Project Files of Proteus Library of Single Cell Battery

This is the download page of Proteus Library Files, the file package of the tutorial Proteus Library of Single Cell Battery, published on The Engineering Projects in May 2021. Here you get the ZIP file (34.4 KB) with the Proteus library files (LIB and IDX) and a ready Proteus simulation, the list of files it contains, the README when there is one, and the installation steps in order.

What this library is

Proteus Library Files adds Proteus Library to Proteus as a schematic component: once installed, the part appears in the Pick Devices list under its own name, with its real pin layout, and can be placed and wired like any built-in device. It is a symbol-and-footprint library: it draws and routes the part; to see it work in simulation, pair it with the HEX file or the controller model as the tutorial shows.

What is inside the ZIP file

• SingleCellBattery.LIB – Proteus library, 21.3 KB
• SingleCellBattery.IDX – Library index, 996 B
• Proteus Simulation.DSN – Proteus simulation, 114.3 KB
• Last Loaded Proteus Simulation.DBK – DBK file, 114.3 KB
• Proteus Simulation.PWI – PWI file, 5.6 KB

The archive unpacks to 256.5 KB; there is no README inside, so the steps below stand in for it.

How to download

Use the download panel at the top of this page: after the counter (30 seconds for guests, 10 for members) the black button unlocks and ProteusLibraryofSingleCellBattery.zip comes straight from our content network. If the browser opens it instead of saving, use Save as; extract the whole archive before using anything inside it.

How to install

• Step 1: Extract ProteusLibraryofSingleCellBattery.zip with Windows (Extract All), 7-Zip or WinRAR, keeping its folders.
• Step 2: Close Proteus and copy SingleCellBattery.LIB and SingleCellBattery.IDX into its LIBRARY folder (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY).
• Step 3: Start Proteus, press P and search for "SingleCellBattery"; place and wire it as in the tutorial.
• Step 4: Open Proteus Simulation.DSN in Proteus and press Play.

Simulation and results

The included Proteus project (Proteus Simulation.DSN) is the quickest way to see Proteus Library working: open it, press Play and compare with the screenshots in the tutorial. If nothing runs, make sure every library file was copied before Proteus started and that Program File points at the HEX on your disk; the FAQs tab covers the usual causes.

Read the detailed guide

This page is for the files. The full tutorial, Proteus Library of Single Cell Battery, explains the circuit and the code step by step and shows the working results and the simulation; read it before you build. Questions about the download or the installation go in the comments below; more Proteus downloads are listed further down this page.

The package is free for personal, educational and research projects; credit The Engineering Projects and link to this page when you share it rather than re-uploading the file.