Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at a detailed Introduction to MAX30100. MAX30100 is a heart pulse rate monitor sensor. This sensor consists of two Light Emitting Diodes (LEDs), (one emits infrared light and the other emits red light) modifiable optics, low noise signal processor that detects heart pulse rate signal. Its operating voltage is from 1.8v to 3.3v.
The MAX30100 is used in different industrial and medical equipment such as fitness measurement devices, medical devices, and different wearable instruments. In today's post, we will have a look at its working, pinout, protocol, features, etc. I will also share some links where I have interfaced it with other microcontrollers. If you have any questions about it please ask ...
Hi Friends! I welcome you on board. Thank you for clicking this read. In this post today, I’ll detail the Introduction to IRF740.The IRF740 is an N-channel power MOSFET used for extremely fast switching applications. It comes with a power dissipation of around 125W and can support loads up to 400V. The maximum drain current of this device is 10A and the drain-source capacitance is 1450pF.
I suggest you read this post till the end as I’ll describe the complete Introduction to IRF740 covering datasheet, pinout, features, and applications.
Introduction to IRF740
The IRF740 is an N-channel MOSFET that comes with 125W power dissipation. This is the power device that dissipates during the working of this component.
This device is mainly used for fast switching applications and comes ...
Introduction
Hello friends, I hope you are doing very well. Today we are going to learn and practice the master control reset (MCR)! So what is that MCR? Well! This is a tool you might use to control a group of devices with one push button for performing fast emergency responses with one click for a group of devices in one zone. In another word, you divide the program into zones and put this zone between a master control to control their operation as one unit by one contact. This technique is useful for applying emergence stops and also protecting some equipment by applying a safety restriction to not operate when that condition is in effect.
The concept of the master control reset (MCR)
Figure 1 shows the master control relay in a ladder logic showing a couple of rungs between the ma ...
Hello friends, I hope you all are happy, healthy, and, content. Today, our discussion is all about "Diodes". Whoever has been a science student, knows about diodes. Although it seems to be a tiny component of a circuit, apparently it is true but it has a lot of complexities or you can say, it's a storm in a teacup. You might have read a lot about diodes in physics, in today's discussion we would be moving step by step into the pool of diodes from definition to working of diodes, their types, and then lastly its applications. Let's get started!
Diode Definition
First things first, Let's define diode,
A diode is a basic discreet electronic component made up of semiconductor material, used in electronic circuits, which allows unidirectional c ...
Hi Guys! Hope you all are doing great! We always feel happy when you come back again and again for useful information so you can excel and grow in your relevant field. Today, I am going to unlock the details on the Introduction to 2n2219. It is an NPN (negative-positive-negative) bipolar junction transistor (BJT) which is specially designed for a small signal general purpose and switching applications. It contains P doped semiconductor that lies between the two layers of N doped material.
You can also check an Introduction to 2n2905 which is a complementary PNP transistor of this NPN transistor.
I'll try to cover every aspect related to this transistor so you don't need to go anywhere and you find all information in one place. Let's dive in and ...
Hello friends! I hope you will be absolutely fine and having fun. Today, I will give you a detailed discussion about Introduction to 75N75. I have also shared different articles on Introduction to 2N3904, 2N3906, BC547, C945 and IRF540. You must go through all of these articles for the better understanding of this tutorial. 75-N75 is basically a Metal Oxide Field Effect Transistor (MOSFET). MOSFET is a transistor which is frequently used in electronic devices for the amplification and fast switching purposes.
MOSFET consists of four different terminals. These terminals include body terminal, source, drain and gain respectively. There two different type of transistors i.e. P-channel transistor and N-channel transistor. 75N-75 is N-channel MOSFET. ...
Hi everyone! Thank you for viewing this article, I welcome you on board. In this post I’ll walk you through the detailed Introduction to BC546. BC546 is a low power NPN transistor mainly used for general purpose amplification and switching applications.
In this read you’ll study all nitty-gritty of BC546 transistor i.e. from pinout, pin configuration, and working principle to power ratings, key parameters, physical dimensions and applications. Keep reading.
Introduction to BC546
BC546 is a bipolar junction NPN transistor that finds applications in switching, amplification, impedance, H-bridge and current mirror circuits.
This transistor falls in silicon epitaxial planar transistor category which is generally divided into three groups A, B &am ...
Hello everyone! I hope you all will be absolutely fie and having fun. Today, I will elaborate you about Introductio to NE556 timer IC. NE-556 is a lot stable monolithic device. We can use precise delays and oscillation by using this device. NE 556 is bsically an dual version of NE 555 timer IC. Timing is provided for each function using an external capacitor and resistor. There are two internal timers which operates independently. They just share common power supply and ground. For the falling or rising wave forms we can trigger or reset the entire circuit.
The trigger level and the threshold levels are usually one third and two third respectively. We can alter both of these level by using control pin of NE-556. If the input at trigger falls bel ...
Hi Everyone! I hope you all are doing great. I am back to whet your appetite with daily dose of information and knowledge that puts you ahead from others and makes you stand out of the party. Today, I am going to give you the Introduction to 2n7000. It is an enhancement type N-Channel MOSFET which is mostly used for low power switching applications. It comes with different current ratings and lead arrangement. I am going to give you a brief detail about this component, so you don't have to go any where else to find information regarding this device. Let's get started.
Introduction to 2n7000
2n7000 is a uni-polar N-Channel Enhancement mode MOSFET which comes with terminals called drain source and gate.
In this transistor, the input voltage app ...
Hello friends, I hope you all are doing great. In today’s tutorial, we will have a look at Introduction to PT2272. It is a CMOS (complementary metal-oxide-semiconductor) that use to design simple wireless controlling of instruments installed at some distance. This module is normally used for controlling the circuits of garage door, speed control of the fan, robots and for monitoring the alarm connected at different places for security purposes.
This integrated circuitry uses non-variable code address and no built-in encryption due to these parameters it not used for such circuits where high security is need but uses only for small or less cost security circuits such as used in home security alarms etc. In today's post, we will have a look at its w ...
