device;
TEPMOBILE.LIB and TEPLAPTOP.LIB are our phone and laptop (for your own designs).
3. Copy TEPNET.DLL from "Proteus Model Files" to the MODELS folder (...\Proteus 8 Professional\MODELS) - replace an
older TEPNET.DLL (this one is the first that knows this device).
4. Delete TEPTHNG91X.IDX from the LIBRARY folder if it is there.
5. The Arduino IDE (only to compile your own sketches - the demo has its HEX file): copy the folder
"Arduino Code\TEP Boards for Proteus\hardware" into your sketchbook folder (normally Documents\Arduino), so that
Documents\Arduino\hardware\tep\avr\boards.txt exists (replace an older copy); restart the IDE. The Arduino AVR Boards
platform must be installed (it comes with IDE 1.8.x; in IDE 2.x install "Arduino AVR Boards" from the Boards
Manager once).
Tools > Board > TEP Boards for Proteus > Nordic Thingy:91 X (TEP Proteus). The sensor libraries are in the board
package: nothing to install.
6. Start Proteus. In Pick Devices (P) search "THINGY".
RUN THE DEMO
Keep the .hex file and TEPNET.DLL beside the project in "Proteus Simulation".
Thingy91X-Cellular-Bike-Alarm.pdsprj - U1 the Thingy:91 X (Thingy91X_Bike_Alarm.hex) is a cellular bike alarm hidden
under a saddle; the owner's phone is the Thingy's own Phone window. No other parts: the Thingy has everything inside.
Press Run. The monitor prints "Starting the nRF9151 modem", then "Modem ready"; the RGB LED is yellow while the modem
searches and blue once "LTE: registered on the network". In the Phone window set the GNSS scene PARKED: "GNSS fix",
and the Thingy sends "Bike alarm online" with a map link. Click BUTTON 1: "ARMED", the LED green. In the Sensors window
press SHAKE (someone moves the bike): "ALARM", the LED red, and an SMS with the map link. Set the scene DRIVING and
press WHERE: the moving position comes back. DISARM: the LED blue again; STATUS: the state, the temperature and the
position. While the alarm is on, the Thingy sends the position every 30 s.
Closed a window? The USB port opens the monitor, the PANEL pad the Sensors window, the cellular plate the Phone window.
THE PINS (the Thingy has no header pins: its parts, the core's numbers, what they do in the simulation)
LEDR / LEDG / LEDB 0 / 1 / 2 the RGB LED, lit when HIGH (digitalWrite, or analogWrite for a mix);
LED_BUILTIN is LEDR (the real P0.29 / P0.31 / P0.30)
BUTTON1 3 the big button, LOW when pressed (pinMode INPUT_PULLUP; the real P0.26)
SerialModem 4 / 5 Serial1: the modem's AT interface; MODEM_ON 6 HIGH starts the modem
Serial the USB port: the Thingy's built-in monitor
The sensors HS300x, BARO and IMU of the sensor libraries (begin() is true)
There are no header pins on the part: the Thingy has none.
PROPERTIES (double-click the part > Edit Properties)
PROGRAM the sketch's HEX (Arduino IDE: Sketch > Export Compiled Binary, board Nordic Thingy:91 X (TEP Proteus))
MONITOR YES = the built-in serial monitor on Serial; BAUD its speed (115200, or AUTO)
AUTOOPEN YES = the monitor window opens at Run (the demo: YES)
TEMPERATURE, HUMIDITY, PRESSURE the air at Run (C, %, kPa; the demo: 14.5 C, 62 %, 101.3 kPa)
TROUBLESHOOTING
* The modem never answers: set MODEM_ON HIGH and SerialModem.begin(115200) first; send AT until it answers OK.
* No SMS arrives: AT+CMGF=1 (text mode) and AT+CNMI=2,2,0,0,0 make a new SMS come straight to SerialModem as +CMT.
* "No GNSS fix yet": turn GNSS on with AT+CGPS=1,1 and set the Phone window's GNSS scene to PARKED or DRIVING.
* A sensor reads 0: call its begin() first (HS300x.begin(), BARO.begin(), IMU.begin()).
* The LED looks inverted: on the Thingy it lights when the pin is HIGH.
* An integer goes wrong above 32767: int is 16 bits in the simulation - use long.
BUG REPORTS AND FEATURE REQUESTS
Please post them in our forum with a screenshot and the Serial Monitor text:
https://www.theengineeringprojects.com/forum
LICENCES AND THIRD-PARTY NOTES
* The board model (TEPNET.DLL, with its modem) and the symbols and artwork (TEPTHNG91X.LIB) are made by The Engineering
Projects. The source code of the models is not included.
* TEP Boards for Proteus (Arduino Code): its core, the variants and the EEPROM, SPI and Wire libraries are modified
copies of the Arduino AVR core 1.8.6 - GNU Lesser General Public License 2.1 (LGPL 2.1, the text:
LICENSE-LGPL-2.1.txt); its sensor libraries and the others and our core files are MIT (LICENSE-MIT.txt).
* Proteus is a product of Labcenter Electronics and is not included. Thingy:91 X, nRF9151, nRF5340, nRF7002, nPM1300
and Nordic Semiconductor are names of Nordic Semiconductor ASA, Arduino of Arduino; the sensors' names belong to
their makers. This library is not made or endorsed by them or by Labcenter.
REBUILDING THE FIRMWARE (OPTIONAL)
The HEX file is supplied. Install TEP Boards for Proteus (INSTALLATION step 5), open Arduino Code\Thingy91X_Bike_Alarm,
select Nordic Thingy:91 X (TEP Proteus) and use Sketch > Export Compiled Binary. For a real Thingy:91 X use Nordic's nRF
Connect SDK with its modem library, SMS library, GNSS interface and sensor drivers; a SIM with an LTE-M or NB-IoT plan.
MODEL SCOPE AND LIMITS
Modelled: the RGB LED, BUTTON 1 and RESET; Serial (the Thingy's monitor); the modem on SerialModem (registration, SMS,
GNSS) with the Phone window; temperature, humidity, pressure and the IMU through the sensor libraries, set from the
Sensors window.
Not modelled: the nRF9151 itself, the nRF5340 and its Bluetooth LE, the nRF7002, the gas reading, the ADXL367, BUTTON
2, the battery and the fuel gauge, the expansion connector, PSM and eDRX. The simulation runs below real time.
VERSION
TEP Nordic Thingy:91 X library V1.0 (Nov 2026). Device NORDIC THINGY91 X (TEPTHNG91X.LIB / TEPNET.DLL), TEP Boards for
Proteus 1.79.0 (adds this device: SerialModem with SMS and GNSS, the sensors, the RGB LED, BUTTON1).
Demo sketch Thingy91X_Bike_Alarm V1.0. No other demo parts.Development1 release
-
V1.0Nordic Thingy:91 X Library for Proteus V1.0this page
V1.0 is the only release in the Download Center so far. When a newer version is published, it appears above with its own download page.
Installation10 steps
From the download to a working project, in order. The steps follow what the package contains.
You will need
- Proteus Design SuiteProteus 8 or newer (Labcenter), on Windows
- Arduino IDE1.8 or 2.x, with the board of the tutorial chosen under Tools → Board
- The compiler named in the tutorialto build the source files into firmware
- Any archive toolWindows, macOS and Linux extract ZIP files on their own
Steps
- 1
Extract the archive
Right-click 8af07cc443d94162b929aafa7bb4ac7a.zip and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (Nordic-Thingy91-X-TEP-v1.0) as it is.
- 2
Copy the library files into Proteus
Move TEPLAPTOP.LIB, TEPMOBILE.LIB and TEPTHNG91X.LIB and the files into the LIBRARY folder of your Proteus installation: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY for Proteus 8, or the matching Proteus 7 folder. Older versions keep it under ProgramData\Labcenter Electronics. If Proteus is open, close it first.
- 3
Add the simulation model
Copy TEPNET.DLL into the MODELS folder next to LIBRARY, so the component can run, not only be drawn.
- 4
Restart Proteus and place the component
Start Proteus, open a schematic, press P (Pick Devices) and search for the component by the name used in the tutorial. It appears with its pins ready to wire.
- 5
Install the Arduino library
In the Arduino IDE choose Sketch → Include Library → Add .ZIP Library and pick the library, or copy its folder into Documents\Arduino\libraries. Restart the IDE to see its examples.
- 6
Open the sketch in the Arduino IDE
Open Thingy91X_Bike_Alarm.ino, eeprom_clear.ino and eeprom_crc.ino and 17 more, select your board and port under Tools, then Verify. Sketch → Export Compiled Binary writes the HEX file a simulation needs.
- 7
Build the source code
Open abi.cpp, Arduino.h and binary.h and 52 more in the compiler named in the tutorial (MikroC, Keil, MPLAB, Code Composer or the Arduino IDE) and build it to get the firmware.
- 8
Load the HEX file
In Proteus double-click the microcontroller, set Program File to Thingy91X_Bike_Alarm.hex and run the simulation. For real hardware, flash the same file with your programmer.
- 9
Open the example simulation
Open Thingy91X-Cellular-Bike-Alarm.pdsprj in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
- 10
Follow the tutorial
Nordic Thingy:91 X Library for Proteus: nRF9151 LTE-M Simulation explains every connection and setting in order; keep it open beside the files while you build.
FAQs9 questionsContact TEP
How do I download Nordic Thingy:91 X Library for Proteus V1.0?
Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.
What is inside the archive?
Nordic Thingy:91 X Library for Proteus V1.0 comes as a ZIP archive of 309 files (3.2 MB, 7.3 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, an Arduino sketch, an Arduino library, compiled HEX firmware and source code. Open the File Structure tab for the full list of 309 files.
What should I do if the download does not start?
Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.
Is this file free?
Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.
How do I check that the file arrived complete?
Compare its SHA-256 with the one on this page, cd58f99567cfbb982ca30a2f814426e71a1a1e5bc1db5ec8338ff92f94cbb9cc. In PowerShell run Get-FileHash "8af07cc443d94162b929aafa7bb4ac7a.zip"; on macOS or Linux run shasum -a 256 "8af07cc443d94162b929aafa7bb4ac7a.zip". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.
Do I need WinRAR to open the ZIP file?
No. Windows, macOS and Linux open ZIP archives on their own (Extract All, or double-click). WinRAR and 7-Zip work too. Extract the whole archive before using the files.
Where do I put the LIB and IDX files?
Both files go into the LIBRARY folder of your Proteus installation (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY; Proteus 7 has the same folder under its own name). Restart Proteus afterwards and search for the component with P.
Which Proteus version does the library need?
The tutorial names the Proteus version the library was made and tested with. Most TEP libraries work in Proteus 7 and Proteus 8; if the component does not appear after a restart, check that both the LIB and the IDX file were copied and that Proteus was fully closed while copying.
How do I get the HEX file into the simulation?
Compile the sketch in the Arduino IDE (Sketch → Export Compiled Binary gives you the HEX next to the sketch), then in Proteus double-click the board, set Program File to that HEX and run.
Members skip the wait. Log in or join TEP.
- 0Total downloads
- 4%Popularity
- ProteusCategory
- 0Comments
- ssyedzainnasirUploaded by
- 20 Nov 2026Uploaded at
cd58f99567cfbb982ca30a2f814426e71a1a1e5bc1db5ec8338ff92f94cbb9cc
















Comments
0