Project Files of Magnetic Hall Effect Sensor(KY-024) Library for Proteus
Libraries
Code
Projects
SimulationMagneticHallEffectSensorLibraryforProteus.zip
Proteus Library Files
Proteus Library Files comes as a ZIP archive of 6 files (40.2 KB, 333 KB unpacked) holding Proteus library files, a Proteus simulation and compiled HEX firmware.
- LIBProteus library
- IDXProteus library index
- DSNProteus simulation
- HEXHEX firmware
Description
Proteus Library Files is the download package that goes with our tutorial Magnetic Hall Effect Sensor(KY-024) Library for Proteus. On this page you can download the ZIP file (40.2 KB) and see what is inside before you save it: 6 files in 2 folders, the Proteus library files (LIB and IDX), a ready Proteus simulation and the compiled HEX firmware. The tutorial explains the design; this page gets the files onto your computer and into use.
What this library is
Proteus Library Files adds Proteus Library to Proteus as a schematic component: once installed, the part appears in the Pick Devices list under its own name, with its real pin layout, and can be placed and wired like any built-in device. It is a symbol-and-footprint library: it draws and routes the part; to see it work in simulation, pair it with the HEX file or the controller model as the tutorial shows.
What is inside the ZIP file
- MagneticHallEffectSensorTEP.LIB – Proteus library, 93.7 KB
- MagneticHallEffectSensorTEP.IDX – Library index, 710 B
- Proteus Simulation.DSN – Proteus simulation, 121 KB
- MagneticHallEffectSensorTEP.HEX – Compiled HEX file, 4.5 KB
- Last Loaded Proteus Simulation.DBK – DBK file, 110.9 KB
- Proteus Simulation.PWI – PWI file, 2.2 KB
The archive unpacks to 333 KB; there is no README inside, so the steps below stand in for it.
How to download
Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and MagneticHallEffectSensorLibraryforProteus.zip comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.
How to install
- Step 1: Extract MagneticHallEffectSensorLibraryforProteus.zip with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
- Step 2: Close Proteus and copy MagneticHallEffectSensorTEP.LIB and MagneticHallEffectSensorTEP.IDX into its LIBRARY folder (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY).
- Step 3: Start Proteus, press P and search for "MagneticHallEffectSensorTEP"; place and wire it as in the tutorial.
- Step 4: In Proteus set the controller's Program File to MagneticHallEffectSensorTEP.HEX; on hardware, flash the same file.
- Step 5: Open Proteus Simulation.DSN in Proteus and press Play.
Read the detailed guide
This page is for the files. The full tutorial, Magnetic Hall Effect Sensor(KY-024) Library for Proteus, explains the circuit and the code step by step and shows the working results and the simulation; read it before you build. Questions about the download or the installation go in the comments below; more Proteus downloads are listed further down this page.
The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.
File Structure
File Structure4.5 KB710 B93.7 KB110.9 KB121 KB2.2 KBGallery6 images from the tutorialOpen the tutorial
Gallery6 images from the tutorialThe circuit, the board and the results as they appear in Magnetic Hall Effect Sensor(KY-024) Library for Proteus. Open an image for its full size.
README
READMEDevelopment1 release
Development1 release-
Proteus Library Filesthis page
The only release of this package so far. When a newer version is published, it appears above with its own download page.
Installation6 steps
Installation6 stepsFrom the download to a working project, in order. The steps follow what the package contains.
You will need
- Proteus Design SuiteProteus 8 or newer (Labcenter), on Windows
- Any archive toolWindows, macOS and Linux extract ZIP files on their own
Steps
- 1
Extract the archive
Right-click MagneticHallEffectSensorLibraryforProteus.zip and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (Magnetic Hall Effect Sensor(KY-024) Library for Proteus) as it is.
- 2
Copy the library files into Proteus
Move MagneticHallEffectSensorTEP.LIB and MagneticHallEffectSensorTEP.IDX into the LIBRARY folder of your Proteus installation: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY for Proteus 8, or the matching Proteus 7 folder. Older versions keep it under ProgramData\Labcenter Electronics. If Proteus is open, close it first.
- 3
Restart Proteus and place the component
Start Proteus, open a schematic, press P (Pick Devices) and search for the component by the name used in the tutorial. It appears with its pins ready to wire.
- 4
Load the HEX file
In Proteus double-click the microcontroller, set Program File to MagneticHallEffectSensorTEP.HEX and run the simulation. For real hardware, flash the same file with your programmer.
- 5
Open the example simulation
Open Proteus Simulation.DSN in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
- 6
Follow the tutorial
Magnetic Hall Effect Sensor(KY-024) Library for Proteus explains every connection and setting in order; keep it open beside the files while you build.
FAQs10 questionsContact TEP
FAQs10 questionsHow do I download Proteus Library Files?
Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.
What is inside the archive?
Proteus Library Files comes as a ZIP archive of 6 files (40.2 KB, 333 KB unpacked) holding Proteus library files, a Proteus simulation and compiled HEX firmware. Open the File Structure tab for the full list of 6 files.
What should I do if the download does not start?
Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.
Is this file free?
Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.
How do I check that the file arrived complete?
Compare its SHA-256 with the one on this page, 94af0745be7f26bd943d1be38c5907c9048823ebed454942c7e167410323dc5d. In PowerShell run Get-FileHash "MagneticHallEffectSensorLibraryforProteus.zip"; on macOS or Linux run shasum -a 256 "MagneticHallEffectSensorLibraryforProteus.zip". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.
Do I need WinRAR to open the ZIP file?
No. Windows, macOS and Linux open ZIP archives on their own (Extract All, or double-click). WinRAR and 7-Zip work too. Extract the whole archive before using the files.
Where do I put the LIB and IDX files?
Both files go into the LIBRARY folder of your Proteus installation (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY; Proteus 7 has the same folder under its own name). Restart Proteus afterwards and search for the component with P.
Which Proteus version does the library need?
The tutorial names the Proteus version the library was made and tested with. Most TEP libraries work in Proteus 7 and Proteus 8; if the component does not appear after a restart, check that both the LIB and the IDX file were copied and that Proteus was fully closed while copying.
Why does the component show but not simulate?
A library without a model file (DLL) gives you the symbol and the pins for drawing and PCB design; the simulation needs the matching model or a HEX file on the controller, exactly as the tutorial describes.
How do I get the HEX file into the simulation?
Compile the sketch in the Arduino IDE (Sketch → Export Compiled Binary gives you the HEX next to the sketch), then in Proteus double-click the board, set Program File to that HEX and run.
Members skip the wait. Log in or join TEP.
- 11,335Total downloads
- 9%Popularity
- ProteusCategory
- 0Comments
- ssyedzainnasirUploaded by
- 21 May 2021Uploaded at
SHA-25694af0745be7f26bd943d1be38c5907c9048823ebed454942c7e167410323dc5d
Need help with this file?
TagsRelated Proteus
All Proteus tutorials
Comments
0