Hi Friends! Happy to see you here. Thank you for viewing this read. Hope you’re well today. In this post, I’m going to discuss the Analog Flex Sensor Library for Proteus. You should also have a look at Digital Flex Sensor Library for Proteus.
I’ve been adding them over the last few days intending to design and share brand new libraries that are not a part of the proteus library database already. I’m adding both simple simulation and simulation with the Arduino board to help you better understand these libraries with microcontrollers and Arduino devices.
Before I go further and walk you through on how to download and simulate Analog Flex Sensor Library for Proteus, let’s get to know what’s Flex sensor first.
Simply put, a flex sensor is used to ...
Update: Here are the latest versions of this library: PIR Sensor Library for Proteus V3.0 and PIR Sensor Library for Proteus V2.0.
Hello friends, hope you are doing well. Today, I will share a new PIR Sensor Library for Proteus. PIR Sensor module is not available in Proteus so we can't use it in
our simulations. But today, I will share a new PIR Sensor Library
for Proteus which can easily simulate PIR Sensor in Proteus software.
We are quite happy that we are helping engineers by sharing these new Proteus Libraries.We all know about PIR Sensor but if you don't know then first read Interfacing of PIR Sensor with Arduino.As a quick review, a PIR sensor is used to detect motion in the environment and is commonly known as a motion sensor. It's quite helpful in security projects ...
Hello friends, hope you all are fine and having good health. In today's post, I am going to share an Ultrasonic Sensor Library for Proteus. A few days ago, I posted a tutorial on Arduino Library for Proteus, and today I am going to share the new Ultrasonic Sensor Library for Proteus. Using this library, you can easily interface Ultrasonic Sensors with different Microcontrollers like Arduino, PIC Microcontroller etc.First of all, let's have a brief introduction to ultrasonic sensor. In an ultrasonic sensor, there are two nodes available, one is the transmitter while the other is the receiver. The transmitter sends an ultrasonic wave and this wave strikes any hindrance present in front of it and then bounces back. This bounced ultrasonic sensor is th ...
Hello friends, I hope you all are doing great. In today's tutorial, I am going to share a new Solar Panel Library for Proteus. I hope you guys are gonna enjoy this Proteus Library as it's not available in Proteus and we are presenting it for the first time. :) I am quite proud of my team. B|
We all know about Solar Panels which is an excellent renewable energy source. It is widely adopted by the inhabitants of this green planet as its totally free and converts solar energy into electricity. Solar panels are also used a lot in Engineering Projects especially related to renewable energy sources. Proteus doesn't have solar panels in its database that's why our team has designed this library. Using this Solar Panel Library for Proteus, now you can eas ...
Update: We have created a new version of this library, which you can check here: Vibration Sensor Library for Proteus V2.0.
Hello friends, I hope you all are fine and having fun with your lives. Today, I am going to share a new Proteus Library named Vibration Sensor Library for Proteus. This Library is designed by our team on TEP and it's not yet published anywhere. We are the first creator of this Vibration Sensor Library for Proteus. This Library contains just one Vibration Sensor named SW-420. I will post a tutorial soon on interfacing this SW-420 Vibration Sensor with Arduino. This library is compatible with all the microcontrollers like Arduino, PIC Microcontroller or 8051 Microcontroller etc. You should also have a look at Analog Vibrati ...
Hello friends, I hope you all are doing well. In today's tutorial, I am going to share a new Proteus Library of ESP32 embedded module. ESP32 is a microcontroller board used mostly in IoT projects. It's a successor of ESP8266 or NodeMCU. We have already shared the NodeMCU Library for Proteus and I hope you guys have enjoyed it.Proteus software is not capable of handling WiFi or BLE technology, thus we can't implement these technologies in the ESP32 board. Though, you can use its input/output pins to interface embedded sensors and modules. You can also use it to design the Circuit Diagram of your Project.So, let's have a look at How to simulate ESP32 board in Proteus:
ESP32 Library for Proteus
First of all, download the zip file of Proteus Library for ESP32 board, by clicking the below b ...
Update: Here's the latest version of this library: Arduino Library for Proteus V3.0
Hi Guys! I welcome you on board. In this post today, I’ll share a new Arduino Library for Proteus V2.0. I have already shared its previous version i.e. Arduino Library for Proteus(V1.0).I have tried to remove bugs in this newer version, but still, if you find any error, you can pop your comment in the below section.
I’m thrilled to announce that it’s my second complete Arduino Library for Proteus. In my recent posts, I’ve shared separate libraries of these boards and today I am going to compile all the boards together in a single library. I have given the Proteus Library zip file download link below:
This Arduino Proteus Library V2.0 includes the following boards:
Arduino UNO
Arduin ...
Hi Guys! Hope you’re well today. Thank you for viewing this read. In this post today, I’ll walk you through the Arduino Mega 1280 Library for Proteus.
You may already be familiar with Arduino Boards, in case you don’t, they are the open-source easy to use hardware and software platform used in modern electronic projects. These boards receive inputs and convert them into outputs to activate motors, LEDs, electrical circuits, robots, and embedded systems.
They are mainly designed for newbies and non-tech geeks who hesitate to construct the electrical circuits from the get-go and hate diving into the nitty-gritty of architecting electrical wires accurately to fashion electrical circuits.
Arduino boards come with both ready-made electronic kit and ...
Hello friends, I hope you all are doing great. In today's tutorial, I am going to share a new Rain Sensor Library for Proteus. I have got a lot of requests for designing this sensor. So finally it has been designed by our team and is ready to use in your Proteus Simulations.
Rain Sensor, as the name shows, is used for detection of rain and is common sensor used in Embedded Systems Projects. Both analog and digital rain sensors are available these days but we have only designed the digital Rain Sensor. It will give digital output and its output will be HIGH when there's rain and will remain LOW if it won't detect any rain.
As Proteus is a simulation software and we can't actually bring the rain so that's why I have placed a TestPin. If you apply H ...
Hi Friends! Hope you’re well today. Today, I am going to share the Proteus Library of Current Sensor WCS1600. This sensor is not available in the Proteus Components Library and we’re sharing it for the first time. The Current Sensor WCS1600 is used to measure the current flowing through the circuit and is used in embedded systems and robotics projects. If you are new to this sensor, you must first design its simulation before playing with the hardware.
Before we move further, let’s have a brief overview of WCS1600 Current Sensor:What is WCS1600 Current Sensor?
WCS1600 comes with a drift linear hall sensor IC which gives precise and accurate values. The hall sensor IC is 9.0 mm in diameter through the hole and is incorporated with a temperature compensation circuit. To measure the p ...
