Hello Learners! Welcome to The Engineering Projects. In the previous tutorial, we discussed the first universal gate i.e. NOR Gate and simulated it in Proteus. Today, we are going to focus on the second universal gate i.e. NAND Gate. We will also derive basic logic gates from the NAND gate, to prove its universality.
Today, we'll seek the answers to the following questions:
What is a NAND Gate?What is a Universal Gate?
NAND as a Universal Gate.
NAND Gate as Universal Gate in Proteus ISIS.
Let's get started:
What is a NAND Gate?
A NAND Gate is designed by inverting the output of AND Gate and thus it gives a LOW output when all of its inputs are HIGH, otherwise, it's HGIH.In order to design a NAND gate, simply place a NOT gate in ...
Hello friends, I hope you all are doing great. In today's tutorial, I am going to share a new IR Proximity Sensor Library for Proteus. Proximity Sensors are not available in Proteus and we are sharing its Proteus library for the first time. So far, I have only shared Proteus Libraries of digital sensors but today I am sharing an analog sensor, so too excited about it.
In the next few days, I will keep on sharing Proteus Libraries of different analog sensors, so if you want any sensor in Proteus, then let me know in the comments. IR Proximity Sensors are used to detect hurdles/obstacles placed in their path. They are normally used on robots for path navigation and obstacle avoidance. So, let's have a look at How to download and simulate IR Proximit ...
Hi friends! I hope you are having a good day. Today, I am presenting the Arduino UNO library for Proteus V3.0. You should have a look at the previous versions of this library i.e. Arduino UNO library for Proteus(V2.0) and the Arduino UNO library for Proteus(V1.0). The warm response of the students to these libraries has motivated them to upgrade the library. The latest version of this library has better design and functionality, which I will discuss in detail with you.
In this article, we will discuss the basic introduction to the Arduino UNO library, its simulation, and its working. Moreover, we will discuss a small project to show you the functionality of this library. Here is the introduction to the library:
What is the Arduino UNO?
The Arduino UNO was released in 2010 by Arduino. c ...
Hi Everyone! Glad to have you on board. In this post, we’ll cover the Arduino Pro Mini Library for Proteus V2.0.
I have already discussed its previous version i.e. Arduino Pro Mini Proteus Library V(1.0). I keep getting bug reportings from our blog readers (for previous versions), so I have tried to remove these bugs in this newer version. But if you still find any bug/error, you can approach me in the section below.
We have already shared many Proteus Libraries for Embedded sensors and these days we are trying to improve their versions.
First, we will download this library in zip format and then will use it in our Proteus software to simulate Arduino Pro Mini.
Before we go further, first we’ll detail what is Arduino Pro Mini.
What is Arduino ...
Hello friends, I hope you all are fine and having fun with your lives. Today, I am going to share a list of New Proteus Libraries for Engineering Students. I have shared many Proteus Libraries till now but they all are randomly spread in blog posts, so I thought to post all those Proteus Libraries links in today's post. So that engineering students can get benefit from these awesome libraries. You should also have a look at How to add new Library in Proteus 8 Professional, if you are new to Proteus.
You can download them from their respective links and then can use them in your Proteus Projects. These modules are all compatible with Arduino and PIC Microcontroller. So, if you got into any trouble regarding these New Proteus Libraries, you can ask ...
Hey buddies, hope you all are fine. In our previous tutorial, we studied Half Wave Rectification and have seen that it rectifies the half wave of the AC signal. Today, we are going to study Full Wave Rectification to rectify the complete AC source. We will design the simulation of the Full Wave Rectifier in Proteus software. So, let's get started:
What is Full Wave Rectification?
A comprehensive definition of full-wave rectification is:
Full-wave rectification
is a process to convert both cycles(positive & negative) of input(sinusoidal) wave to pulsating DC
(Direct current).
We have studied in the previous lecture that Half Wave Rectifiers are used to convert only one cycle(either positive or negative) of an AC signal into a DC signal, thus dissipating the 50% energy of the o ...
Hello Pupils! I welcome you to The Engineering Projects. I hope you are having a good day. In our previous lectures, we simulated almost all the DLD Logic Gates i.e. AND, OR, NOT, NOR, NAND, XOR and XNOR. I hope now you must have a complete understanding of the logic gates and their working.
Now, it's time to have a look at the reason for inventing these logic gates. These DLD logic gates are used to design different numerical modules i.e. adder, subtracter, multiplexer, de-multiplexer, encoder, decoder etc. These arithmetic modules are normally used in electronic products i.e. a simple microcontroller has numerous adders/subtractors for properly calling the registers' addresses.
So, from today onward, we are going to discuss these applications of logic gates one by one. Today, we wi ...
Hello friends, hope you all are fine and enjoying in your life. In the previous post, we have seen How to use Oscilloscope in Proteus ISIS, today I am going share a new and a very important Tutorial which is How to Design a 5V Power Supply in Proteus? This project is very simple and of basic level but importance of this project is that it is used as a base in almost all large electronics project, designed now-a-days. When I start working on any project then the first thing, I need to design is this DC power supply, because without powering up the components, we can't use them. :)
While designing a 5V Power Supply in Proteus ISIS, we will be using Voltage Regulator IC, which is commonly known as 7805. This voltage regulator is used to regulate or c ...
Hello everyone, I hope you all are doing great. In today's tutorial, I am going to share a new version of Heart Beat Sensor Library for Proteus i.e. version 2.0. I have already posted the First Version of the Heart Beat Sensor Library for Proteus in which you can use the TestPin and if it's HIGH then a single heartbeat pattern will start. So, if you use that library, you will always get the same result for your heartbeat. But in this 2nd version, I have added variable heartbeat depending on the value of TestPin. I will show you in detail, how to do it.
I have also posted a project Heart Beat Counter using Arduino in which I have shown you How you can use this sensor and count your Heart Beat. So, let me show you How you can use this new Heart ...
Hello friends, I hope you all are well. Today, we are going to share the second version of the Solar Panel Library for Proteus. You should also have a look at the first version of the Solar Panel Library, which we have posted around 2 years back and we were receiving suggestions to reduce its size as there's less space left for other components.
That's why we have designed this new Solar Panel Library and have reduced the size of the solar panel. We have also added a new black solar panel component to it. So, this library contains 2 solar Panel modules in it. First, let's have a look at a brief introduction to Solar Panel and then will download the Proteus Library zip file.
What is Solar Panel?
Solar Panels are designed using solar cells compos ...
