Project Files of Raspberry Pi 5 Motion-Tracking Pan-Tilt Camera in Proteus Simulation
5cf63c19a63b4bd1ac3314bf31f339fd.zip

Raspberry Pi 5 Motion-Tracking Pan-Tilt Camera in Proteus Simulation V1.0
Raspberry Pi 5 Motion-Tracking Pan-Tilt Camera in Proteus Simulation V1.0 comes as a ZIP archive of 147 files (14.7 MB, 29.3 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, source code and a nested archive.
- LIBProteus library
- DLLProteus model
- DSNProteus simulation
- SRCSource code
- ZIPNested archive
Description
Raspberry-Pi-5-Pan-Tilt-Camera-Motion-Tracking-Proteus-Simulation-v1.0.zip: the complete Proteus simulation project (Raspberry Pi 5, the pan-tilt bracket, two HC-SR501 PIRs, a 1 W power LED, a 5 W resistor, an IRLZ44N, resistors, the Laptop and Mobile WiFi Monitors), the Python program pan_tilt_cam.py, every LIB and DLL the simulation needs, the TEPPi Python runtime and a README.
File Structure
391.6 KB39.5 KB13.1 KB17.9 KB10.9 KB16.2 KB157.2 KB306.9 KB60.5 KB3.3 MB34.3 KB620.8 KB36 KB169.8 KB628.1 KB99.3 KB65.3 KB4.8 MB4.1 MB80 B97.8 KB26.8 KB1.2 MB1.1 MB88.9 KB27.3 KB55.8 KB79.8 KB105.8 KB193.8 KB113.8 KB48.8 KB145.8 KB36.8 KB29.3 KB42.3 KB28.8 KB67.3 KB89.3 KB153.8 KB22.8 KB38.8 KB2.1 KB9.9 KB4.1 KB1.3 KB4.7 KB431 B2.5 KB17.5 KB283 B6.5 KB37.9 KB11.1 KB5.5 KB885 B13.6 KB9 KB878 B1.5 KB4 KB1004 B10 B110 B2.6 KB1.1 KB8.9 KB58.5 KB12.4 KB6.6 KB18.5 KB20.7 KB27.8 KB21.1 KB7.1 KB7.7 KB2.7 KB51.2 KB100.9 KB1.2 KB24.3 KB7.4 KB53.6 KB26.1 KB20.5 KB60.5 KB19.6 KB1.6 KB8.4 KB20.9 KB2.6 KB539 B1.4 KB9.7 KB2.8 KB21 B92 B7.9 KB264 B3.4 KB3.8 KB17.5 KB55.2 KB3.3 KB10.8 KB1.5 KB4.2 KB7.3 KB2.5 KB32.6 KB14.5 KB283 B17.4 KB257 B691 B14.5 KB12.8 KB3.6 KB1.7 KB37 KB418 B6.2 KB7 KB37.3 KB10.6 KB23.7 KB28.7 KB8.8 KB16.9 KB400 KB2.9 MB295 KB313 KB298 KB304.5 KB311 KB8.8 KB42.9 KB400 KB2.9 MB295 KB313 KB298 KB304.5 KB311 KB8.8 KB10.4 KBGallery12 images from the tutorialOpen the tutorial
The circuit, the board and the results as they appear in Raspberry Pi 5 Motion-Tracking Pan-Tilt Camera in Proteus Simulation. Open an image for its full size.












README
===============================================================================================================
Raspberry Pi 5 Motion-Tracking Pan-Tilt Camera in Proteus Simulation - Project V1.0
The Engineering Projects - www.TheEngineeringProjects.com
===============================================================================================================
IMPORTANT LINKS
The project tutorial (circuit, code, simulation results):
https://www.theengineeringprojects.com/2026/11/raspberry-pi-5-pan-tilt-camera-proteus-simulation.html
The libraries this project is built from (each post has its own full download and tutorial):
Raspberry Pi 5 board:
https://www.theengineeringprojects.com/2026/10/raspberry-pi-5-library-for-proteus.html
Pan-tilt bracket (two SG90 servos):
https://www.theengineeringprojects.com/2026/11/pan-tilt-bracket-library-for-proteus.html
Power LED:
https://www.theengineeringprojects.com/2026/11/power-led-library-for-proteus.html
Power resistor:
https://www.theengineeringprojects.com/2026/11/power-resistor-library-for-proteus.html
N-MOSFET (IRLZ44N):
https://www.theengineeringprojects.com/2026/11/n-mosfet-library-for-proteus.html
PIR sensor (HC-SR501):
https://www.theengineeringprojects.com/2026/10/pir-sensor-library-for-proteus-v4-0.html
Resistor:
https://www.theengineeringprojects.com/2026/11/resistor-library-for-proteus.html
Laptop WiFi Monitor:
https://www.theengineeringprojects.com/2026/10/laptop-wifi-monitor-library-for-proteus.html
Mobile WiFi Monitor:
https://www.theengineeringprojects.com/2026/10/mobile-wifi-monitor-library-for-proteus.html
Support our free work: https://www.theengineeringprojects.com/donate
FILE STRUCTURE
Pi-5-Pan-Tilt-Camera-TEP-v1.0/
|-- Proteus Library Files/
| |-- TEPHCSR501.LIB 391.6 KB a part of the project -> LIBRARY folder
| |-- TEPLAPTOP.LIB 39.5 KB a part of the project -> LIBRARY folder
| |-- TEPMOBILE.LIB 13.1 KB a part of the project -> LIBRARY folder
| |-- TEPNMOS.LIB 17.9 KB a part of the project -> LIBRARY folder
| |-- TEPPANTILT.LIB 10.9 KB a part of the project -> LIBRARY folder
| |-- TEPPOWERLED.LIB 16.2 KB a part of the project -> LIBRARY folder
| |-- TEPPOWERRES.LIB 157.2 KB a part of the project -> LIBRARY folder
| |-- TEPRESISTOR.LIB 306.9 KB a part of the project -> LIBRARY folder
| |-- TEPRPI5.LIB 60.5 KB a part of the project -> LIBRARY folder
|-- Proteus Model Files/
| |-- TEPHCSR501.DLL 400.0 KB a model -> MODELS folder
| |-- TEPNET.DLL 2.89 MB a model -> MODELS folder
| |-- TEPNMOS.DLL 295.0 KB a model -> MODELS folder
| |-- TEPPANTILT.DLL 313.0 KB a model -> MODELS folder
| |-- TEPPOWERLED.DLL 298.0 KB a model -> MODELS folder
| |-- TEPPOWERRES.DLL 304.5 KB a model -> MODELS folder
| |-- TEPRESISTOR.DLL 311.0 KB a model -> MODELS folder
| |-- TEPPi/python/ 17.54 MB Python 3.11 embeddable -> MODELS\TEPPi (33 files)
| |-- TEPPi/runtime/ 1.11 MB TEP Pi runtime, gpiozero -> MODELS\TEPPi (87 files)
|-- Proteus Simulation/
| |-- pan_tilt_cam.py 8.8 KB the program PI1 runs
| |-- Pi-5-Pan-Tilt-Camera.pdsprj 42.9 KB the project simulation
| |-- TEPHCSR501.DLL 400.0 KB copy of the model
| |-- TEPNET.DLL 2.89 MB copy of the model
| |-- TEPNMOS.DLL 295.0 KB copy of the model
| |-- TEPPANTILT.DLL 313.0 KB copy of the model
| |-- TEPPOWERLED.DLL 298.0 KB copy of the model
| |-- TEPPOWERRES.DLL 304.5 KB copy of the model
| |-- TEPRESISTOR.DLL 311.0 KB copy of the model
|-- Python Code/
| |-- pan_tilt_cam.py 8.8 KB the program (the same file)
|-- README.txt ~9.8 KB this file
Total: 29.25 MB (unzipped). The C++ source code of the models is not included.
WHAT IS IT?
A motion-tracking security camera mount you can run in Proteus: a Raspberry Pi 5 sweeps a camera on a pan-tilt
bracket, turns it to the zone where a PIR sensor sees someone, switches on a 1 W light at night, and serves a web
dashboard with presets.
* Pan-tilt bracket (PANTILTSG90TEP, M1; two SG90 servos, a 25 g camera): PAN on GPIO12 (pin 32), TILT on GPIO13
(pin 33), V+ on +5V. Pan 0 deg = looking right, 180 deg = looking left.
* Two HC-SR501 PIR sensors (HCSR501ADVTEP, TIMEDELAY 3 s): U1 the LEFT zone on GPIO17 (pin 11), U2 the RIGHT zone on
GPIO27 (pin 13); VCC from the Pi's 5 V pin (pin 2).
* The light: +5V - R1 (RESISTORPOWER5WTEP, 5.6 ohm 5 W) - D1 (POWERLED1WWHITETEP, a 1 W white LED) -
Q1 (IRLZ44NTEP); the gate from GPIO22 (pin 15) through R2 100 ohm, R3 10 kohm to GND. About 0.3 A.
* RASPBERRY PI 5 (PI1) runs pan_tilt_cam.py on Ethernet at 192.168.1.51 (port 8000).
* Laptop WiFi Monitor (PC1) and Mobile WiFi Monitor (MOB1) open http://192.168.1.51:8000/.
The rules (at the top of the program):
* PATROL: the pan sweeps 40 - 140 deg at 20 deg a second, a 1 s pause at each end, the tilt level (90 deg);
* TRACK: a PIR's motion turns the camera to its zone (left: pan 150, right: pan 30, tilt 75) until 6 s after the
last motion; MANUAL: a dashboard preset, held 15 s; then PATROL again;
* every move is eased, at most 90 deg a second; servo pulses 500 - 2500 us at 50 Hz, timed by the Pi;
* NIGHT mode (on at the start): the light on with motion, off 10 s after the last one.
Its pages:
/ the dashboard: the mode, where the camera looks, the light, the motion counts, the events
/left /center /right a preset (MANUAL for 15 s) /patrol back to PATROL
/night NIGHT mode on / off /data everything as JSON
No extra Python library: lgpio (in the TEPPi runtime and on Raspberry Pi OS), threading, http.server.
TEST STATUS
Tested in Proteus 8 Professional on Windows 11, the run that made the tutorial's screenshots (the program's times):
- 0.0 s "PATROL: sweeping 40 - 140 deg": 20 deg a second, a 1 s pause at each end, the tilt level.
- 13.1 s: someone walks into the LEFT zone (U1): "motion LEFT (1) - the camera turns left", the light ON: 327 mA,
3.16 V, 1.03 W in the LED (its junction 34 C, heading for 61 C), 598 mW in R1. Pan 150 deg asked = 2166 us; the
bracket's SG90s read 544 - 2400 us as 0 - 180 deg, so it points at 157 deg (calibrate the pulses for your servos).
- 28.6 s "back to PATROL (no motion for 6 s over)"; 32.6 s "light OFF (no motion for 10 s)".
- 35.1 s: the RIGHT zone (U2): the camera to pan 30 deg (28.5 deg on the bracket), the light on again.
- 38.6 s: CENTER from the laptop: MANUAL for 15 s; 43.4 s: RIGHT from the phone: MANUAL again; 56.1 s the light off;
58.4 s "back to PATROL (the preset's 15 s over)".
- 95.6 s of simulation in 615 s.
INSTALLATION
1. Close Proteus. Extract the WHOLE zip file, for example to your Desktop.
2. Copy the files from "Proteus Library Files" into the LIBRARY folder of Proteus, for example
C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY
3. Copy everything in "Proteus Model Files" - the DLL files and the TEPPi folder - into the MODELS folder (next
to LIBRARY).
4. Start Proteus. Press P in the schematic and search for RASPBERRY PI 5, PANTILTSG90TEP or HCSR501ADVTEP to check
that the parts are there.
RUN THE SIMULATION
1. Open "Proteus Simulation\Pi-5-Pan-Tilt-Camera.pdsprj". Keep pan_tilt_cam.py and the DLL files beside it.
2. Press Play. The camera starts to PATROL; the Pi's terminal prints a line every second.
3. Click a PIR for its pop-up and make someone walk past it: the camera turns to that zone and the light comes on.
4. Open the Laptop WiFi Monitor (PC1) or the Mobile WiFi Monitor (MOB1) and press Go: LEFT, CENTER, RIGHT, PATROL,
NIGHT.
Your own program: edit pan_tilt_cam.py.
PROPERTIES USED IN THIS PROJECT
PI1 RASPBERRY PI 5 PROGRAM=pan_tilt_cam.py, ETHERNET=IN (192.168.1.51)
M1 PANTILTSG90TEP CAMERA=25 (g), TILT_MIN=30, TILT_MAX=160
U1, U2 HCSR501ADVTEP TIMEDELAY=3 (s), WARMUP=SKIP
R1 RESISTORPOWER5WTEP 5.6 ohm (STATE 21); D1 POWERLED1WWHITETEP HEATSINK=NONE; Q1 IRLZ44NTEP
R2 100 ohm, R3 10 kohm
PC1, MOB1 HOMEPAGE=http://192.168.1.51:8000/
TROUBLESHOOTING
* The camera does not move: no 5 V on the bracket's V+, or PAN / TILT not on GPIO12 / GPIO13.
* The camera turns the wrong way: pan 0 deg looks right; swap the LEFT and RIGHT presets for a bracket mounted
the other way round.
* The light never comes on: NIGHT mode off, or Q1's gate not driven from GPIO22.
* The terminal cannot start Python: the TEPPi folder is not in MODELS.
LICENCES
* The project, the program, the parts (LIB files) and the models (DLL files) are made by The Engineering Projects
and are free for learning and for your own projects. The models use only standard Windows libraries.
The C++ source code of the models is not included; the source code is not included for any model.
* TEPPi\python is the Python 3.11 Windows embeddable package (Python Software Foundation License); TEPPi\runtime
holds our TEP Pi runtime with gpiozero and colorzero (BSD licences) - their licence files are inside the folders.
* Proteus is a product of Labcenter Electronics and is not included. Raspberry Pi is a trademark of Raspberry Pi
Ltd. This project is not made or endorsed by them.
VERSION
V1.0 - the first release of the project.
===============================================================================================================Development1 release
-
V1.0Raspberry Pi 5 Motion-Tracking Pan-Tilt Camera in Proteus Simulation V1.0this page
V1.0 is the only release in the Download Center so far. When a newer version is published, it appears above with its own download page.
Installation7 steps
From the download to a working project, in order. The steps follow what the package contains.
You will need
- Proteus Design SuiteProteus 8 or newer (Labcenter), on Windows
- Pythonto build the source files into firmware
- Any archive toolWindows, macOS and Linux extract ZIP files on their own
Steps
- 1
Extract the archive
Right-click 5cf63c19a63b4bd1ac3314bf31f339fd.zip and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (Pi-5-Pan-Tilt-Camera-TEP-v1.0) as it is.
- 2
Copy the library files into Proteus
Move TEPHCSR501.LIB, TEPLAPTOP.LIB and TEPMOBILE.LIB and 6 more and the files into the LIBRARY folder of your Proteus installation: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY for Proteus 8, or the matching Proteus 7 folder. Older versions keep it under ProgramData\Labcenter Electronics. If Proteus is open, close it first.
- 3
Add the simulation model
Copy TEPHCSR501.DLL, TEPNET.DLL and TEPNMOS.DLL and 11 more into the MODELS folder next to LIBRARY, so the component can run, not only be drawn.
- 4
Restart Proteus and place the component
Start Proteus, open a schematic, press P (Pick Devices) and search for the component by the name used in the tutorial. It appears with its pins ready to wire.
- 5
Build the source code
Open pan_tilt_cam.py, attr.py and color.py and 28 more in the compiler named in the tutorial (MikroC, Keil, MPLAB, Code Composer or the Arduino IDE) and build it to get the firmware.
- 6
Open the example simulation
Open Pi-5-Pan-Tilt-Camera.pdsprj in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
- 7
Follow the tutorial
Raspberry Pi 5 Motion-Tracking Pan-Tilt Camera in Proteus Simulation explains every connection and setting in order; keep it open beside the files while you build.
FAQs8 questionsContact TEP
How do I download Raspberry Pi 5 Motion-Tracking Pan-Tilt Camera in Proteus Simulation V1.0?
Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.
What is inside the archive?
Raspberry Pi 5 Motion-Tracking Pan-Tilt Camera in Proteus Simulation V1.0 comes as a ZIP archive of 147 files (14.7 MB, 29.3 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, source code and a nested archive. Open the File Structure tab for the full list of 147 files.
What should I do if the download does not start?
Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.
Is this file free?
Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.
How do I check that the file arrived complete?
Compare its SHA-256 with the one on this page, cad5769024954466ddceb898ccf7ea28ac907d63b85268ecbcd10bb54211b646. In PowerShell run Get-FileHash "5cf63c19a63b4bd1ac3314bf31f339fd.zip"; on macOS or Linux run shasum -a 256 "5cf63c19a63b4bd1ac3314bf31f339fd.zip". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.
Do I need WinRAR to open the ZIP file?
No. Windows, macOS and Linux open ZIP archives on their own (Extract All, or double-click). WinRAR and 7-Zip work too. Extract the whole archive before using the files.
Where do I put the LIB and IDX files?
Both files go into the LIBRARY folder of your Proteus installation (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY; Proteus 7 has the same folder under its own name). Restart Proteus afterwards and search for the component with P.
Which Proteus version does the library need?
The tutorial names the Proteus version the library was made and tested with. Most TEP libraries work in Proteus 7 and Proteus 8; if the component does not appear after a restart, check that both the LIB and the IDX file were copied and that Proteus was fully closed while copying.
Members skip the wait. Log in or join TEP.
- 0Total downloads
- 4%Popularity
- Raspberry PiCategory
- 0Comments
- ssyedzainnasirUploaded by
- 18 Nov 2026Uploaded at
cad5769024954466ddceb898ccf7ea28ac907d63b85268ecbcd10bb54211b646






















Comments
0