Hey Friends! Hope you are doing great. I am back to give you a daily dose of valuable information so you can always stay ahead of your competitors. I have previously updated the article on NPN transistor that is used for amplification and switching purpose. Today, I am going to unveil the details on the Introduction to PNP Transistor which falls under the category of bipolar junction transistors and comes with three layers i.e. two P-doped layers and one N-doped layer where an N-doped layer exists between two P-doped layers.
Main Function: Small current at one terminal is used to control large current at other terminals.
Major Charge Carriers: Holes
These NPN and PNP transistors come with their own benefits based on the nature of the e ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at a detailed Introduction to TCS3200. TCS3200 is a color-detecting sensor, it consists of TAOS TCS3200 RGB sensor chip and four white LEDs. It is used to detect visible color in a measurable range. This sensor has an array of a photodetector diode, some diodes are equipped with different color filters i.e. red, blue or green color and some diodes do not have any filter.
TCS3200 has different applications such as test strip reading, sorting by color and ambient light sensing. In today's post, we will have a look at its working, protocol, pinout, specification, etc. I will also share some links where I have interfaced it with other microcontrollers. If you have any questions about it ask in the c ...
Hello friends, hope you all are fine and enjoying life. In today's tutorial, I am gonna show how to do LED Flashing Project with 555 Timer in Proteus ISIS. Its quite a simple project and usually done by engineers in their first or second semester. I have done this project in my first semester and have learned quite a lot from it. I recently done it on Proteus so thought of sharing it with you guys. It will also work on hardware as I have tested it.
In this tutorial, we will first have a look at How to do single LED Flashing with 555 Timer in Proteus ISIS. And afterwards, we will also see how to flash two LEDs with 555 Timer in Proteus ISIS. Its quite simple and anyone one with basic knowledge of electronics can design it in his first attempt. Sti ...
Hello friends, hope you all are fine and having fun with your lives. In today's post, I am going to share GSM Library for Proteus. Yeah you have read absolutely fine, today I am gonna share the most awaited and most demanded Proteus Library. :) Till now, I have received hundreds of suggestions and requests about this Library and I have always told them that its under designing process and I will post it real soon. So finally the wait is over and we have our new GSM Library for Proteus, ready to download and simulate in Proteus. Using this GSM library for Proteus, now you can easily simulate your GSM module in Proteus and can test your code. :)
As its the first version of our GSM Library so its not complete or perfect. It is really the basic model ...
Hello friends, hope you all are fine and having fun with your lives. Today's post is about How to Reset Arduino Programmatically. Sounds a bit weird, yes it is :) but literally in some cases, this technique is the only choice you have. It recently happened to me in one of my projects, that's why I know How important it is. Before going into details, let's first have a look at the resetting feature of Arduino.
If you have worked on any Arduino board, then you must have noticed the RESET pin in Arduino and you may wonder what's the use of this pin. So, today this pin is gonna get useful. Moreover, you have also noticed that when you upload the code to your Arduino board then the Arduino resets, another way of resetting Arduino is by opening the Seri ...
Hello Folks! I welcome you on board. Happy to see you around. In this post today, I’ll walk you through the Introduction to D13009K.
D13009K is a high voltage fast switching power transistor that falls under the category of NPN transistors. The collector current of this device is 12A which projects it can endure load under 12A. This chip is mainly used in amplification and switching applications. The small current change at one pair of terminals is used to produce a large current change across the remaining terminals. The power dissipation is 100W which features the amount of power this chip dissipates during the working of this integrated chip.
I recommend you check out this post all the way through as I’ll demonstrate the complete Introduction to D13009K covering datasheet, pin ...
Hello friends , I hope you all are fine and having fun with your lives. Today, I am going to share a new project which is XBee Arduino Interfacing. In my previous tutorials in the XBee series, we have had first Introduction to XBee Module and after that we have also discussed How to Interface XBee Module with Computer. Now we are all well aware of XBee Module and can easily do the XBee Arduino Interfacing. We have seen in the previous tutorial that XBee Module works on Serial protocol so we have to use the Serial Pins of Arduino UNO board.
If you want to use any other microcontroller then you can its not a big issue, just see the way how the programming goes and convert it to the language of your microcontroller i.e. PIC Microcontrollers or 805 ...
Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at a detailed Introduction to DS18B20. DS18B20 is a temperature sensor that can measure temperature from -55oC to +125oC with an accuracy of +- 5%. It follows 1 wire protocol which has revolutionized the digital world. Because of its 1 wire protocol, you can control multiple sensors from a single pin of Microcontroller.
DS18B20 is normally used in industrial projects where high accuracy is necessary. I will give you a detailed overview of this temperature sensor in today's post where we will have a look at its Pinout, working, protocol, etc. I will also share some links to projects where I have interfaced it with Arduino or other microcontrollers. If you have any questions, please ask in comment ...
Hi Guys! Hope you’re well today. I welcome you on board. In this post today, I’ll walk you through the Introduction to TDA7294.
TDA7294 is a monolithic class AB power-based audio amplifier that comes with a DMOS output stage. It is primarily used for the amplification of audio signals in Hi-Fi field applications containing self-powered loudspeakers. The fault protection circuitry used in this device protects against short circuits.
I suggest you read this post all the way through, as I’ll detail the complete introduction to TDA7294 covering datasheet, pinout, features, and applications.
Let’s get started.
Introduction to TDA7294
TDA7294 is a monolithic class AB power-based audio amplifier that comes with a DMOS output stage.
This device comes with a wide voltage supply ra ...
Hello friends, hope you all are fine and having fun with your lives. In today's tutorial, I am gonna share another awesome library designed by our team for Proteus, which is GPS Library for Proteus. It's my second library for Proteus, the first one was Arduino Library for Proteus which I have already shared. I am really enjoying designing these modules in Proteus because its a new and quite challenging thing. I haven't found even a single website who has designed these modules in Proteus already. So, now for the first time, you can have the GPS Library for Proteus using which you can easily simulate your GPS module in Proteus and can design your code for Arduino, PIC Microcontroller or 8051 Microcontroller.
Other bloggers are welcome to share this ...
