Hello everyone! I hope you all will be absolutely fine and having fun. Today, I am going to elaborate you about Introduction to TL081. TL 081 is basically a high speed Junction Field Effect Transistor (JFET) input Operational Amplifier (Op-amp). This Integrated Circuit consists of a JFET with a high voltage and bipolar transistor.
TL-081 provides low input voltage, high slew rates, low input offset current and low Offset Voltage Temperature Coefficient (OVTC). TL 081 has different features e.g. low power consumption, high input impedance, latch-up free operation, short circuit protection, wide common mode input voltage ranges, wide differential input voltage ranges etc. TL-081 can be used in white good, tablets, computers, personal electronics e ...
Hello everyone! I hope you all will be absolutely fine and having fun. Today, I am going to give you detailed discussion on Introduction to LM2904. LM 2904 consists of two builtin amplifiers. These amplifiers have high gain and they are internally frequency compensated. These amplifiers are designed for the operation from a single power supply for a large range of voltages. We can also operate them from multiply power supplies as well.
LM-2904 operates on 3.3V power supply, it is the most common power supply in digital systems. LM 2904 is also available in small sizes i.e. they are available in the latest technology DSBGA. LM-2904 has a lot unique features in comparison to the other standard amplifiers. These features include large DC voltage ga ...
Hello everyone! I hope you all will be absolutely fine ad having fun. Today, I am going to given an elaboration on Introduction to LM833. LM-833 is basically a dual general purpose amplifier. It is usually designed for audio systems. LM 833 is the most common Integrated Circuit (IC) available in the market now a days. This is due to its low cost and high performance activities. It uses bipolar technology.
LM-833 has several different features which make it ideal for general purpose applications. These features include dual supply operation, large input voltage swing, higher gain bandwidth product, higher slew rates, small input offset voltage supply etc. LM- 833 has different real life applications. These application ranges include High Fideli ...
Hello everyone! I hope you all will be absolutely fine and having fun. Today, I am going to tell you guys about Introduction to LM2902. LM2902 basically has four (4) internal builtin operational amplifiers. There builtin amplifiers are internally frequency compensated. The basic purpose behind designing this type of device is to support control systems in industries as well as automotive applications. LM-2902 is capable of operating for a wide range of voltages using a single power supply source.
Moreover, we can also operate this device from a split power source. Low current drain supply and magnitude of the power supply source, both are totally independent to each other. LM-2902 has a lot of features which make it different from the standard g ...
Hello everyone! I hope you all will be absolutely fine and having fun. Today, I am going to give you an elaboration on Introduction to LM2575. LM2575 is specially designed to simply the design of switching power supplies. It can be done by providing all the necessary active functions required in Integrated Circuit (IC) for step down regulators. LM-2575 can deliver load current of around 1A along with the good line regulation as well as load regulation. LM 2575 has different builtin functions e.g. frequency compensation, cycle by cycle current limiting, oscillator with the fixed frequency and a lot more.
LM-2575 has many amazing features i.e. it can reduce the heat sink size due to its higher efficiency parameter. In some cases even heat sink is ...
Hello everyone! I hope you all will be absolutely fine and having fun. Today, I am going to give you a detailed Introduction to ATmega328. ATmega328 is an Advanced Virtual RISC (AVR) microcontroller. It supports 8-bit data processing. ATmega-328 has 32KB internal flash memory.
ATmega328 has 1KB Electrically Erasable Programmable Read-Only Memory (EEPROM). This property shows if the electric supply supplied to the micro-controller is removed, even then it can store the data and can provide results after providing it with the electric supply. Moreover, ATmega-328 has 2KB Static Random Access Memory (SRAM). Other characteristics will be explained later. ATmega 328 has several different features which make it the most popular device in today's market. ...
Hello everyone! I hope you all will be absolutely fine and having fun. Today, I am going to share my knowledge about Introduction to LM335. LM 335 is basically an Integrated Circuit (IC) for precise temperature sensor. LM-335 operates on a current range 400uA-5mA having resistance less than 1 ohm. At 10mV/K, its absolute temperature becomes directly proportional to the breakdown voltage.
LM-335 operates as two terminal zener diode. At the temperature ranging from -40 degree Celsius to 100 degree Celsius, LM 335 can be used for each type of temperature sensing purposes. This device is available in different dimensions and in different sizes. LM-335 is most commonly available in the market due to its unique features including e.g. large temperatur ...
Hello everyone! I hope you all will be absolutely fine and having fun. I am going to give you the detailed discussion about Introduction to UC3843 today. UC 843 is basically a current mode Pulse Width Modulation (PWM) controller having fixed frequency. It is basically designed for DC to DC converter purposes as well as off line applications and it requires minimum external components. UC-3843 has three different packages which will be explained later.
UC-3843 has several different features which make it ideal and useful for a lot of real life applications. These features may include trimmed oscillator for the control of accurate duty cycle, high gain amplifier and to control power MOSFET, there is a high current totem-pole output. Moreover, some ...
Hello everyone! I hope you all will be absolutely fine and having fun. Today, I will share the details discussion on Introduction to LM311. LM 311 is basically a voltage comparator having high speed. It can operate over wide ranges of voltage i.e. from -15V to15V, in case of operational amplifier. LM-311 can also operate on 5V for the logic systems.
LM-311 output levels has the compatibility with Transistor Transistor Logic (TTL) levels circuits. At 50mA and at 50V too, LM-311 can operate lamps and relays. LM 311 can operate from 0 degree Celsius to 70 degree Celsius. LM-311 has several different features. These features include fast response time, strobe capability, wide voltage supply ranges, maximum input current, operating at single 5V power ...
Hello everyone! I hope you all will be absolutely fine and having fun. Today, I will provide you document on detailed discussion about Introduction to LM224. LM-224 has four internal builtin operational amplifiers. These amplifiers are frequency compensated. The basic purpose to design these type of device is to operate it from a single power supply sources. Moreover, they are also able to perform different tasks using split power supplies. Magnitude of power supply and the current current drain both are independent of each other.
LM-224 has a very wide range of application areas which include DC gain blocks, transducer amplifiers etc. LM 224 has a large number of amazing features include wide power supply ranges, large bandwidth, low input offs ...
