Hello friends, hope you all are fine and having fun with your lives. Today, I am going to share an informational tutorial about top 10 PCB design Software. These PCB design software are used for designing PCBs. In all engineering projects especially related to electronics, PCB designing is an important task and in order to design the PCB we have to use some software. There are many software available in market and today, I am gonna give a complete list of PCB Design software.
Few of these software and free to use and few have limited versions available but in order to get their advanced features you have to buy them. I have also mentioned their features below. If you have read my blog in detail then must have the idea that I use Proteus software f ...
Yesterday, I have posted a new Arduino Lilypad / Nano Library for Proteus in which we have seen how to add that library into Proteus so that you could be able to use these boards in Proteus. That was quite easy. Today I am gonna post a small project in which we will see how to use that library and produce an Arduino Lilypad simulation in Proteus. In this Arduino Lilypad simulation in Proteus, I am gonna use obviously he Arduino Lilypad board along with few LED lightsand will make them blink. Its also quite easy and you can also download the simulation and the hex file at the end of this project but I would suggest you to do it yourself so that you learn something out of it.
Before starting this project, you must have first integrated the Arduino L ...
Hey Guys! Glad to see you here. I welcome you on board. In this tutorial today, I’m going to share the Analog PIR Sensor Library for Proteus. We have already shared the digital PIR Sensor Library for Proteus V1.0. Moreover, you should also check the latest version of PIR Sensor Library V3.0. If you don’t know what is PIR sensor, you must read this post first where I’ve briefly discussed the Interfacing of PIR sensor with Arduino.
PIR (Passive Infrared Sensor) also known as a motion sensor, is used to detect motion using infrared rays. It is used in banks for security purposes. It can detect the presence of a person by identifying their motion inside. Similarly, it is used in home automation where it detects the movement in the room, giving a signal we need to turn on the light because ...
Hello Learners! welcome from the team of The Engineering Projects. We hope you are having a productive day. We are working on a series of Blogs based upon the core knowledge about Digital Logic Gates and Circuits. In this tutorial, we'll know about the SR Flip Flops and after brief introduction we will simulate SR Flip Flops in Proteus. Let's have a glimpse on the topics of today:
What are Flip Flops?
What are the types of Flip Flop?
How does we design the Truth Table of SR Flip Flops?
What are further classes of SR Flip Flips?
Implementation of SR Flip Flops in Proteus.
Flip Flops
Flip Flops are extremely important Circuits of Digital Logic Design. We Introduce the Flip Flops as:
"Flip Flops are type of sequential Logic Circuit that co ...
Hey pupils, welcome to The Engineering Projects. We hope you are doing great. In today's simulation in Proteus ISIS, we'll seek the knowledge of an interesting topic. We are going to design a Television remote jammer in Proteus. We all are familiar with the TV Remote controller device and know it works when a light signal emitted by it is sensed by the television. Have a glance at the topics we will see in detail today:
Introduction to 555 Timer TV Remote Control Jammer.
Components of the circuit.
Working principle of 555 Timer Jammer.
Simulation of the Jammer of TV Remote Control using 555 Timer.
Moreover, you will also learn some interesting facts about the topic in DID YOU KNOW sections. let's jump to our first topic.
555 Timer TV R ...
Hello friends! I hope you are having a good day. Today, I am sharing a new version of Arduino Library for Proteus(V3.0). I have already shared the previous versions of this library i.e. Arduino Library for Proteus(V1.0) and Arduino Library for Proteus(V2.0). This newer version is way better than previous versions because of its realistic design and better performance. I will discuss the comparison in detail in just a bit. This Proteus Library zip file has the following types of Arduino microcontrollers in it:Arduino UNOArduino Mega 1280Arduino Mega 2560Arduino MiniArduino Pro MiniArduino Nano
We will move towards the installation, but before this, let me share the basic introduction of Arduino.
What is Arduino?
Arduino is an open-source family of microcontroller boards that is designe ...
Hello friends, hope you all are fine and enjoying in your life. In the previous post, we have seen How to use Oscilloscope in Proteus ISIS, today I am going share a new and a very important Tutorial which is How to Design a 5V Power Supply in Proteus? This project is very simple and of basic level but importance of this project is that it is used as a base in almost all large electronics project, designed now-a-days. When I start working on any project then the first thing, I need to design is this DC power supply, because without powering up the components, we can't use them. :)
While designing a 5V Power Supply in Proteus ISIS, we will be using Voltage Regulator IC, which is commonly known as 7805. This voltage regulator is used to regulate or c ...
Hello everyone, I hope you all are doing great. Today, I am going to share a new L298 Motor Driver Library for Proteus. It has never been designed before and we are proudly presenting it for the first time. I hope you guys are gonna like it. You should also have a look at DC Motor Speed Control using L298 in which I have used the same module in hardware design. But today we are gonna see it in action in Proteus Simulation and its quite exciting for me as well. :)
If you don't know much about L298 then you should also have a look at Introduction to L298, in which I have discussed the basics of L298 module, it will be quite informative for you. If you got into any trouble regarding this L298 Motor Driver Library for Proteus, then you can ask in comm ...
Hello Pupils! I welcome you to The Engineering Projects. I hope you are having a good day. In our previous lecture, we discussed Half-Adder Circuit Designing with XOR and AND logic gates. Today, we are going to design the same circuit using universal logic gates i.e. NOR and NAND gates.We are going to learn the following topics, in today's lecture:
What is Adder?
What is Half Adder?How can We make Half Adder Circuit through NAND Gate?
How can We make Half Adder through just NOR Gate?
Hence without wasting time, Let's find all the Answers.
What is Adder?As we discussed in the last lecture, the DLD Adder is a simple electronic circuit, used to add binary numbers in bit form.There are two types of DLD Adders, named:
Half Adder
Full Adder
In this article, we'll f ...
Hello friends, I hope you all are doing great. In today's tutorials, I am gonna share a new C945 Library for Proteus. If you have searched for this transistor in Proteus, then you must have known that it's not available in Proteus. We have designed this transistor in Proteus and here's its library.
If you don't know much about this transistor then you should have a look at Introduction to C945, in which I have explained in detail the basics of this transistor. Today, first of all, I will show you How to install this library and after that we will design a simple Proteus Simulation in which we will see How to simulate C945 in Proteus. You should also check this amazing list of New Proteus Libraries for Engineering Students. So, let's get started wi ...
